Black Range Drilling Assays Returned and Exploration Update
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
18 July 2024
Diamond Drilling Assays Returned at Sugarbag Hill, Black Range
and Project Wide Exploration Update
Regional rock chip results up to 1,440g/t Ag and 2.06g/t Au highlight system scale
Diamond drill assays returned at Sugarbag Hill Prospect
•
•
•
The first deeper diamond drilling intercepted epithermal style veins and alteration but have
returned no significant results and have not intersected the mineralised feeding structures.
Both holes confirmed the presence of a low-sulphidation style epithermal system, and while a
larger drill campaign was approved, the decision to only complete two holes was to ensure
targeting of the potential feeder structures could be refined with the latest geological knowledge.
The Sugarbag Hill Prospect remains a priority target area for the Company with the source of the
large 2.2km long trend in soil sampling of >20ppb Au (up to 296ppb Au) yet to be confirmed.
New gold-silver prospects identified along 30km strike
•
•
•
69 rock chip samples collected during recent reconnaissance field work.
Rock chip results highlight Mt Mylora (up to 1,440g/t Ag and 1.51g/t Au) and Winooka Reef (up
to 2.06g/t Au) as areas for priority follow-up.
Highly encouraging are results from ground-truthing of regional radiometric anomalies that
returned gold and silver (up to 0.46g/t Au and 47.8g/t Ag) in rock chip samples.
ASTER data highlights district-scale potential
•
•
An interpretation of ASTER (Advanced Spaceborne Thermal Emission) hyperspectral data has
highlighted extensive new areas within the Black Range Project for follow-up.
A total of 28 anomalies consistent with the signatures of low and intermediate sulphidation
epithermal gold-silver mineral systems have been identified.
Next Steps
•
•
•
A soil program was completed over the Mt Mylora Prospect with results expected end of August.
The results of that Mt Mylora soil campaign will inform potential follow-up exploration, which may
include ground geophysics prior to drill testing.
Ground-truthing will also aim to follow up newly identified regional gold-silver anomalies.
Figure 1: Rock chip float sample returned 1,440g/t Ag and 1.51g/t Au.
See ‘Endnotes’ on page 21 for references
Page 1 of 21 | ABN 43 650 398 897
3/202 Russel Street Bathurst, 2795
www.legacyminerals.com.au
ASX: LGM
Page 2 of 21
Legacy Minerals Holdings Limited (ASX: LGM, “Legacy Minerals” or the “Company”) is pleased to
provide an update on its first diamond drilling campaign and regional rock chip sampling results at the
100%-owned Black Range Project (EL9464 and EL9589) in NSW.
Management comment – Legacy Minerals CEO & Managing Director, Christopher Byrne said:
“With the initial diamond drilling at the Sugarbag Hill Prospect complete and assays recently returned,
the team now moves to incorporate the new information into follow up targeting. This first-pass,
deeper diamond drilling at the Prospect has not defined the source of the strong gold-in-soil anomalism
on surface. However, it has provided good geological evidence for the potential of the system further
west that requires follow up work.
“The decision to only complete two holes has preserved sufficient funds to build our knowledge of this
underexplored district and conduct further generative work and future drill testing at Sugarbag Hill
and regionally across the Black Range Project. The Sugarbag Hill Prospect still remains a priority target
area for the Company with the source of the large 2.2km long trend in soil sampling of >20ppb Au (up
to 296ppb Au) yet to be confirmed.
“The case for an economic gold-silver discovery on the Black Range Project is strengthened by the
growing gold and silver anomalism across 30km of strike and the recent regional rock chip results that
graded up to 1,440g/t Ag and 2.06g/t Au. These findings are particularly compelling as there is little
to no drilling at any of these latest gold and silver anomalies. Multiple ASTER, radiometric and
magnetic anomalies remain to be field-checked that have very similar characteristics to those that
returned up to 0.46g/t Au through this reconnaissance field work.
“The collection and interpretation of ASTER data is the first-time satellite spectral data has been
acquired and interpreted over the Black Range Project. The results support our view that this Project is
highly prospective for large-scale gold-silver epithermal mineralisation. Legacy Minerals successfully
used the same ASTER technology at the Bauloora Project – which is currently being explored with our
farm-in JV partner Newmont – and we are excited to have now defined district-scale potential at Black
Range. The Company will focus on incorporating this data with our other geoscientific datasets to
further define compelling targets for drill testing.”
