Artificial Intelligence makes Magmatic PGE-Ni-Cu Discovery
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
26 February 2024
Artificial Intelligence makes New Magmatic PGE-Ni-Cu Discovery
Gramont Discovery, Fontenoy Project (LGM 100%), Lachlan Fold Belt, NSW
Strategic Partner Earth AI drills discovery hole
•
•
•
Discovery drillhole, diamond cored EFO7D, returned magmatic-related platinum group elements
(PGEs) and Ni-Cu-Fe sulphides including and broad zone of mineralisation:
o 34m at 0.5g/t 3E PGE*
including a higher grade zone of:
o 10m at 1.2g/t 3E PGE, 0.2% Ni and 891ppm Cu from 388m down-hole.
The PGE component includes 10m at 0.89g/t palladium, 0.19g/t platinum, and 0.1g/t gold.
Mineralisation is associated with disseminated sulphides pentlandite, chalcopyrite and pyrrhotite.
Unlocked potential for magmatic-related PGE-Ni-Cu at Fontenoy
•
•
This is the first known discovery of this mineralisation style in the Lachlan Fold Belt, NSW.
Magmatic-related PGE-Ni-Cu sulphide deposits can be very large and valuable deposit styles such
Nova-Bollinger i and Julimar ii.
PGE’s and Nickel listed as Critical and Strategic Minerals
•
•
Platinum-group elements and nickel are recognised by the Australian Government as essential to
our modern technologies, economies and national security iii.
Their value, rarity and strategic importance underpins the significance of this new discovery.
Artificial Intelligence Led Discovery
•
Earth AI has been implementing its artificial intelligence deposit targeting system at Fontenoy and
has generated a range of drill targets across the tenement, with this being the first drill test iv,1.
Next Steps
•
Further drilling is planned at the Gramont Discovery and across the broader Fontenoy Project.
Figure 1. Drill hole EFO7D (10m at 1.2g/t 3E PGE from 388m) showing disseminated interstitial Ni-Cu-Fe
sulphides (yellow) in diamond drill core at 397.8m (left) and photomicrograph (field of view 1mm across) of the
mineralisation (composed of bronze pentlandite, yellow chalcopyrite and brown pyrrhotite).
1
See ‘Endnotes’ on Page 17 for references. *No cut-off grade applied
Page 1 of 18 | ABN 43 650 398 897
3/202 Russell Street Bathurst, 2795
www.legacyminerals.com.au
ASX: LGM
Page 2 of 18
Legacy Minerals Holdings Limited (ASX: LGM, “LGM”, “the Company” or “Legacy Minerals”) is pleased
to announce the receipt of diamond drilling assays by its exploration alliance partner, Earth AI at the
Company’s 100% owned Fontenoy Project, NSW.
Management comment Legacy Minerals CEO & Managing Director, Christopher Byrne said:
“To kick-off 2024 with a new Magmatic PGE-Ni-Cu discovery, Gramont, at our 100% owned Fontenoy
Project is a fantastic result.
“The key driver of this discovery is the implementation of artificial intelligence through our alliance
partner Earth AI. In their search for magmatic-related nickel-copper sulphides and PGE’s, this is
genuine frontier exploration in an area previously known for its scandium-nickel-cobalt laterite
deposits.
“What is also impressive is that this is the first confirmed discovery of magmatic-related nickel-copper
sulphide mineralisation in the 700km long ultramafic belt that hosts the Fontenoy Project.
“Magmatic nickel-copper styles of mineralisation are targeted globally due to their potential to contain
a suite of elements of significant value. The inclusion of platinum group elements and nickel in the
Australian and global critical minerals list further underpins the significance of this discovery for
shareholders.
“While the Earth AI team is at an early stage in the discovery, the grades, width and extensive
prospective strike length mean this discovery is wide open for further exciting news to come.”
Figure 2: Drilling at Discovery Hole EF07D, December 2024
Diamond Drilling
Earth AI completed three diamond-cored holes for a total 1,633.7 metres. These were drilled at the
Fontenoy Project testing the interpretation of a mafic intrusive complex with the potential to host
magmatic related Ni-Cu sulphide and PGE related mineralisation. While NSW is known to host major
laterite deposits hosting Ni-Co and Sc, magmatic-related nickel-copper-PGE sulphide systems in this
region have never before been recognised. These styles of deposit are rare and greatly prized for their
potentially higher grades, potential suite of valuable metals and lower extraction costs.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 3 of 18
The Fontenoy Project has historically been drilled with companies targeting the potential for shallow
nickel-laterite deposits. Historical workers had not tested for the potential for PGE’s or magmaticrelated nickel-copper sulphide mineralisation.
