Drilling Underway of Large Gold-Copper Targets at Thomson
Released
Released
Announcement PDF
ASX Announcement
19 March 2025
ASX: LGM
Drilling of Large Gold-Copper Targets Underway at Thomson
Two 600m deep holes underway to test large coincident magnetic and gravity anomalies
interpreted as potential Intrusion Related Gold and Copper systems.
High-impact Drill Targets
•
The F4 and Cut-B anomalies within the Thomson Project, located in far north-west NSW, are defined
by discrete, coincident zones of elevated magnetic and gravity data.
•
They are two of over a dozen untested, large, discrete geophysical targets within the exploration
licences that may potentially represent Intrusion Related Gold-Copper (IRG-Cu) mineralisation.
•
The Thomson district and targets share similar characteristics to other major Intrusion Related GoldCopper (IRG-Cu) districts, such as the Paterson Province in WA, where recent major IRG-Cu discoveries
have been made at Winu (2.8Mt Cu, 8Moz Au, 51Moz Ag)1, i and Havieron (7Moz Au, 0.3Mt Cu) ii.
Discovery Opportunity
•
Legacy Minerals is a first mover in this very under-explored and fertile geodynamic setting with a beltscale exploration opportunity encompassing 5,500km2.
•
These anomalies are interpreted to occur on major lithological boundaries or faults observed in the
recently completed ambient noise tomography (ANT) magnetic and gravity surveys.
•
The anomalies have been concealed beneath younger sedimentary cover rocks interpreted to be
<100m and are hosted within the Cambrian-Ordovician basement rocks of the Thomson Orogen.
Drilling Assays Pending
•
Over 1,000m of previously unsampled drill core has been sent for assays expected to be returned late
March - early April including zones of observed mineralisation and alterationiii.
Drilling Underway
•
Two 600m deep drill-holes for a total of 1,200m are planned to use a combination of mud-rotary and
diamond drilling techniques.
•
Drilling is anticipated to take up to six weeks to complete.
F4 Anomaly
Cut-B Anomaly
Figure 1. Oblique views of the F4 anomaly (Left image: 6613500mN, MGA94 z54) and Cut-B anomaly (Right
image: 249750mE, MGA94 z55). 3D magnetic inversion model anomaly shells (Red >0.006 SI) and gravity
anomaly modelled density shells (green >2.72) with surface showing magnetic RTP.
1: For cross-referencing, refer to End Notes on page 17.
Page 1 of 17 | ABN 43 650 398 897
3/202 Russell Street Bathurst, 2795
www.legacyminerals.com.au
ASX: LGM
Page 2 of 17
Legacy Minerals Holdings Limited (ASX: LGM, Legacy Minerals or the Company) is pleased to advise that
drilling of two major copper-gold targets has commenced at its Thomson Project (EL9190, EL9194 and
EL9728) in NSW, Australia.
Management comment – Legacy Minerals CEO & Managing Director Christopher Byrne said:
“Following on Legacy Minerals’ upgraded gold and silver resource at Drake announced last week, we
are pleased to be drilling some major, untested, geophysical targets at our Thomson Project targeting
large gold and copper systems. With Government approvals in place to commence drilling at Thomson,
we have wasted no time in getting the rig out to the site to start drilling.
We have also received new 3D modelled inversions from the recently completed gravity and ambient
noise tomography (ANT) surveys at the Project. These have supported the exceptional targets and their
potential as large IRG-Cu systems. The Legacy Minerals team is very encouraged by the coincident
gravity and magnetic anomalies that have now been defined across a number of these anomalies.
Furthermore, these targets sit on large-scale ANT velocity changes that may represent major
lithological contacts, faults which, in some cases, support the interpretation of large intrusions at
depth.
The ANT and magnetic models have indicated that basement in these locations is within 100m of the
surface, well within the economic depths of a major discovery. The Thomson Project is a rare
opportunity to explore a new intrusion-related gold and copper mineral system and is poised for a
major discovery in the region and we look forward to keeping our shareholders updated with our
progress. ”
F4 Anomaly
The F4 anomaly is an undrilled, coincident linear magnetic and gravity anomaly striking WNW over a
strike extent of about 3km and is approximately 300m wide. Geophysical modelling indicates that the
anomaly is a steeply to near-vertical SSW dipping body that sits on an interpreted velocity change
boundary that also trends in an WNW orientation.