Summary of Rock Chip Results
The Legacy Minerals field team collected 69 rock chip samples across the regional project area. New
areas were identified as being potentially prospective based on a review of radiometric, magnetic,
ASTER and historic sampling data.
Laboratory assays completed through ALS Orange and Brisbane were analysed for 49 elements. The
rock chip results have identified new gold and silver mineralised areas with standout silver results of
1,440g/t, 47.8 g/t, 40 g/t and 18.6 g/t as well as gold results including 2.06g/t, 1.51g/t, 1.38g/t, 1.3g/t
and 1.28g/t.
Some of these anomalous gold results occur in areas where no previous exploration activities have
been conducted and are considered newly discovered mineralised zones.
The gold results sit approximately 5km and 10km north of the Sugarbag Hill Prospect and
approximately 5km south of Mt Mylora. Preliminary observations of the rock chips indicate that the
mineralisation may be of a similar style to that observed in rock chips at Sugarbag Hill.
The result of this work supports the interpretation that the Mountain Creek volcanics is highly
prospective for epithermal mineralisation.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 3 of 21
Figure 2: ASTER anomalies and rock chip samples taken during recent field work.
ASTER Results
The ASTER is one of five “state-of-the-art” instrument sensor systems operating on the Terra
spacecraft. ASTER utilizes a unique combination of wide spectral coverage and high spatial resolution
in the visible near-infrared through shortwave infrared to the thermal infrared regions. It is a
partnership between NASA, Japan's Ministry of Economy, Trade and Industry, the National Institute
of Advanced Industrial Science and Technology in Japan, and Japan Space Systems.
The 28 alteration anomalies were interpreted by Global Ore Discovery Pty Ltd using a combination of
alteration mineral distribution, abundance, composition and crystallinity maps.
Anomalies were characterised by a summary alteration assemblage, and have been attributed if they
intersect iron oxide, silica and quartz responses, their proximity to or on strike from a major structure,
radiometric and magnetic response, and the host lithology.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 4 of 21
ASTER alteration anomalies associated with known mineral occurrences are dominantly coincidental
argillic/phyllic ASTER anomalies such as that associated with the Sugarbag Hill epithermal gold-silver
Prospect.
These correspond with a broad increase in the K-Band, supporting potassium enrichment associated
with hydrothermal fluids and the interpreted alteration assemblages. Silica trend lines run parallel to
mapped faults and lineation of the ASTER anomalies.
A decrease in magnetic signal may indicate magnetite destruction within host lithologies, as expected
with hydrothermal fluid ingress focused along the structures. ASTER anomalies strongly correlate with
predominantly N-S structures and areas of structural complexity (1st, 2nd and 3rd order faulting).
Figure 3: ASTER anomalies across the Bauloora Project area.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 5 of 21
Summary of Drilling
Sugarbag Hill is located in an underexplored area of the Lachlan Fold Belt, NSW. Mineralisation is
hosted within early I-type Devonian felsic rocks of the Mountain Creek Volcanics. Indications of a
preserved epithermal sinter were identified during ground reconnaissance of historically mapped
“cherts” within the Prospect area. Petrography has now confirmed an extensive silica sinter related
lithology at the Prospect. Alteration at the Prospect is moderate to intense silica-sericite +/- pyrite in
association with the exposed agglomerate and ignimbrite hosted in the Mountain Creek Volcanics i.
Drilling at the Sugarbag Prospect comprised two diamond core holes as a first pass program designed
to test identified coincident Induced Polarisation (IP) resistivity highs and surface geochemical targets
believed to be associated with easterly dipping low-sulphidation epithermal feeder veins.
The strongly resistive IP targets were identified by Legacy Minerals to be closely associated with a
2.2km long gold-in-soil trend with single point anomalies up to 296ppb Au. Within the gold trend, a
higher-grade gold zone approximately 800m long occurs with single point anomalies averaging
107.5ppb Au. In addition to the extensive soil anomalies, recent rock chip samples collected along the
resistivity trends confirmed altered with some samples gold and silver bearing returning assays up to
2.27g/t gold and 29.6g/t silver.
Two diamond holes were completed at the Sugarbag Hill Prospect for a total of 870.7m. The drilling
intersected variably altered felsic pyroclastic rock units comprising mostly welded fine to medium
grained ignimbrite and polymictic clast-rich ignimbrites. Zones of volcanic breccia with strong to
intense silicification were also noted in geological logging of the core holes. Numerous quartz veins
were intersected across both drill holes with some veins displaying low-sulphidation epithermal
textures and mineralogy including quartz-adularia veins (+/- chalcedony) and potential boiling zone
textures with fluorite-bladed carbonate infill veins.
