3km Copper-Gold System defined in Drilling Fontenoy
Released
Released
Announcement PDF
Page 1 of 21 | ABN 43 650 398 897
12/217 Howick St, Bathurst, 2795
www.legacyminerals.com.au
See Endnotes on Page 23 for references
Refer to Disclaimer on Page 7
Drilling Outlines 3km Copper-Gold System at Fontenoy with
Legacy Minerals now carried through to Production
Earth AI moves to 80% Joint Venture having drilled 24.5km and funds multi-rig drill-out
towards a maiden Mineral Resource Estimate
LEGACY MINERALS NOW CARRIED THROUGH TO PRODUCTION
Earth AI has met the A$3 million Phase 2 spend and moves to 80% of Fontenoy. Legacy Minerals
retains 20%, carried to production, with no further funding required from Legacy Mineralsi
.
COPPER-GOLD INTRUSION-RELATED SYSTEM GROWING AT MERIDIAN
Copper-gold over 3km of strike at Meridian. Intercepts include:
- 39m at 0.47% CuEq1
(0.35% Cu, 0.12g/t Au) from 192m (EFO59D), incl. 25.8m at 0.60% CuEq
from 193.2m.
- 30m at 0.58% CuEq (0.40% Cu, 0.18g/t Au) from 293m (EFO120D).
- 24m at 0.61% CuEq (0.36% Cu, 0.26g/t Au) from 21m (EFO217D), incl. 12m at 1.00% CuEq
from 33m.
- 12m at 0.86% CuEq (0.06% Cu, 0.82g/t Au) from 72m (EFO159D).
Historical assays at Meridian support potential to extend to 8kmii
. Intercepts include:
- 79m at 0.27% Cu from 1.5m (1-2-10D).
- 22m at 1.00% CuEq (0.34% Cu, 0.67g/t Au) from 20m (WRC-09).
- 14m at 1.08% CuEq (0.37% Cu, 0.72g/t Au) from 108m (1-2-15D).
PLATINUM-PALLADIUM INTERCEPTS GROW POLARIS PGE PROSPECT
9m at 1.65g/t 3E (1.31g/t Pd, 0.25g/t Pt, 0.08g/t Au) from 222m (EFO36D).
10m at 0.48g/t 3E (0.42g/t Pd, 0.06g/t Pt, <0.01g/t Au) from 390m (EFO8D).
THREE RIGS ONSITE WITH MAIDEN MRE PLANNED
Partner-funded three rigs onsite and a fourth to be added in early 2027.
Maiden Mineral Resource Estimate is planned for Q2 2027.
Preliminary mining studies are underway with ongoing metallurgical test work.
1 Copper Equivalent (CuEq) reported for the drill hole intersections was calculated using the following formula: CuEq% = ((Cu% × Cu price per 1% per tonne × Cu
recovery) + (Au g/t × Au price per g/t × Au recovery)) / (Cu price per 1% per tonne × Cu recovery). The metal prices applied in the calculation were: Cu =
US$14,000/t and Au = US$4,000/oz. Recoveries applied were 87% Cu and 93% Au. The entirety of the intersection is assumed as fresh. No copper metallurgical
test work has been completed. The recovery and copper equivalent formula for Meridian uses Boda deposit, NSW as a proxy, which is considered reasonable
given the similar dominant mineralisation of chalcopyrite as the observed copper mineral suggests comparable recovery. The gold assumption is consistent with
preliminary cyanide leach test work on Meridian samples CuEq (%) = Cu (%) + 0.98 × Au (g/t). It is the Company’s opinion that both metals have a reasonable
potential to be recovered and sold. 3E is the unweighted sum of gold, platinum and palladium grades (g/t) and is not a metal equivalent.
ASX Announcement
18 November 2026 ASX: LGM
Figure 1. Chalcopyrite-magnetite bearing drill core (3m at 0.84g/t Au, 0.91% Cu, 83ppm Mo from 36m-39m - EFO217D)
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Page 2 of 21
Legacy Minerals Holdings Limited (ASX: LGM, “Legacy Minerals” or “the Company”) is pleased to
report on exploration activities and diamond drilling assays received from its exploration alliance
partner, Earth AI, at the Fontenoy Project (the Project) (EL8995) in the Lachlan Fold Belt, NSW, near
Young. Legacy Minerals holds a 20% loan-carried interest in the Project through to commercial
production.
Management Comment Legacy Minerals CEO and Managing Director, Christopher Byrne, said:
“Fontenoy is now subject to a significant, multi-rig drilling campaign and the definition of a large copper
and gold intrusion-related mineral system. Importantly, Fontenoy is now a joint venture in which Legacy
Minerals’ 20% interest is carried by Earth AI through to commercial production, so our shareholders keep
their exposure to the project’s growth without the need to fund it.