Figure 2. Plan view of the F4 magnetic anomaly shells (Red >0.006 SI) and gravity anomaly modelled density
shells (green >2.72) over aerial image.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 3 of 17
The F4 anomaly’s unusual geometry compared to other known felsic-intermediate intrusive units in
the Southern Thomson district suggests the cause of the magnetics and gravity anomaly is not due to
a similar style intrusive geology unit. Furthermore, the likelihood that the feature is due to an
intermediate dyke or sill is also thought to be unlikely due to its relatively short strike length and
discrete pipe-like geometry.
The anomaly's isolated nature, its pipe-like geometry, and coincident gravity high and magnetism
suggest hydrothermal alteration consistent with that seen elsewhere on the Thomson Projectiii.
Figure 3. F4 anomaly 3D magnetic inversion model anomaly shells (Red >0.006 SI) and gravity anomaly
modelled density shells (green >2.72) with surface showing magnetic RTP (section 6613500mN, MGA94 z54).
Figure 4: F4 anomaly cross section showing 3D magnetic inversion model anomaly shells (Red/Blue >0.006 SI)
and gravity anomaly modelled density shells (green >2.72) with surface showing magnetic RTP (section
772500mE, MGA94 z54).
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 4 of 17
Cut-B Anomaly
The coincident gravity high and magnetic high anomaly shows the close spatial relationship between
magnetic material and dense material located in a favourable structural position. Historical drilling
appears to have tested the magnetic anomaly but not the adjacent gravity anomaly, where an increase
in the historical assays and mineralised veins was noted. These veins are within a 300m long zone of
strong silica, albite, tourmaline and biotite alteration indicative of a large, metalliferous, intrusionrelated hydrothermal system.
Figure 5 Plan view of the Cut-B magnetic anomaly shells (Red >0.006 SI) and gravity anomaly modelled density
shells (green >2.78) over aerial image.
Figure 6. Cut-B anomaly 3D magnetic inversion model anomaly shells (Red >0.006 SI) and gravity anomaly
modelled density shells (green >2.72) with surface showing magnetic RTP (section 6613500mN, MGA94 z54).
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 5 of 17
Figure 7: Cut-B anomaly cross section showing 3D magnetic inversion model anomaly shells (Red >0.006 SI)
and gravity anomaly modelled density shells (green >2.72) with historic drilling and surface showing magnetic
RTPiii (section 249750mE, MGA94 z55).
Thomson Project Targeting
Ground Gravity and Magnetic Modelling
Geophysical consultant Mitre Geophysics Pty Ltd has completed unconstrained 3D inversion modelling
of the recently completed gravity survey over the F4, Cut-B, F3 and Cut-A anomalies, which were
recognised as Priority-1 magnetic targets in the Thomson Project.
The ground gravity survey was completed on a regional 1,200m x 1,200m grid pattern with in-fill
surveying completed down to 200m x 200m in areas of interest for a total of 540 stations. These
surveys covered a total area of approximately 173km2.
The survey results have formed a powerful dataset when used in conjunction with the magnetic 3D
unconstrained inversion models that were completed on the available airborne and ground magnetic
data.
The modelling was completed for the residual magnetic data of each prospect, selected profiles of the
magnetic data for some of the prospects were extracted, and parametric profile (2.5D) modelling of
those profiles was completediii.
Ambient Noise Tomography Geophysics
An ANT survey was completed over the project area using Fleet Space Technologies’
(https://www.fleetspace.com) ‘Exosphere’ technology. The Exosphere ANT technology is a passive
seismic exploration technique that utilises seismic noise derived from natural and anthropogenic
sources to visualise the three-dimensional subsurface changes in seismic velocity which is collected
and modelled in real-time via a satellite network.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 6 of 17
ANT surveys completed elsewhere (Benson et. al, 2007 and Chen et. al., 2021) have demonstrated
that magmatic intrusions, hydrothermal alteration, and faults can respectively manifest as zones of
high and low seismic velocity.
The Thomson Project survey comprised of 200 geodes, spaced approximately 1,200m apart and
covered 173km2. Data processing used 3D shear velocity models generated via Fleet Space
Technologies' proprietary automated data processing.
An initial interpretation has been completed, with several features of interest being:
•
East-west trending boundary between mod-velocity and lower-velocity domains suggesting
the responses may be lithologically controlled and possibly a major fault trend. The F4
anomaly sits on the boundary of these two velocity domains.