Earth AI had been implementing its artificial intelligence deposit targeting system at Fontenoy and
have generated a range of drill targets across the tenement. Through ground truthing, the potential
for magmatic-related nickel-copper-PGE mineralisation was identified. Earth AI’s drilling was focused
on testing this hypothesis at the Project. The identification and confirmation in drilling of this style of
mineralisation is the first known in the district and it is believed that this is a discovery of a new style
of mineralisation in the Lachlan Fold Belt of NSW.
Figure 3. Drill hole cross section (6,187,700mN) of the discovery hole EFO7D 2 showing historical holes (*No
cut-off grade applied).
Drill holes were not surveyed and the exact trajectory of the hole trace may have deviated from collared dip
and azimuth. Refer to the JORC Table in Appendix 3 for further details.
2
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 4 of 18
In first pass testing of targets, Earth AI do not survey drill holes nor do they orientate drill core. This is
in keeping with their low cost and fast paced drilling business model. Upon a decision to follow up
targets or to test hypotheses further a decision may be made to use these tools. As such drill hole
traces may potentially have a large degree of error when representing the hole traces in Figures 3 and
Figures 4 as they do not account for changing dip or azimuth throughout the drill trace. Furthermore,
sampling is conducted in a limited fashion. Two metre sampling was completed on areas where visual
disseminated sulphides were logged. A total of 283.8 metres were sent for analysis and as such,
approximately 17% of the total drill hole metres have been assayed.
The initial samples from EFO7D have been re-submitted to the laboratory for nickel sulphide collection
fire assay (to test for rhodium, osmium, rutherium, iridium, palladium, platinum and gold). Further
prospectivity may be considered in the area if the samples are found to contain rhodium or other PGE
metals. Assessment as to whether further sections of the drill holes should be sent for assay is
underway.
Petrographic analysis of the mineralised interval has confirmed that mineralisation is a magmaticrelated Ni-Cu sulphide style with pentlandite, chalcopyrite and pyrrhotite present as interstitial
minerals within a coarse grained dunite intrusion or sill (Figure 1). Original interstitial sulphides might
have been deposited as FeNiCuS monosulphide solid solution, but subsequently exsolved, forming
variable proportions of chalcopyrite, pyrrhotite and pentlandite with a little associated magnetite.
EFO1D tested an outcropping dunite unit that was coincident with anomalous nickel with potential to
host magmatic sulphide mineralisation. It also tested the contact of ultramafics and granites for
Avebury-style mineralisation. The dunite unit was found to be un-mineralised in Ni-Cu bearing
sulphides. A slightly enriched interval of 4.6m at 0.14g/t 3E PGE was intercepted from 495.4m.
Penetratively deformed granite was intercepted from 515m to end of hole at 590.2m.
EFO3D tested the hypothesis of the existence a mafic sill, with magmatic sulphides accumulating at
the bottom of the sill. No sill was intercepted, and the drill hole terminated in a mafic ultramafic
complex at 600m.
EFO7D tested interpreted dolerite dykes or sills for sulphide bearing mineralisation. Rock chip
sampling at surface returned assays of up to 1,875ppm Cu, 4,480ppm Ni and 32ppb Pd and soil
samples up to 23ppb Au, 80ppm Cu and 4,840ppm Ni. Drilling intersected PGE-bearing Ni-Cu-Fe
sulphide mineralisation in dunite from a depth of 386m.
Table 1. Highlight drilling assay intervals from the Fontenoy Project.
Interval
Hole ID
From (m)
To (m)
Width (m)
Ni (ppm)
Cu (ppm)
Co
(ppm)
Pd (g/t)
Pt (g/t)
Au (g/t)
3E PGE
(g/t)
EFO1D
495.4
500
4.6
1217
31
101
0.11
0.03
0.001
0.14
EFO3D
464
512
48
1793
4
127
0.04
0.03
0.001
0.06
EFO7D
386
418
34*
1838
365
127
0.34
0.09
0.04
0.46
Incl.
386
406
20
1876
488
126
0.5
0.12
0.05
0.67
Incl.
388
398
10
2118
891
132
0.89
0.19
0.1
1.18
And.
410
418
8
1825
115
129
0.16
0.07
0.001
0.23
(*no cut-off grade applied)
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 5 of 18
Figure 4. Plan view of diamond drilling completed by Earth-AI and historic drilling.