Drilling has now shown that mineralisation is continuous over 3km of strike and extends from the surface
to at least 250m depth. Mapping, historic drilling and geophysics point to potential for the system to
extend over a total of 8km. At Meridian, Earth AI has intersected sulphide-hosted, copper and gold,
including 30m at 0.58% CuEq from 293m (Cu 0.40%, Au 0.18g/t) in EFO120D and 25.8m at 0.60% CuEq
from 193.2m in EFO59D. At Polaris, higher-grade platinum and palladium mineralisation was highlighted
by 9m at 1.65g/t 3E from 222m in EFO36D.
With three rigs spinning and a fourth to be added in early 2027, the program is moving quickly. Earth
AI’s aim is to build the drilling density needed for a maiden Mineral Resource Estimate, to complete
metallurgical test work and to start early mining studies within the next 6 months. A 3D IP geophysical
survey is to commence in early Q1 2027 to highlight potential high-grade zones within this large mineral
system.
Fontenoy gives Legacy Minerals shareholders further exposure to critical minerals and copper discovery
through a partner-funded structure, while the Company focuses its activities and expenditure at Mt
Carrington.”
Drilling Program Overview
The Fontenoy Project (EL8995) is located in the Lachlan Fold Belt, NSW, near Young, and is explored
under a farm-in and joint venture alliance with Earth AI, which funds and operates all exploration.
Legacy Minerals currently holds a 20% interest in the Project, with Earth AI having completed Phase 2
of the joint venture agreement.
In addition to the airborne VTEM electromagnetic survey reported in July 2025iii
, Earth AI completed
a major diamond drilling campaign designed to target mineralisation across the project area and to
step out from the earlier Polaris palladium discoveryiv
. This announcement reports assay results for 41
diamond holes for 24,522.5m across three prospect areas, summarised in Table 3.
Significant intervals are selected using lower cut-offs of 0.20% CuEq for copper-gold and 0.30g/t 3E
for PGE mineralisation, with up to 3m consecutive internal dilution and no minimum reported width.
Grades are length-weighted without upper cutting, and PGE and copper-gold candidates are jointly
selected without overlapping parent intervals. CuEq (%) = Cu (%) + 0.981943984 x Au (g/t), using
assumed prices of US$14,000/t copper and US$4,000/troy oz gold, and respective recovery
assumptions of 87% and 93%. These are reporting assumptions, not demonstrated metallurgical
recoveries. It is the Company’s opinion that both copper and gold have a reasonable potential to be
recovered and sold. 3E is the unweighted sum of platinum, palladium and gold (g/t), not a metal
equivalent. All widths are downhole lengths and true widths are not yet known.
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Page 3 of 21
Figure 2. Fontenoy Project drill collar plan showing all drill hole traces. Earth AI drill holes from this release
highlighted with white halo (GDA2020, MGA Zone 55).
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Page 4 of 21
Historic Drilling at Meridianii
Meridian was first drill tested by Pacminex Pty Ltd in 1969 and 1970, with 16 diamond holes to a
maximum depth of 515m, and later by Michelago Resources NL in 1997, with 28 shallow RC holes to
a maximum depth of 80m. The historic holes were drilled to mostly test the upper 100m of the system.
Historic Meridian drilling returned shallow copper-gold mineralisation, including:
24.4m at 0.59% Cu from 36.6m (1-2-1D).
22m at 0.34% Cu and 0.67g/t Au from 20m (WRC9).
59.5m at 0.28% Cu from 1.5m (1-2-3D).
22.9m at 0.38% Cu from 167m (1-2-9D).
69.3m at 0.22% Cu from 19.1m (1-2-4D).
16m at 0.41% Cu and 0.16g/t Au from 32m (WRC8).
Together, the historic and modern drilling identifies mineralisation from near surface to approximately
480m downhole over about 3km of strike. Earth AI drilling has intersected sulphide-hosted, copper-
gold mineralisation beneath and along strike from the shallow historic intercepts.
Earth AI’s proprietary AI technology suggests the Meridian system may have a total strike length of up
to 8km. This hypothesis is supported by a historic hole drilled 56 years ago (1970) about 4.5km south
of Meridian which returned:
14m at 0.37% Cu and 0.72g/t Au from 108m (1-2-15D).
Meridian Prospect (Copper-Gold)
Twenty-five holes for 13,625.6m were completed at Meridian. Significant copper-gold intervals
include:
39m at 0.47% CuEq (0.35% Cu, 0.12g/t Au) from 192m, including 25.8m at 0.60% CuEq (0.45% Cu,
0.16g/t Au) from 193.2m (EFO59D).