Drill hole SB001 intercepted a series of dominantly welded ignimbrites. The top of SB001 consists of
weathered polymict volcanic conglomerate or breccia sitting on top of a feldspar-phyric ignimbrite
with a small interval of fine grained volcaniclastics. Below this ignimbrite the drilling intercepted a
polymictic clast-rich ignimbrite, volcanic breccia and conglomeratic unit before ending in a crystal-rich
ignimbrite. Alteration across the entire drill hole consisted of mostly weak to moderate pervasive
silica-chlorite-sericite alteration of the rock with localised strong to intense silica-sericite alteration
adjacent to zones of quartz-carbonate veining. Selective chlorite-sericite alteration occurred in pumice
or lithic clasts. A 10m wide zone of polymict volcanic conglomerate or breccia was intersected at 276m
with intense silica alteration. The upper contact zone of the breccia unit was signified by a fault zone
and strong quartz-adularia veining. Minor disseminated and vein hosted pyrite mineralisation was
observed throughout SB001 with clast-rich units sporadically displaying trace sphalerite-chalcopyrite
blebs within silica altered clasts.
Drill hole SB002 intersected a single unit of polymict volcanic conglomerate of ignimbritic composition
that contained a pebbly matrix with occasional zones of ignimbritic blocks >64mm in size with some
blocks potentially greater than 1m in size, suggestive of a relatively near-vent depositional setting.
Overall, alteration across the drillhole was mostly moderate to strong pervasive silica alteration with
zones of strong carbonate alteration within the matrix of the clast-rich intervals. Mineralisation
intersected in the drill hole comprised very fine disseminated pyrite in the matrix surrounding the
clasts and occasional pyrite stringers from 11m to approximately 60m. Rare blebs of sphalerite and
chalcopyrite occur in clasts and as disseminations in the matrix sporadically throughout the hole.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 6 of 21
Based on pathfinder geochemistry and structural observations it is interpreted that the easterly
dipping resistivity features thought to be the down dip extensions of gold bearing mineralised zones
on surface are due to unmineralised strongly silicified units intersected within the ignimbrite package.
While anomalous zones of pathfinder elements were intersected in drilling these did not correlate
with the interpreted orientation of a potential feeder structure nor elemental associations with gold
and silver in historic drilling, soils and rock chips and though interpretation is at an early stage, suggests
a westerly dip to mineralisation.
Figure 4. Sugarbag Hill gold in soils samples ii, with LGM drill holes and historical Newcrest drilling iii
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 7 of 21
Figure 5: Cross section of SB001 showing interpreted geologyiii
Figure 6: Cross section of SB002 showing interpreted geologyiii
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 8 of 21
Table 1 Drill hole collar and significant interval details for LGM diamond holes.
Hole ID
Easting
(MGA94/55)
Northing
(MGA94/55)
RL (m)
Dip
Azimuth
(True North)
Depth
(m)
Drill hole
status
Assay
Results
SB001
658437
6140113
634
-60
250
453.2
Completed
NSR
SB002
658248
6141415
667
-55
270
417.5
Completed
NSR
Significant intervals defined using >=0.1g/t Au or >=10g/t Ag or >=0.25% Cu, >=0.25% Pb+Zn, >=1m
downhole width, and <=1m internal waste. All intercepts are down hole widths only, true widths are
not calculated. Collar location and orientation information coordinates are GDA94/MGA Zone 55, AHD
RL. See Appendix 1 for additional details. No Significant Result (NSR)
Highlight Rock Chip Results
Table 2: Highlight Rock Chip Results
Sample
Prospect
Easting
(MGA94/55)
Northing
(MGA94/55)
Au
g/t
Ag
g/t
Cu ppm
Pb
ppm
Zn
ppm
9064
9050
9048
9042
9062
9063
9060
9068
9045
9061
9049
9054
9047
9157
9069
9070
9043
9056
Winooka Reef
Mt Mylora
Mt Mylora
Mt Mylora
Winooka Reef
Winooka Reef
Winooka Reef
Unnamed
Mt Mylora
Winooka Reef
Mt Mylora
Unnamed
Mt Mylora
Sugarbag Hill
Unnamed
Sugarbag Hill
Mt Mylora
Unnamed
6151576.85
6155696.85
6155770.39
6156003.73
6151565.09
6151575.9
6151576.21
6152936.54
6156156.95
6151561.15
6155696.85
6148103.6
6155765.59
6141140.07
6153340.08
6142568.06
6156003.5
6150736
653901.97
654098.59
653979.84
653878.41
654067.38
653912.21
654085.88
656347.52
653817.49
654083.98
654098.59
656783.11
653981.59
658008.5
655965.94
658610.99
653878.4
658076
2.06
1.51
1.38
1.3
1.28
0.804
0.693
0.459
0.442
0.419