Next Steps
The strong Ni-Cu-PGE surface anomalism encountered south of the discovery intercept is now a
priority area for follow up. The confirmation of PGE association with disseminated sulphides is
particularly encouraging as there is now the opportunity to follow up with electrical geophysics for
future drill targeting.
Furthermore, surface geochemical surveys targeting PGE-related mineralisation may further define
drill targets for testing. Diamond drill planning is underway to follow up these results.
These sulphides may be hosted in mafic and accumulate ultramafic intrusive bodies, both dykes and
sills. Gravity may also allow for further definition of these prospective host rocks for magmatic nickelcopper-PGE mineralisation.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 6 of 18
Nickel and PGE’s in New South Wales
There are numerous nickel occurrences located in three main NSW ultramafic belts v. These
occurrences are predominantly in the form of residual nickel-cobalt laterites, less commonly
hydrothermally-enriched nickel sulphide deposits, and rare magmatic nickel sulphide deposits in
layered mafic and ultramafic bodies.
Figure 5: Significant projects and nickel occurrences within the major ultra-mafic and mafic belts of NSW vi,vii,viii
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 7 of 18
About Fontenoy
The Fontenoy Project contains a number of prospective units within the Project area which include
the Yandilla Volcanics, Warrenoy Diorite and ultramafic rocks of the Wambidgee Serpentinite for
copper-nickel and cobalt. Stratabound manganese mineralisation occurs in the Cambro-Ordovician
Jindalee Group, while the Wambidgee Serpentinite contains a number of chromite deposits, and this
differentiated ultramafic sequence is prospective for both chromite and platinum group element
(PGE) mineralisation. Disseminated and veined copper-gold mineralisation hosted within the Yandilla
Volcanics has a strike length of approximately 8km. Mineralisation here is interpreted to represent
McPhillamys-style volcanogenic hosted massive sulphide (VHMS) mineralisation, however the
potential for intrusion related copper-gold mineralisation is being investigated.
A total of 16 diamond core holes for 4,014 metres and an additional 28 Reverse Circulation percussion
(RC) drill holes for 1,667m were historically completed ix. Drilling has confirmed that soil anomalism is
associated with broad gold-copper mineralisation intersected along the entire 8km strike and provides
encouragement for a number of drill ready target zones.
Historical drill intercepts at the Project includeix:
1-2-10D:
79m at 0.27% Cu
from 1.5m
WRC9:
22m at 0.67g/t Au and 0.34% Cu
from 20m
WRC21:
24m at 0.17g/t Au and 0.24% Cu
from surface
WRC3:
26m at 0.44g/t Au and 0.11% Cu
from surface
1-2-15D:
14m at 0.72g/t Au and 0.37% Cu
from 108m
Earth AI Exploration Alliance
Legacy Minerals signed an Exploration Alliance Agreement (Agreement) with Earth AI covering its
Fontenoy (EL8995) tenement (Strategic Alliance) x. The Strategic Alliance allows for a co-funding
model, whereby Earth AI will contribute up to $4.5M AUD of total exploration costs across the
tenement over a two-year period, with an option to extend for a further year. Subject to a qualifying
drilling intersection (as defined within the Agreement) being subsequently identified, Earth AI Pty Ltd
is entitled to a net smelter return royalty (Royalty) up to 3% in connection with an area surrounding
the discovery (Area of Interest). Legacy Minerals will retain 100% ownership over the tenement
covered under the Agreement.
Legacy Minerals is under no obligation to explore, develop or mine the tenement during the period of
the Strategic Alliance. However, whereafter the second anniversary of the Royalty Trigger Date, if no
mineral resource has been defined and the combined annual exploration development and mining
expenditure in the Area of Interest falls below $250,000 USD, Earth AI will have the option to assume
operational control and buy the Royalty Tenement that overlaps with the single Area of Interest under
the Minerals Royalty Deed, for a cash purchase price equal to $1,000,000 USD plus a 2% net smelter
royalty granted to the Legacy Minerals.
Earth AI Exploration Strategy
Earth AI is a vertically integrated metals exploration company based in San Francisco, USA. It’s NSW
based operations are located at Young, 15km from Legacy Minerals’ Fontenoy tenement. Earth AI
plans to implement its artificial intelligence deposit targeting system to generate drill targets across
the tenement. Once identified, Earth AI will follow up with on ground geophysical and geochemical
work before drill testing.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 8 of 18
Approved by the Board of Legacy Minerals Holdings Limited.