30m at 0.58% CuEq (0.40% Cu, 0.18g/t Au) from 293m, including 3m at 0.97% CuEq (0.70% Cu,
0.28g/t Au) from 296m (EFO120D).
24m at 0.61% CuEq (0.36% Cu, 0.26g/t Au) from 21m, including 12m at 1.00% CuEq (0.57% Cu,
0.44g/t Au) from 33m (EFO217D).
15m at 0.47% CuEq (0.35% Cu, 0.12g/t Au) from 302m, including 9m at 0.65% CuEq (0.49% Cu,
0.16g/t Au) from 308m (EFO60D).
16m at 0.46% CuEq (0.28% Cu, 0.18g/t Au) from 302m, including 8m at 0.62% CuEq (0.41% Cu,
0.21g/t Au) from 310m (EFO106D).
10.4m at 0.53% CuEq (0.30% Cu, 0.24g/t Au) from 206.2m (EFO143D).
18m at 0.29% CuEq (0.22% Cu, 0.07g/t Au) from 471m (EFO108D).
36m at 0.33% CuEq (0.18% Cu, 0.15g/t Au) from 106m, including 6m at 0.74% CuEq (0.33% Cu,
0.42g/t Au) from 136m, and 15m at 0.37% CuEq (0.20% Cu, 0.17g/t Au) from 186m (EFO162D).
9m at 0.62% CuEq (0.38% Cu, 0.24g/t Au) from 75m (EFO65D).
Gold-rich intervals include:
3m at 2.52g/t Au from 63m, and 12m at 0.82g/t Au from 72m (EFO159D).
2m at 0.58g/t Au from 238m, including 0.7m at 2.22g/t Au from 238.2m (EFO45D).
9m at 0.30g/t Au from 95m, including 1.4m at 1.92g/t Au from 96.2m (EFO65D).
1.7m at 1.23g/t Au from 369m (EFO59D).
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Page 5 of 21
5.6m at 0.45g/t Au from 89.4m (EFO169D).
Figure 3. Meridian Prospect long section looking west, with recent and historic drill holes (GDA2020, MGA
Zone 55).
Preliminary Gold Cyanide Leach Test work
Preliminary cyanide leach test work was conducted on selected gold-mineralised drill core samples
from the Meridian Prospect. Five samples returned calculated cyanide-soluble gold fractions ranging
from 90.2% to 94.5%, with a length-weighted average of 92.7% across 13m of sampled core (Table
4). These results indicate that a high proportion of the gold in the selected samples was amenable to
cyanide dissolution under laboratory test conditions. These results suggest it is unlikely that the gold
is significantly refractory or locked within the pyrite-chalcopyrite sulphide assemblage. Further min-
eralogical and metallurgical testing is planned to confirm gold deportment and recovery characteris-
tics across the broader deposit.
Polaris Prospect (Platinum-Palladium)
Fifteen holes for 10,311.9m were completed at Polaris. Eight holes returned significant 3E intervals
under the 0.30g/t 3E cut-off. Mineralisation is hosted in serpentinised dunitic to peridotitic cumulates
of the Fontenoy mafic-ultramafic complex. Broader lower-grade PGE mineralisation occurs from near
surface.
Significant 3E intervals include:
3m at 0.52g/t 3E (0.13g/t Pd, 0.39g/t Pt, <0.01g/t Au) from 190m, 3m at 0.31g/t 3E (0.21g/t Pd,
0.10g/t Pt, <0.01g/t Au) from 62m and 1.9m at 0.30g/t 3E (0.09g/t Pd, 0.21g/t Pt, <0.01g/t Au) from
178.1m (EFO34D).
5m at 0.45g/t 3E (0.31g/t Pd, 0.11g/t Pt, 0.03g/t Au) from 360m and 5m at 0.40g/t 3E (0.30g/t Pd,
0.10g/t Pt, 0.01g/t Au) from 115m (EFO21D).
8m at 0.37g/t 3E (0.28g/t Pd, 0.08g/t Pt, 0.01g/t Au) from 112m, 4m at 0.41g/t 3E (0.25g/t Pd,
0.15g/t Pt, <0.01g/t Au) from 188m and 4m at 0.35g/t 3E (0.26g/t Pd, 0.09g/t Pt, <0.01g/t Au) from
302m (EFO151D).