0.358
0.31
0.246
0.214
0.202
0.202
0.101
0.048
3.17
1440
2.83
5.78
9.61
0.36
0.53
4.15
40
0.58
1
0.67
2.07
0.34
0.5
0.96
4.41
47.8
3710
285
622
105
25.4
507
51.4
43.7
77.1
68.8
42.5
125.5
56.2
5.2
119.5
419
29.5
20.4
7.2
2380
1845
1150
25
4.1
45.3
20
105.5
8.3
284
363
1055
46.1
11.8
11
367
114
10
157
391
40
36
11
9
95
8
61
38
84
57
5
79
18
14
140
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 9 of 21
About Black Range
The Black Range Project is in the Central Lachlan Fold Belt, NSW, which hosts world-class copper-gold
orebodies including the Cadia-Ridgeway, Northparkes and Cowal Mines. Black Range is a late
Devonian, early Silurian volcanic system dominated by acid volcanics. Rhyolite to dacitic volcanism
with lavas, breccias and tuffs are widely distributed and associated with epithermal mineralisation.
Limited exploration defining a 5.2km2 zone of silica-sericite-pyrite alteration has been mapped with
low-sulphidation gold mineralisation intercepted in historical shallow percussion and diamond drilling
at the Sugar Bag Hill Prospect giving encouragement to the prospectivity of the wider tenement. The
interpreted low temperature quartz and low-iron sphalerite that is associated with gold mineralisation
indicates the Project may host a large, preserved epithermal environment.
Figure 7: Location of the Black Range Project and Major Deposits in NSW iv
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 10 of 21
Approved by the Board of Legacy Minerals Holdings Limited.
For more information:
Investors:
Chris Byrne
CEO & Managing Director
chris.byrne@legacyminerals.com.au
+61 (0) 499 527 547
Media:
Nicholas Read / Kate Bell
Read Corporate
info@readcorporate.com.au
+ 61 (0) 419 929 046
DISCLAIMER AND PREVIOUSLY REPORTED INFORMATION
Information in this announcement is extracted from reports lodged as market announcements referred to above
and available on the Company’s website https://legacyminerals.com.au/. The Company confirms that it is not
aware of any new information that materially affects the information included in the original market
announcement and that all material assumptions and technical parameters underpinning the estimates in the
relevant market announcement continue to apply and have not materially changed.
This announcement contains certain forward-looking statements. Forward looking statements are only
predictions and are subject to risks, uncertainties and assumptions which are outside of the control of Legacy
Minerals Holdings Limited (LGM). These risks, uncertainties and assumptions include commodity prices,
currency fluctuations, economic and financial market conditions, environmental risks and legislative, fiscal or
regulatory developments, political risks, project delay, approvals and cost estimates. Actual values, results or
events may be materially different to those contained in this announcement. Given these uncertainties, readers
are cautioned not to place reliance on forward-looking statements. Any forward-looking statements in this
announcement reflect the views of LGM only at the date of this announcement. Subject to any continuing
obligations under applicable laws and ASX Listing Rules, LGM does not undertake any obligation to update or
revise any information or any of the forward-looking statements in this announcement to reflect changes in
events, conditions or circumstances on which any forward-looking statements is based.
COMPETENT PERSON’S STATEMENT
The information in this Report that relates to Exploration Targets, Exploration Results, Mineral Resources or Ore
Reserves is based on information compiled by Thomas Wall, a Competent Person who is a Member of the
Australian Institute of Geoscientists. Mr Wall is the Technical Director and a full-time employee of Legacy
Minerals Pty Limited, the Company’s wholly-owned subsidiary, and a shareholder of the Company. Mr Wall has
sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and
to the activity being undertaken to qualify as a Competent Person as defined in the 2012 edition of the
Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Wall consents
to the inclusion of the matters based on his information in the form and context in which it appears in this
announcement.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 11 of 21
About Legacy Minerals
Legacy Minerals is an ASX listed public company that has been involved in the acquisition and exploration of gold, copper,
and base-metal projects in NSW since 2017. The Company has nine projects that present significant discovery opportunities
for shareholders.