For more information:
Investors:
Media:
Chris Byrne
Nicholas Read / Kate Bell
CEO & Managing Director
Read Corporate
chris.byrne@legacyminerals.com.au
info@readcorporate.com.au
+61 (0) 499 527 547
+ 61 (0) 419 929 046
DISCLAIMER AND PREVIOUSLY REPORTED INFORMATION
Information in this announcement is extracted from reports lodged as market announcements referred to above
and available on the Company’s website https://legacyminerals.com.au/. The Company confirms that it is not
aware of any new information that materially affects the information included in the original market
announcement and that all material assumptions and technical parameters underpinning the estimates in the
relevant market announcement continue to apply and have not materially changed.
This announcement contains certain forward-looking statements. Forward looking statements are only
predictions and are subject to risks, uncertainties and assumptions which are outside of the control of Legacy
Minerals Holdings Limited (LGM). These risks, uncertainties and assumptions include commodity prices,
currency fluctuations, economic and financial market conditions, environmental risks and legislative, fiscal or
regulatory developments, political risks, project delay, approvals and cost estimates. Actual values, results or
events may be materially different to those contained in this announcement. Given these uncertainties, readers
are cautioned not to place reliance on forward-looking statements. Any forward-looking statements in this
announcement reflect the views of LGM only at the date of this announcement. Subject to any continuing
obligations under applicable laws and ASX Listing Rules, LGM does not undertake any obligation to update or
revise any information or any of the forward-looking statements in this announcement to reflect changes in
events, conditions or circumstances on which any forward-looking statements is based.
COMPETENT PERSON’S STATEMENT
The information in this Report that relates to Exploration Targets, Exploration Results, Mineral Resources or Ore
Reserves is based on information compiled by Thomas Wall, a Competent Person who is a Member of the
Australian Institute of Geoscientists. Mr Wall is the Technical Director and a full-time employee of Legacy
Minerals Pty Limited, the Company’s wholly-owned subsidiary, and a shareholder of the Company. Mr Wall has
sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and
to the activity being undertaken to qualify as a Competent Person as defined in the 2012 edition of the
Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Wall consents
to the inclusion of the matters based on his information in the form and context in which it appears in this
announcement.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 9 of 18
About Legacy Minerals
Legacy Minerals is an ASX listed public company that has been involved in the acquisition and
exploration of gold, copper, and base-metal projects in the Lachlan Fold Belt since 2017. The Company
has eight projects that present significant discovery opportunities for shareholders.
Au-Ag Black Range (EL9466, EL9589)
Cu-Au Drake (EL6273, EL9616)
Extensive low-sulphidation, epithermal system with
limited historical exploration. Epithermal
occurrences across 30km of strike.
Large caldera (~150km2) with similar geological
characteristics to other major pacific rim lowsulphidation deposits.
Cu-Au Rockley (EL8296)
Au-Cu (Pb-Zn) Cobar (EL9511)
Prospective for porphyry Cu-Au and situated in the
Macquarie Arc Ordovician host rocks with historic
high-grade copper mines that graded up to 23% Cu.
Undrilled targets next door to the Peak Gold Mines.
Several priority geophysical anomalies and gold in
lag up to 1.55g/t Au.
Au-Ag Bauloora (EL8994, EL9464) Newmont JV
Au Harden (EL9257, ELA6694)
One of NSW’s largest low-sulphidation, epithermal
systems with a 27km2 epithermal vein field.
Large historical high-grade quartz-vein gold
mineralisation. Drilling includes 3.6m at 21.7g/t Au
116m and 2m at 17.17g/t Au from 111m.
Cu-Au Glenlogan (EL9614) S2 Resources JV
Au-Cu Fontenoy (EL8995) Earth AI Alliance
Large, undrilled magnetic anomaly underneath
Silurian cover located 55kms from Cadia Valley.
An 8km long zone of Au and Cu anomalism defined
in soil sampling and drilling. Significant drill
intercepts include 79m at 0.27% Cu from 1.5m.