•
A low-velocity zone within the Cut-B magnetic anomaly area and semi-coincident with the
Cut-B gravity anomaly. This is interpreted to possibly represent a deeper sulphide bearing
intrusion manifest as a coincident zone of elevated gravity and magnetic data.
•
Significant breaks in high-velocity trends possibly reflecting major, previously unrecognised
NNW-SSE trending faults.
Pending Drilling Assays iii
2F2F
Sampling of over 1,000m of previously unsampled mineralised and strongly altered historic drill core
is expected to be returned late March - early April 2025 (total of 1,089 samples). These results are
expected to further inform future drill targeting at partially tested geophysical anomalies. These
assays have the potential to expand previously known mineralised drilling intercepts and provide
vectors towards IRG-Cu mineralisation for future drill testing.
CUT-A Anomaly
Cautionary Note – Visual Estimates of Mineralisation: ‘Visual estimates of mineral abundance should
never be considered a proxy or substitute for laboratory analyses where concentrations or grades are
the factor of principal economic interest. Visual estimates also potentially provide no information
regarding impurities or deleterious physical properties relevant to valuations.’
Figure 8. CUTAD01, 225.3m – Unsampled pyrrhotite (brown-bronze)-chalcopyrite (yellow)-pyrite (brass yellow)
in quartz veiniii.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 7 of 17
Figure 9. CUTAD01, 433m – Unsampled pyrite (brass yellow) – chalcopyrite (yellow) quartz veiniii (see
Cautionary Note Page 6).
CUTBD03 Anomaly
Figure 10. CUTBD03, 145m – Unsampled pyrite(brass-yellow)-pyrrhotite (brown-bronze) in quartz veiniii (see
Cautionary Note Page 6).
Figure 11. CUTBD02, 419.8m – Unsampled arsenopyrite (grey) in quartz veiniii (see Cautionary Note Page 2).
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 8 of 17
Thomson Project – Intrusion-Related Gold and Copper
Figure 12. Project overview showing EL9190, EL9194, EL9728 and examples of “bullseye” magnetic targets
(inset).
Located west of Bourke, the Thomson Project covers 5,500km2 of tenure under granted and pending
exploration licences, securing a belt-scale exploration opportunity for Legacy Minerals shareholders.
Legacy Minerals is now exploring nine projects in NSW, with four under farm-in and joint venture
agreements covering more than 8,000km2 of tenure.
The Thomson Project is located near the southern margin of the Thomson Orogen nearby the
interpreted contact with the Lachlan Fold Belt and the Delamerian Orogen. The Thomson Orogen
covers a large area of Queensland and north-western New South Wales, mostly under cover of the
Mesozoic Eromanga Basin.
The dominant basement rocks are interpreted to consist of Cambrian to Ordovician volcanics,
metamorphosed turbidite, siltstone, and slate that are intruded by Silurian to Devonian felsic and
mafic igneous rocks:
•
Several deep stratigraphic drillholes, such as Tongo1, Laurelvale 1, completed by the NSW
Geological Survey (GSNSW) iv.
Historic drillholes completed by previous exploration companies.
The incorporation and interpretation of regional geophysical data (aeromagnetic, gravity and
seismic) conducted by the GSNSW with geology logged in drill holes.
3F3F
•
•
The Thomson Project is covered by younger sediments that ranges up to 280m thick. These sediments
are part of the Eromanga and the Surat Basin cover sequences.
Historically this cover has partly, deterred exploration and has limited the realisation of the Thomson
Orogen’s mineral potential. Importantly, historical work indicates that this cover sequence is
geophysically transparent, with a number of the key geophysical targeting methods, such as magnetics
and gravity, providing highly useful and important data sets.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 9 of 17
The GSNSW has suggested that the basement rocks within the Thomson Orogen can hold similar
mineral potential to the adjoining belts, including the base metal and gold endowment of the Lachlan
Orogen to the south, which is over 80Moz gold and 13Mt copper v. A series of major, belt-scale faults
are observable, which may act as major fluid flow conduits during both early extensions and later
deformation of the belt.