Au-Ag Black Range (EL9464, EL9589)
Caldera setting with extensive epithermal occurrences. Limited
historical exploration across 30km of known prospective strike.
Cu-Au Rockley (EL8926)
Prospective for porphyry Cu-Au and situated in the Macquarie Arc
Ordovician host rocks with historic high-grade copper mines that
graded up to 23% Cu.
Au-Ag Bauloora (EL8994, EL9464) Newmont JV
One of NSW’s largest low-sulphidation, epithermal systems with a
27km2 epithermal vein field.
Cu-Au Glenlogan (EL9614) S2 Resources JV
Large, undrilled magnetic anomaly underneath Silurian cover
located 55kms from Cadia Valley.
Cu-Au Drake (EL6273, EL9616, ELA6642)
Large caldera (~150km2) with similar geological characteristics to
other major pacific rim epithermal deposits.
Au-Cu (Pb-Zn) Cobar (EL9511)
Undrilled targets next door to the Peak Gold Mines. Several
priority geophysical anomalies and gold in lag up to 1.55g/t Au.
Au Harden (EL9657)
Large historical high-grade quartz-vein gold mineralisation.
Drilling includes 3.6m at 21.7g/t Au 116m and 2m at 17.17g/t Au
from 111m.
Au-Cu Fontenoy (EL8995) Earth AI Alliance
An 8km long zone of Au and Cu anomalism defined in soil
sampling and drilling. Significant drill intercepts include 79m at
0.27% Cu from 1.5m.
Cu-Au Thomson (EL9190, EL9194, ELA6777)
Perspective for iron oxide copper-gold and intrusion related gold systems, the project contains numerous ‘bullseye’ magnetic and
gravity anomalies that remain untested.
Figure 8: Location of Legacy Minerals Projects in NSW, Australia v
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 12 of 21
Appendix 2 – JORC Code, 2021 Edition Table 1
Section 1 Sampling Techniques and Data
Criteria
JORC Code Explanation
Nature and quality of sampling (e.g., cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments,
etc). These examples should not be taken as
limiting the broad meaning of sampling.
Commentary
Rock sampling of a reconnaissance nature was
undertaken across the Black Range Project and
was biased towards rock outcrop.
Core size was HQ core (diameter: 63.5mm) or
NQ core (diameter: 47.5mm) to end of hole
(EOH). LGM used a reputable drilling contractor,
Durock Drilling, with a suitable rig. Diamond drill
core provide a high-quality sample that is logged
for lithological, structural, geotechnical, and
other attributes. Sub-sampling of the core is
carried out as per industry best practice.
The purpose of the rock chip samples was to
establish the tenor of any mineralisation visible
in outcrop and float. Therefore, the samples are
biased towards mineralised samples. This is
appropriate for this type of work.
Downhole surveys of dip and azimuth are
conducted using a single shot camera every
30m, and using a downhole Gyro when
required, to detect deviations of the hole from
the planned dip and azimuth. The drill‐hole
collar locations are recorded using a hand‐held
GPS, which has an accuracy of +/‐ 5m. All drill‐
hole collars may be surveyed to a greater
degree of accuracy using a certified surveyor at
a later date.
Sampling
Techniques
Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
An Olympus Vanta pXRF is used to spot analyse
the drill core onsite. Readings are taken to help
identify minerals and alteration with field
calibration of the pXRF instrument using
standards periodically performed.
The handheld pXRF results are only used for
preliminary assessment of element
compositions, prior to the receipt of assay
results from the certified laboratory.
The drill core was orientated using suitable core
orientation tool by the drilling contractor with
LGM staff supervision. These orientations are
extended onto the remainder of the core and
meter marks for logging. The visible structural
features (veins, bedding, foliation, faults) are
measured against the core orientation marks.
The drill core was cut in half, and assayed at a
certified assay laboratory, ALS Laboratories.
Core is prepared for analysis by cutting along
the longitudinal line and then samples are
numbered as per the pre-designed cut-sheet.
The core is selectively sampled down the drill
string at 1m nominal intervals across the
mineralised zones, unless selected geological or
mineralisation boundaries. A certified sample
standard is inserted a minimum 1:50 samples.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 13 of 21
Standards may also be added according to
geology.