Figure 6: Regional setting of Legacy Minerals Projects xi,xii,xiii,xiv,xv,xvi
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 10 of 18
Appendix 1 – Drill Collar Information
Table 2: Drill hole collar information
Hole ID
Latitude
Longitude
EOH (m)
Dip
Azimuth (True North)
EFO1D
-34.4358
148.1313
590.2
-60
258
EFO3D
-34.4358
148.1313
600
-60
98
EFO7D
-34.447
148.132
443.5
-75
258
Appendix 2 – Drill Hole Assays
Table 3. Significant intervals
Interval
From (m)
To (m)
Width (m)
Ni (ppm)
Cu (ppm)
Co
(ppm)
Pd (g/t)
Pt (g/t)
Au (g/t)
3E
PGE
(g/t)
EFO1D
495.4
500
4.6
1217
31
101
0.11
0.03
0.001
0.14
EFO3D
464
512
48
1793
4
127
0.04
0.03
0.001
0.06
365
127
0.34
0.09
0.04
0.46
0.5
0.12
0.05
0.67
Hole ID
EFO7D
386
418
34*
1838
Incl.
386
406
20
1876
488
126
Incl.
388
398
10
2118
891
132
0.89
0.19
0.1
1.18
And.
410
418
8
1825
115
129
0.16
0.07
0.001
0.23
Significant intervals defined using >=0.1g/t Au, or >=10g/t Ag, or >=0.1g/t Pt, or >=0.1g/t Pd, or >=0.1g/t Au+Pd+Pt, or >=0.15% Ni, >=1m
downhole width, and <=1m internal waste. All intercepts are down hole widths only, true widths are not calculated. Collar location and
orientation information coordinates are WGS84, AHD RL. See Appendix 2 and 3 for additional details. *no cut-off grade applied.
Appendix 3 – JORC Code, 2012 Edition Table 1
Section 1 Sampling Techniques and Data
Criteria
JORC Code Explanation
Commentary
Diamond drilling was used to obtain HQ
(diameter: 63.5) and NQ sized (diameter:
47.5mm) drill core for geochemical sampling.
Interval spacing was 2 m determined by
visible sulphide mineralization.
Sampling
Techniques
Nature and quality of sampling (e.g., cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc).
These examples should not be taken as limiting the
broad meaning of sampling.
Diamond drill core provide a high-quality
sample that is logged for lithological
attributes.
0.6m - 2m sample intervals were collected
from the core trays.
DD core samples have been half cut with an
automatic core saw.
Samples were submitted to ALS
Geochemistry Pooraka SA for laboratory
analysis. Sample preparation used industry
standard methods of drying, jaw crushing
and pulverizing to -75 microns (85% passing)
(ALS code PUL-21 and PUL-22). Samples
were analysed by ALS methods PGM-ICP23
and ME-MS61R.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 11 of 18
No other measurement tools have been
used in the holes. The hole was not
surveyed. The core was unoriented.
Include reference to measures taken to ensure
sample representivity and the appropriate calibration
of any measurement tools or systems used.
Sampling was undertaken using sampling
protocols and QAQC procedures in line with
industry best practice. Due to the early-stage
nature of exploration, no field duplicates or
certified reference standards were
submitted. Core photographs were taken
wet prior to cutting and wet after cutting.
The drill core was unoriented.
Aspects of the determination of mineralisation that
are Material to the Public Report. In cases where
‘industry standard’ work has been done this would be
relatively simple (e.g. ‘reverse circulation drilling was
used to obtain 1m samples from which 3 kg was
pulverised to produce a 30 g charge for fire assay’).
In other cases more explanation may be required,
such as where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (e.g., submarine nodules) may
warrant disclosure of detailed information.
Drilling
techniques
Drill sample
recovery
Logging
Drill type (e.g., core, reverse circulation, open‐hole
hammer, rotary air blast, auger, Bangka, sonic, etc)
and details (e.g. core diametre, triple or standard
tube, depth of diamond tails, face sampling bit or
other type, whether core is oriented and if so, by
what method, etc).
The drill core was cut by Earth AI staff.
Diamond drilling was used to obtain drill
core for geochemical sampling. After cutting,
half core sampled in 0.6m-2m intervals were
sent for analysis. Only intervals down hole
that contained visible sulphide
mineralization were sent for assay.
Samples were submitted to ALS
Geochemistry Pooraka SA for laboratory
analysis. Sample preparation used industry
standard methods of drying, jaw crushing
and pulverizing to -75 microns (85% passing)
(ALS code PUL-21 and PUL-22). Samples
were analysed by ALS methods PGM-ICP23
and ME-MS61R.
Assay standards, blanks and duplicates were
analysed as part of the standard laboratory
analytical procedures.
Diamond drill techniques were used to
obtain HQ sized core (diameter: 63.5mm) on
average for the initial 100 m and NQ sized
core (diameter: 47.5mm) for the remainder
of the hole.
Method of recording and assessing core and chip
sample recoveries and results assessed.