10m at 0.48g/t 3E (0.42g/t Pd, 0.06g/t Pt, <0.01g/t Au) from 390m, 5m at 0.47g/t 3E (0.39g/t Pd,
0.08g/t Pt, <0.01g/t Au) from 405m and 5m at 0.42g/t 3E (0.33g/t Pd, 0.07g/t Pt, 0.03g/t Au) from
335m (EFO8D).
9m at 1.65g/t 3E (1.31g/t Pd, 0.25g/t Pt, 0.08g/t Au) from 222m, 2m at 1.42g/t 3E (1.18g/t Pd,
0.20g/t Pt, 0.04g/t Au) from 458m and 2m at 0.46g/t 3E (0.28g/t Pd, 0.14g/t Pt, 0.04g/t Au) from
474m (EFO36D) .
Previously reported significant 3E intervals includev
:
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Page 6 of 21
120m at 0.30g/t 3E from 298m (no cut-off grade), including 10m at 1.2g/t 3E from 388m (EFO7D).
360m at 0.12g/t 3E from surface (no cut-off grade), including 14m at 0.35g/t 3E from 72m and 22m
at 0.29g/t 3E from 116m (EFO10D).
100m at 0.13g/t 3E from 64m (no cut-off grade), including 20m at 0.27g/t 3E from 128m (EFO9D).
Joint Venture Update: Legacy Minerals Carried to Production
The Company has received notice from Earth AI Pty Ltd (Earth AI) confirming that Earth AI has funded
A$3 million of exploration on EL8995 within 48 months of the Farm-In Agreement dated 15 October
2024, satisfying the requirement of the Follow-On (Phase 2) Farm-In Option.
On completion of Phase 2:
Earth AI will hold an 80% interest in EL8995 and Legacy Minerals will hold 20%.
Legacy Minerals’ 20% interest is carried through to production. Under the Farm-In Agreement,
Legacy Minerals’ share of joint venture funding is met by Earth AI and repaid only out of Legacy
Minerals’ share of the proceeds of production, so Legacy Minerals is not required to contribute
further exploration, study or development funding.
Earth AI continues as operator and will fund the current multi-rig drill-out, the planned maiden
Mineral Resource Estimate, metallurgical test work and future mining studies.
Since commencing at Fontenoy, Earth AI has completed 46 diamond holes for 27,352.4m and has
taken the Project from a greenfield, palladium discovery to a copper-gold and platinum group element
system over more than 3km of strike. The carried 20% interest gives Legacy Minerals’ shareholders
continued exposure to the Project through resource definition, studies and development, without
further dilution to fund that work.
Planned Mineral Resource Estimate and Studies
Earth AI has advised the Company that, following the current multi-rig drill-out, it plans to undertake
a maiden Mineral Resource estimate for the Fontenoy Project and to continue metallurgical test work
and commence early mining studies. This work is to be funded and operated by Earth AI under the
alliance at no cost to Legacy Minerals.
The drill-out is designed to provide the drill spacing and the geological, grade continuity, bulk density,
survey and QAQC data required to support estimation and classification under the JORC Code (2012).
Preliminary metallurgical screening has commenced, with additional test work planned to investigate
gold cyanide solubility, nickel sulphide mineralogy, copper recovery and potential processing
recoveries. The favourable initial Meridian gold leach response provides a basis for prioritising
representative variability testing, independent head-grade reconciliation and process-specific studies
to establish achievable gold recoveries.
Next Steps
A fully partner-funded, multi-rig drill-out campaign is underway at the Fontenoy Project, with three
rigs currently on site and a fourth planned for early 2027.
The highest-priority focus of the current drilling program is the NW–SE-trending structure coincident
with a prominent magnetic high at the Meridian Prospect. Copper-gold mineralisation has already
been identified across approximately 3km of strike at Meridian, with ongoing drilling aimed at defining
the geometry, extent and continuity of mineralisation along this priority structure to support a maiden
Mineral Resource Estimate (MRE), targeted for Q2 2027.
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Page 7 of 21
Existing drilling in the more closely spaced portions of Meridian is approaching the drill density
typically sought for initial resource estimation. The current program will prioritise targeted infill and
step-out drilling to close remaining gaps, establish continuity and extend the known mineralised
system along strike and at depth.
In parallel, Earth AI will continue testing untested VTEM and IP anomalies at Polaris for potential
higher-grade nickel-copper-PGE sulphide mineralisation. A planned 3D IP geophysical survey will
further refine drilling targets and assist in identifying potential higher-grade zones.
Further drilling remains subject to drill planning, landholder access, statutory approvals and partner
funding. The Company will update the market as results are received and this work progresses.