Where core was incompetent due to being
transported cover or weathered rock,
representative samples were collected along the
axis of the core.
Surface sampling: Samples weighing up to
several kilograms were taken.
Aspects of the determination of mineralisation
that are Material to the Public Report. In cases
where ‘industry standard’ work has been done
this would be relatively simple (e.g. ‘reverse
circulation drilling was used to obtain 1m samples
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there
is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation
types (e.g., submarine nodules) may warrant
disclosure of detailed information.
Drill sampling: The drill core was cut by LGM
staff. Samples were transported to ALS
Laboratory in Orange for assaying. Samples are
crushed to 6mm and then pulverized to 85%
passing 75 microns. A 50g split of the sample
was fired assayed for gold. The lower detection
limit for gold is 0.002 ppm, which is believed to
be an appropriate detection level. All other
elements including copper and base metals
(total 48 element suite) are analysed using a 4acid acid digest and an ICP finish (ALS code: MEMS61 + Au-AA21 + Hg-MS42).
Assay standards, blanks and duplicates were
analysed as part of the standard laboratory
analytical procedures. Company standards were
also introduced into the sampling stream at a
ratio minimum of 1 standard for every 50
samples.
Sample length: Core is sampled in 0.2m to 2m
sample interval lengths except for minor
changes due to geological or mineralisation
boundaries. Pulps are retained by LGM for
potential follow-up analysis.
Drilling
techniques
Drill type (e.g., core, reverse circulation, open‐hole
hammer, rotary air blast, auger, Bangka, sonic,
etc) and details (e.g. core diametre, triple or
standard tube, depth of diamond tails, face
sampling bit or other type, whether core is
oriented and if so, by what method, etc).
Method of recording and assessing core and chip
sample recoveries and results assessed.
Drill sample
recovery
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
Logging
Whether core and chip samples have been
geologically and geotechnically logged to a level
of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical
studies.
Diamond drilling using industry standard
techniques. PQ core (diameter: 85mm) to fresh
rock followed by HQ core (diameter: 63.5mm)
to end of hole (EOH).
Core recoveries were recorded during drilling
and reconciled during the core processing and
geological logging.
Core is measured and marked after each drill
run using wooden blocks calibrating depth.
Adjusting rig procedures as necessary including,
drilling rate, run length and fluid pressure to
maintain sample integrity.
To date, no sample recovery issues have been
identified that would impact on potential
sample bias.
Geological logging is carried out on all rock chips
with lithology, alteration, mineralisation,
structure and veining recorded.
Drilling:
Systematic geological and geotechnical logging
was undertaken. Data collection where
appropriate includes:
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 14 of 21
• Nature and extent of lithologies.
• Relationship between lithologies.
• Amount and mode of occurrence of ore
minerals.
• Location, extent and nature of structures such
as bedding, cleavage, veins, faults etc. Structural
data (alpha & beta) are recorded for orientated
core.
• Geotechnical data is collected as required
including recovery, RQD, fracture frequency,
qualitative IRS, microfractures, veinlets and
number of defect sets. For some geotechnical
holes the orientation, nature of defects and
defect fill may be recorded.
• Bulk density by Archimedes principle at
regular intervals may be taken.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc)
photography.
The total length and percentage of the relevant
intersections logged.
• Magnetic susceptibility recorded at 1m
intervals for some holes as an orientation and
alteration characterisation tool.
Logging of rock chips records lithology,
mineralogy, mineralisation, structures,
weathering, colour and other noticeable
features. Rock chips are occasionally
photographed for reference.
Logging records lithology, mineralogy,
mineralisation, veins, structures, weathering,
colour and other noticeable features. This is
generally qualitative except for % of sulphides
and vein mineral content. Core trays are
photographed in wet form.
All drill holes are geologically logged in full.
Core was cut using a conventional automatic
core saw with core holding support. All samples
are collected from the same side of drill core.
If core, whether cut or sawn and whether quarter,
half or all core taken.
Sub‐sampling
techniques and
sample
preparation
If non‐core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
A half-core sample is submitted for assay
analysis. Where core was incompetent due to
being transported cover, weathered rock, or
soft rock due to faulting, representative samples
were collected along the axis of the core. This
information is recorded in the cut-sheet and
loaded into database.
Not applicable as results are for core drilling.
Surface sampling:
Samples were delivered by Legacy Minerals
Holdings personnel to ALS Minerals Laborato
Share your feedback
Discover