Drill recovery was conducted by measuring
core lengths and comparing to rod string
lengths during drilling. Core block were used
to mark measured rod intervals. Meter
marks were measured against core blocks
and sampling intervals were taken according
to the meter marks.
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Various diamond drilling additives (including
muds and foams) have been used to
condition the drill holes to maximise
recoveries and sample quality. Drill core
samples cleaned at the drill site to remove
drilling fluids and cuttings to present clean
core for logging and sampling.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
There is no significant loss of material
reported in the mineralised parts of the
diamond core that is considered to bias
samples.
Whether core and chip samples have been
geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
All drill holes undertaken by have been
logged in full, from a visual basis, recording
lithology, texture, alteration and
mineralisation.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 12 of 18
Systematic geological logging was
undertaken. Data collection where
appropriate includes:
• Nature and extent of lithologies.
• Relationship between lithologies.
• Texture, alteration and mineralisation
• Amount and mode of occurrence of
minerals.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
Logging is both qualitative and quantitative
capturing downhole depth, lithology and
features of the sample.
The drillhole core are photographed within
the tray, wet and tray by tray.
All drill holes were logged in full.
Portions of diamond drilling completed has
been cut using conventional automatic core
saw in ½ for NQ and HQ core.
If core, whether cut or sawn and whether quarter,
half or all core taken.
The diamond core has been consistently
sampled ½ for NQ and HQ core with
remaining ½ retained/stored in core trays.
A sample size of 0.6m to 2m intervals,
weighing between 3 and 5 kg were collected.
This size is considered appropriate, and
representative of the material being
sampled given the width and continuity of
the intersections.
If non‐core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
Sub‐sampling
techniques and
sample
preparation
Not applicable as results are for core drilling.
Drill core is cut in half along the length and
the total half core submitted as the sample.
This procedure meets industry standards
where 50% of the total sample taken from
the diamond core is submitted.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Samples are dried, crushed and pulverized to
produce a homogenous representative subsample for analysis.
Samples undergo a dry crush of 90% passing
2mm with additional pulverising to a grind
quality of 85% passing 75μm (ALS code PUL21 and PUL-22).
Sample preparation is of industry standard.
Core sample intervals are based on a
nominal, 0.6m to 2m spacing.
Quality control procedures adopted for all
subsampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second‐half sampling.
All samples are dried and pulverised before
analysis. Pulverisers are washed and fineness
checks are routine, to ensure grind size as
per the QAQC undertaken by the external
laboratory.
To ensure adequate preparation at the
pulverisation stage samples are split to
weigh less than 3kg.
The remaining half-core is stored and allows
assay values to be viewed against the
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 13 of 18
geology; and, where required, further
samples may be submitted for quality
assurance. Quarter core resampling may be
completed in zones where appropriate.
Whether sample sizes are appropriate to the grain
size of the material being sampled.
The sample size is considered appropriate
for the mineralisation style and analytical
techniques used.
Samples undergo a spectral scan using the
TerraSpec® 4 HR spectrometer.
Samples are analysed for a Multi-Element
Suite (48 element) Analysis by ICP-MS (MEICP61) following a four-acid digest.
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or total.
Quality of
assay data and
laboratory
tests
For geophysical tools, spectrometres, handheld XRF
instruments, etc, the parametres used in determining
the analysis including instrument make and model,
reading times, calibrations factors applied and their
derivation, etc.
Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy
(i.e. lack of bias) and precision have been established.
Verification of
sampling and
assaying
Location of
data points
The Pt, Pd, Au analysis was carried out via
standard lead fire assay with ICP-AES finish.
Fire Assay is an industry-standard for Pt, Pd,
Au and it is considered appropriate as a firstpass analysis.
Certified Reference Materials/standards,
blanks and duplicates are inserted to assess
the assaying accuracy of the external
laboratory for QAQC protocol.
Techniques used for the early-stage nature
of the Project are considered total.
No geophysical tools were used to
determine any reported element
concentrations.
No pXRF results are reported for drill hole
samples.
Laboratory internal procedures to ensure
grind size of 85% passing -75μm was being
attained.
Laboratory QAQC for assay analysis involved
the use of internal lab standards using
standards, blanks, and duplicates.
The verification of significant intersections by either
independent or alternative company personnel.
All samples are analysed by an independent
laboratory and verified by Earth AI staff and
review by Legacy Minerals personnel.
The use of twinned holes.
No twinned holes have been completed in
this drill program.
Documentation of primary data, data entry
procedures, data verifi
Share your feedback
Discover