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Page 8 of 21
Approved by the CEO & Managing Director of Legacy Minerals Holdings Limited
For more information:
Investors:
Chris Byrne
CEO & Managing Director
chris.byrne@legacyminerals.com.au
+61 (0) 499 527 547
Media:
Nicholas Read
Read Corporate
nicholas@readcorporate.com.au
+61 (0) 419 929 046
DISCLAIMER AND PREVIOUSLY REPORTED INFORMATION
Information in this announcement is extracted from reports lodged as market announcements referred to
above and available on the Company’s website https://legacyminerals.com.au/ and on the Company’s
Investor Hub. The Company confirms that it is not aware of any new information that materially affects the
information included in original referenced market announcements and that all material assumptions and
technical parameters underpinning the results in those announcements continue to apply and have not
materially changed unless otherwise stated.
This announcement contains certain forward-looking statements, including statements regarding the
interpretation of the drilling and geochemical results and the nature, scope and timing of further
exploration, the planned Mineral Resource Estimate, metallurgical test work and mining studies at the
Fontenoy Project. Forward-looking statements are only predictions and are subject to risks, uncertainties
and assumptions which are outside of the control of Legacy Minerals Holdings Limited (LGM). These risks,
uncertainties and assumptions include commodity prices, currency fluctuations, economic and financial
market conditions, environmental risks and legislative, fiscal or regulatory developments, political risks,
project delay, approvals and cost estimates. Exploration at the Fontenoy Project is funded and operated
by a joint venture partner and the scope, timing and continuation of that exploration is not within the
Company’s control. The exploration results reported in this announcement are Exploration Results only,
they are not Mineral Resources, and there is no certainty that further exploration will define a Mineral
Resource. The electromagnetic conductor referred to in this announcement is an untested geophysical
response and there is no certainty that it reflects mineralisation. Actual values, results or events may be
materially different to those contained in this announcement. Given these uncertainties, readers are
cautioned not to place reliance on forward-looking statements. Any forward-looking statements in this
announcement reflect the views of LGM only at the date of this announcement. Subject to any continuing
obligations under applicable laws and ASX Listing Rules, LGM does not undertake any obligation to update
or revise any information or any of the forward-looking statements in this announcement to reflect
changes in events, conditions or circumstances on which any forward-looking statement is based.
COMPETENT PERSON’S STATEMENT
The information in this announcement that relates to Exploration Targets, Exploration Results, Mineral
Resources or Ore Reserves across the broader Legacy Minerals portfolio is based on information compiled
by Thomas Wall, a Competent Person who is a Member of the Australian Institute of Geoscientists. Mr Wall
is the Technical Director and a full-time employee of Legacy Minerals Pty Limited, the Company’s wholly-
owned subsidiary, and a shareholder of the Company. Mr Wall has sufficient experience that is relevant to
the style of mineralisation and type of deposit under consideration and to the activity being undertaken to
qualify as a Competent Person as defined in the 2012 edition of the Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves. Mr Wall consents to the inclusion of the matters
based on this information in the form and context in which it appears in this announcement.
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Page 9 of 21
About Legacy Minerals
Legacy Minerals is an ASX-listed public company exploring gold, silver, copper, and base-metal projects in NSW.
The Company’s projects present significant discovery opportunities for shareholders, with a focus on discovery
drilling and the development of the Mt Carrington Project.
Cu-Au Mt Carrington (EL6273, EL9616, EL9727, ALA75)
Large caldera (~150km2) with similar geological characteristics to other major Pacific Rim low-sulphidation deposits. The
current Mineral Resource of 1.6Moz AuEqvi
Au-Ag Bauloora
One of NSW’s largest low-sulphidation, epithermal
systems with a 15 km2 epithermal vein field.
Ni-Co Nico Young Cobalt Blue MoU
One of the largest nickel deposits in Australia with
significant counter-cyclical exposure.
Cu-Au Rockley
Prospective for porphyry Cu-Au, situated in the Macquarie
Arc Ordovician host rocks with historical high-grade
copper mines and undrilled targets.
Au-Cu (Pb-Zn) Cobar Aurelia Metals Earn-In
Undrilled targets next door to the Peak Gold Mines and
along strike of the CSA copper mine being actively
explored by Aurelia.
Au-Ag Black Range
Extensive low-sulphidation, epithermal system with
limited historical exploration. Epithermal occurrences
across 30 km of strike.
Au Harden Hill Tops Joint Venture
Substantial historical gold production from two high-grade
and underexplored, orogenic systems.
Cu-Au Thomson Red Hill Minerals Farm-in Option
Underexplored intrusion-related gold and copper search
space with numerous untested ‘bullseye’ targets, now to
be advanced under a partner-funded farm-in.