4F4F
For more information:
Investors:
Chris Byrne
CEO & Managing Director
chris.byrne@legacyminerals.com.au
+61 (0) 499 527 547
Media:
Nicholas Read
Read Corporate
nicholas@readcorporate.com.au
+61 (0) 419 929 046
DISCLAIMER AND PREVIOUSLY REPORTED INFORMATION
Information in this announcement is extracted from reports lodged as market announcements referred to above and
available on the Company’s website https://legacyminerals.com.au/. The Company confirms that it is not aware of any new
information that materially affects the information included in the original market announcement and that all material
assumptions and technical parameters underpinning the estimates in the relevant market announcement continue to apply
and have not materially changed.
This announcement contains certain forward-looking statements. Forward looking statements are only predictions and are
subject to risks, uncertainties and assumptions which are outside of the control of Legacy Minerals Holdings Limited (LGM).
These risks, uncertainties and assumptions include commodity prices, currency fluctuations, economic and financial market
conditions, environmental risks and legislative, fiscal or regulatory developments, political risks, project delay, approvals and
cost estimates. Actual values, results or events may be materially different to those contained in this announcement. Given
these uncertainties, readers are cautioned not to place reliance on forward-looking statements. Any forward-looking
statements in this announcement reflect the views of LGM only at the date of this announcement. Subject to any continuing
obligations under applicable laws and ASX Listing Rules, LGM does not undertake any obligation to update or revise any
information or any of the forward-looking statements in this announcement to reflect changes in events, conditions or
circumstances on which any forward-looking statements is based.
COMPETENT PERSON’S STATEMENT
The information in this Report that relates to Exploration Targets and Exploration Results is based on information compiled
by Thomas Wall, a Competent Person who is a Member of the Australian Institute of Geoscientists. Mr Wall is the Technical
Director and a full-time employee of Legacy Minerals Pty Limited, the Company’s wholly-owned subsidiary, and a shareholder
of the Company. Mr Wall has sufficient experience that is relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 edition of the
Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Wall consents to the
inclusion of the matters based on this information in the form and context in which it appears in this announcement.
The information in this announcement that relates to the Mineral Resource Estimate and classification of the Drake Project
is based on information compiled by Kate Kitchen, who is a Member of the Australasian Institute of Mining and Metallurgy
and a Member of the Australian Institute of Geoscientists. Kate Kitchen is an independent consultant employed full time by
Mining Plus Pty Ltd. Kate Kitchen has sufficient experience that is relevant to the style of mineralisation and type of deposit
under consideration and to the activity which she is undertaking to qualify as a Competent Person as defined in the 2012
Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (‘the JORC code’).
Kate Kitchen consents to the inclusion in the report of the matters based on the information in the form and context in which
it appears.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 10 of 17
About Legacy Minerals
Legacy Minerals is an ASX-listed public company that has been exploring gold, copper, and base-metal projects
in NSW since 2017. The Company has nine projects that present significant discovery opportunities for
shareholders.
0BAu-Ag Black Range (EL9464, EL9589)
1BCu-Au Drake (EL6273, EL9616, EL9727, ALA75)
Extensive low-sulphidation, epithermal system with
limited historical exploration. Epithermal occurrences
across 30km of strike.
Large caldera (~150km2) with similar geological
characteristics to other major pacific rim low-sulphidation
deposits.
2BCu-Au Rockley (EL8926)
3B Au-Cu (Pb-Zn) Cobar (EL9511) Helix JV
Prospective for porphyry Cu-Au and situated in the
Macquarie Arc Ordovician host rocks with historic highgrade copper mines that graded up to 23% Cu.
Undrilled targets next door to the Peak Gold Mines.
Several priority geophysical anomalies and gold in lag up
to 1.55g/t Au.
Au-Ag Bauloora (EL8994, EL9464) Newmont JV
One of NSW’s largest low-sulphidation, epithermal
systems with a 27km2 epithermal vein field.
Cu-Au Glenlogan (EL9614) S2 Resources JV
Large, undrilled magnetic anomaly underneath Silurian
cover located 55kms from Cadia Valley.
6B Au Harden (EL9657)
Large historical high-grade quartz-vein gold
mineralisation. Drilling includes 3.6m at 21.7g/t Au 116m
and 2m at 17.17g/t Au from 111m.
Au-Cu Fontenoy (EL8995) Earth AI JV
Significant PGE, Au and Cu anomalism defined in soil
sampling and drilling. Significant drill intercepts include
120m @ 0.3g/t PGE from 298, and 79m at 0.27% Cu from
1.5m.