Au-Cu Fontenoy Earth AI Joint Venture
A highly prospective and underexplored area for PGE, Ni,
Au and Cu mineralisation with significant drill intercepts
and an aggressive exploration program.
Figure 4. Location summary of Legacy Minerals’ Projects in NSW, Australia, and major mines and deposits
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Page 10 of 21
Appendix 1 – Significant Intercepts, Meridian Prospect (Cu-Au)
Significant copper-gold and 3E intercepts at the Meridian Prospect. Lower cut-offs: 0.20% CuEq (Cu-Au)
and 0.30g/t 3E (PGE); up to 3m consecutive internal dilution; no minimum reported width. Downhole widths
are not true widths of mineralisation.
Hole ID
From
(m)
To
(m)
Width
(m)
CuEq
(%)
3E
(g/t)
Au
(g/t)
Cu
(%)
Pd
(g/t)
Pt
(g/t)
Ni
(%)
Ag
(g/t)
EFO59D 146.00 148.00 2.00 0.20 — 0.03 0.17 <0.01 <0.01 <0.01 0.54
EFO59D 174.00 178.00 4.00 0.21 — 0.06 0.15 <0.01 <0.01 <0.01 0.53
EFO59D 192.00 231.00 39.00 0.47 — 0.12 0.35 0.03 <0.01 <0.01 1.38
including† 193.20 219.00 25.80 0.60 — 0.16 0.45 0.05 <0.01 <0.01 1.75
EFO59D 236.00 242.00 6.00 0.30 — 0.08 0.22 0.01 <0.01 <0.01 0.91
including† 236.60 236.80 0.20 0.64 — 0.18 0.47 <0.01 <0.01 <0.01 2.02
including† 237.20 237.40 0.20 0.70 — 0.20 0.50 <0.01 <0.01 <0.01 2.46
EFO59D 280.00 284.00 4.00 0.26 — 0.03 0.23 <0.01 <0.01 <0.01 0.96
EFO59D 369.00 370.70 1.70 1.29 — 1.23 0.08 0.01 <0.01 <0.01 0.10
EFO59D 376.00 378.20 2.20 0.38 — 0.29 0.09 <0.01 <0.01 <0.01 0.61
EFO59D 468.00 470.00 2.00 0.29 — 0.07 0.22 0.05 0.02 0.03 0.92
EFO120D 260.00 263.00 3.00 0.23 — 0.11 0.12 0.02 <0.01 <0.01 0.52
EFO120D 293.00 323.00 30.00 0.58 — 0.18 0.40 0.03 <0.01 <0.01 1.29
including 296.00 299.00 3.00 0.97 — 0.28 0.70 0.04 <0.01 <0.01 2.05
EFO120D 338.00 344.00 6.00 0.34 — 0.07 0.27 0.01 <0.01 <0.01 0.88
EFO217D 21.00 45.00 24.00 0.61 — 0.26 0.36 0.01 0.01 <0.01 0.85
including 33.00 45.00 12.00 1.00 — 0.44 0.57 0.01 <0.01 <0.01 1.28
EFO217D 63.00 66.00 3.00 0.30 — 0.22 0.08 0.02 <0.01 <0.01 0.30
EFO217D 81.00 90.00 9.00 0.24 — 0.12 0.12 <0.01 <0.01 <0.01 0.33
EFO217D 99.00 102.00 3.00 0.30 — 0.19 0.12 0.01 <0.01 <0.01 0.33
EFO217D 129.00 132.00 3.00 0.20 — 0.18 0.03 <0.01 <0.01 <0.01 0.17
EFO162D 106.00 142.00 36.00 0.33 — 0.15 0.18 0.02 <0.01 <0.01 0.52
including† 107.40 108.70 1.30 0.58 — 0.27 0.31 0.03 <0.01 <0.01 1.01
including† 110.90 111.10 0.20 0.75 — 0.54 0.22 0.02 <0.01 <0.01 0.75
including† 112.10 112.30 0.20 0.72 — 0.27 0.45 0.02 <0.01 <0.01 1.44
including† 113.00 113.20 0.20 0.64 — 0.28 0.37 0.02 <0.01 <0.01 1.33
including† 115.00 115.20 0.20 0.66 — 0.29 0.37 0.02 <0.01 <0.01 1.02
including† 116.40 116.80 0.40 0.61 — 0.26 0.35 0.02 <0.01 <0.01 1.11
including† 117.80 119.00 1.20 0.59 — 0.34 0.26 0.03 <0.01 <0.01 0.74
including 136.00 142.00 6.00 0.74 — 0.42 0.33 0.03 <0.01 <0.01 0.97
EFO162D 159.00 162.00 3.00 0.25 — 0.06 0.19 0.02 <0.01 <0.01 0.40
EFO162D 186.00 201.00 15.00 0.37 — 0.17 0.20 0.01 0.01 0.01 0.65
including 190.50 192.00 1.50 0.69 — 0.32 0.38 <0.01 <0.01 0.01 0.89
including 195.00 198.00 3.00 0.71 — 0.34 0.38 0.01 0.01 0.01 1.01
including† 198.30 198.60 0.30 0.62 — 0.30 0.32 0.01 0.01 0.01 0.81
EFO162D 207.00 210.00 3.00 0.22 — 0.10 0.12 <0.01 <0.01 <0.01 0.33
EFO159D 63.00 66.00 3.00 2.47 — 2.52 0.02 <0.01 <0.01 <0.01 0.25
EFO159D 72.00 84.00 12.00 0.86 — 0.82 0.06 <0.01 <0.01 <0.01 0.86
including 81.00 84.00 3.00 1.32 — 1.24 0.11 <0.01 <0.01 <0.01 1.20
EFO60D 63.00 66.00 3.00 0.21 — 0.04 0.18 <0.01 <0.01 <0.01 0.85
EFO60D 132.00 138.00 6.00 0.70 — 0.31 0.40 <0.01 <0.01 <0.01 1.89
EFO60D 278.00 283.80 5.80 0.22 — 0.04 0.19 <0.01 <0.01 <0.01 0.61
EFO60D 287.00 293.00 6.00 0.46 — 0.11 0.35 0.01 <0.01 <0.01 0.86
EFO60D 302.00 317.00 15.00 0.47 — 0.12 0.35 0.06 <0.01 <0.01 1.20
including 308.00 317.00 9.00 0.65 — 0.16 0.49 0.09 <0.01 <0.01 1.68
EFO45D 116.00 148.00 32.00 0.29 — 0.05 0.24 <0.01 <0.01 <0.01 0.81
EFO45D 152.00 156.00 4.00 0.23 — 0.04 0.19 <0.01 <0.01 <0.01 0.67
EFO45D 180.00 180.30 0.30 0.25 — 0.07 0.19 <0.01 <0.01 <0.01 1.15
EFO45D 214.00 220.00 6.00 0.50 — 0.16 0.34 0.04 <0.01 <0.01 1.24
including 218.00 220.00 2.00 1.06 — 0.33 0.73 0.08 0.01 <0.01 2.47
EFO45D 238.00 240.00 2.00 0.59 — 0.58 0.03 0.01 <0.01 <0.01 0.30
including† 238.20 238.90 0.70 2.18 — 2.22 0.07 0.01 <0.01 <0.01 0.78
EFO45D 504.00 506.00 2.00 — — <0.01 0.20 0.02 0.01 0.12 0.34
EFO143D 91.00 94.00 3.00 0.26 — 0.27 0.01 0.01 <0.01 <0.01 0.33
EFO143D 191.00 206.00 15.00 0.30 — 0.11 0.19 0.02 <0.01 <0.01 0.74
EFO143D 206.20 216.60 10.40 0.53 — 0.24 0.30 0.03 <0.01 <0.01 0.97
including 206.20 215.00 8.80 0.58 — 0.27 0.31 0.04 <0.01 <0.01 1.00
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Page 11 of 21
Hole ID
From
(m)
To
(m)
Width
(m)
CuEq
(%)
3E
(g/t)
Au
(g/t)
Cu
(%)
Pd
(g/t)
Pt
(g/t)
Ni
(%)
Ag
(g/t)
EFO143D 246.00 249.00 3.00 0.26 — 0.17 0.09 0.01 <0.01 <0.01 0.30
EFO143D 288.00 291.10 3.10 — — 0.01 0.54 0.01 <0.01 0.13 3.02
EFO108D 471.00 489.00 18.00 0.29 — 0.07 0.22 0.02 <0.01 <0.01 0.86
including† 487.40 487.60 0.20 1.30 — 0.34 0.97 <0.01 <0.01 <0.01 5.44
EFO108D 495.00 504.00 9.00 0.34 — 0.08 0.25 0.01 <0.01 <0.01 0.81
including† 499.10 501.20 2.10 0.58 — 0.13 0.45 0.04 0.01 <0.01 1.38
EFO108D 510.00 519.00 9.00 0.28 — 0.03 0.25 <0.01 <0.01 <0.01 0.73
EFO106D 282.00 294.00 12.00 0.26 — 0.08 0.18 0.01 <0.01 <0.01 0.67
EFO106D 302.00 318.00 16.00 0.46 — 0.18 0.28 0.01 <0.01 <0.01 1.25
including 310.00 318.00 8.00 0.62 — 0.21 0.41 <0.01 <0.01 <0.01 1.93
EFO122D 255.00 270.00 15.00 0.31 — 0.10 0.21 0.05 <0.01 <0.01 0.75
EFO122D 330.00 339.00 9.00 0.22 — 0.10 0.12 0.02 <0.01 <0.01 0.40
EFO122D 348.00 351.00 3.00 0.24 — 0.06 0.18 0.02 <0.01 <0.01 0.49
EFO122D 357.00 360.00 3.00 0.33 — 0.09 0.24 0.01 <0.01 <0.01 0.75
EFO122D 366.00 369.00 3.00 0.27 — 0.06 0.22 0.01 0.01 <0.01 0.59
EFO122D 378.00 381.00 3.00 0.25 — 0.10 0.16 0.01 0.01 <0.01 0.42
EFO65D 75.00 84.00 9.00 0.62 — 0.24 0.38 0.01 <0.01 0.01 3.08
including† 75.60 83.10 7.50 0.61 — 0.24 0.37 0.01 0.01 0.01 2.80
EFO65D 95.00 104.00 9.00 0.35 — 0.30 0.06 0.01 0.01 <0.01 0.19
including† 96.20 97.60 1.40 1.99 — 1.92 0.10 0.02 0.01 0.01 0.37
including 101.30 104.00 2.70 0.66 — 0.55 0.12 0.01 0.01 0.01 0.40
EFO142D 126.00 138.00 12.00 0.34 — 0.05 0.29 <0.01 <0.01 0.02 0.56
EFO142D 216.00 222.00 6.00 0.23 — 0.02 0.21 0.02 <0.01 <0.01 1.64
EFO63D 398.00 401.00 3.00 — — 0.01 0.24 0.01 0.01 0.06 0.40
EFO63D 476.00 481.00 5.00 — — 0.01 0.31 <0.01 <0.01 0.13 0.20
EFO63D 549.00 553.00 4.00 — — 0.01 0.66 0.01 0.01 0.11 0.80
EFO155D 155.00 167.00 12.00 0.25 — 0.12 0.13 0.01 0.01 0.01 0.30
EFO155D 218.00 221.00 3.00 0.41 — 0.17 0.25 0.01 0.01 0.01 0.50
EFO168D 262.00 271.80 9.80 0.22 — 0.12 0.11 0.01 <0.01 <0.01 0.28
EFO168D 275.80 279.80 4.00 0.35 — 0.17 0.18 0.02 0.02 <0.01 0.46
EFO169D 89.40 95.00 5.60 0.53 — 0.45 0.09 <0.01 <0.01 <0.01 0.40
EFO169D 313.00 316.00 3.00 — 0.45 0.01 0.01 0.37 0.07 0.07 0.10
EFO218D 38.30 41.00 2.70 0.27 — 0.09 0.19 0.02 0.01 <0.01 0.52
EFO218D 49.30 54.00 4.70 0.27 — 0.09 0.18 0.01 0.01 <0.01 0.46
EFO218D 92.00 95.00 3.00 0.31 — 0.15 0.17 0.01 <0.01 <0.01 0.61
EFO145D 94.50 106.30 11.80 — 0.46 0.01 <0.01 0.32 0.13 0.21 0.11
EFO145D 286.90 291.00 4.10 — 0.42 0.01 <0.01 0.28 0.13 0.22 0.10
EFO46D 3.00 6.00 3.00 — 0.47 0.01 <0.01 0.31 0.15 0.61 0.10
EFO46D 207.00 210.00 3.00 — 0.32 0.02 0.03 0.24 0.06 0.05 0.10
EFO46D 319.00 322.50 3.50 — 0.35 0.02 <0.01 0.26 0.07 0.11 0.08
EFO62D 625.00 628.00 3.00 — — 0.01 0.33 <0.01 0.01 0.16 0.26
EFO119D 45.00 48.00 3.00 0.28 — 0.28 0.01 <0.01 <0.01 <0.01 0.20
EFO141D 517.00 521.00 4.00 — 0.38 0.01 0.03 0.19 0.18 0.20 0.40
3E is the unweighted sum of Au, Pt and Pd. CuEq is calculated from Cu and Au only. All native grades are length-weighted averages; no
upper grade cut has been applied. “including” subintervals are contained within, and are not additional to, their parent intervals. † Indicates
supplementary shorter-interval assays; original broad-interval grades are unchanged. Cu-only intercepts have no r
Share your feedback
Discover