4BCCu-Au Thomson (EL9190, EL9194, EL9728)
Prospective for intrusion-related gold and copper systems the project contains numerous ‘bullseye’ magnetic and
gravity anomalies that remain untested.
Figure 13. Location of Legacy Minerals’ Projects in NSW, Australia, and major mines and deposits
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 11 of 17
Appendix 3 – JORC Code, 2021 Edition Table 1
Section 1 Sampling Techniques and Data
Criteria
JORC Code Explanation
Commentary
Nature and quality of sampling (e.g., cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc).
These examples should not be taken as limiting the
broad meaning of sampling.
No drilling conducted.
Ambient Noise Tomography (ANT) Survey
was completed by Fender Geophysics. Two
hundred (200) Geodes® (Geodes) plus
spares enabled for real-time data acquisition
and uplink, including live survey monitoring
tools via ExoSphere Cloud interface. Station
spacing was 1,200m x 1,200m with minor
adjustments to account for terrain.
Sampling
Techniques
Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
Drilling
techniques
The gravity data was collected by Fender
Geophysics using a Scintrex CG5 gravimeter.
Station spacing was on a 1,200m x 1,200m
grid for the regional surveys with infill to
200m x 200m over areas of interest. Gravity
stations at ANT geode locations were
surveyed using Post Processed Kinematic
(PPK) methodology due to the wide (1200m)
distribution, while the other stations were
surveyed using Real Time Kinematic (RTK)
methodology. The survey data was tied to
the Australian National Gravity Datum
utilising the GA gravity benchmark
64911106 located at Wanaaring.
Aspects of the determination of mineralisation
that are Material to the Public Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple (e.g.
‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce
a 30 g charge for fire assay’). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g.,
submarine nodules) may warrant disclosure of
detailed information.
Drill type (e.g., core, reverse circulation, open‐hole
hammer, rotary air blast, auger, Bangka, sonic, etc)
and details (e.g., core diametre, triple or standard
tube, depth of diamond tails, facesampling bit or
other type, whether core is oriented and if so, by
what method, etc).
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Method of recording and assessing core and
chip sample recoveries and results assessed.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Page 11 of 17 | ABN 43 650 398 897
3/202 Russell Street Bathurst, 2795
www.legacyminerals.com.au
ASX: LGM
Page 12 of 17
Drill sample
recovery
Logging
Sub‐sampling
techniques and
sample
preparation
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Whether core and chip samples have been
geologically and geotechnically logged to a level of
detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc) photography.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
The total length and percentage of the relevant
intersections logged.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
If core, whether cut or sawn and whether quarter,
half or all core taken.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
If non‐core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Quality control procedures adopted for all
subsampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in-situ material collected,
including for instance results for field
duplicate/second‐half sampling.
Whether sample sizes are appropriate to the
grain size of the material being sampled.
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or total.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
laboratory
tests
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Gravity data has been reviewed by
consultants and the Competent Person and
is considered to be of a good quality and
mapping sub-surface density. Anomalies
associated with infrastructure have been
ignored.
Quality of
assay data and
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
For geophysical tools, spectrometres, handheld XRF
instruments, etc, the parametres used in
determining the analysis including instrument make
and model, reading times, calibrations
factors applied and their derivation, etc.
Fleet Space Technologies Pty Ltd (Fleet
Space Technologies) completed two surveys
over a month.
Ambient Noise Tomography (ANT) Survey.
Two hundred (200) Geodes® (Geodes) plus
spares enabled for real-time data acquisition
and uplink, including live survey monitoring
tools via ExoSphere Cloud interface.
Data processing uses 3D shear velocity
models generated via Fleet Space
Technologies' proprietary automated data
processing in ExoSphere Cloud, which allows
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 13 of 17
unlimited user access to view and export 3D
model results
Ambient noise tomography uses the Earth’s
background hum as the signal for measuring
subsurface velocity structure. An array of
seismic sensors (Geodes) records ambient
seismic noise created by natural and
anthropogenic sources from which the
travel-times of surface waves between pairs
of Geodes is extracted via the process of
cross-correlation and stacking. This
technique effectively transforms each pair
into a virtual source-receiver pair, from
which the phase velocity versus frequency
relationship (dispersion) can be measured
and used to model the subsurface velocity
structure
Nature of quality control procedures adopted
(e.g., standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (i.e., lack of bias) and precision
have been established.
The verification of significant intersections by
either independent or alternative company
personnel.
Verification of
sampling and
assaying
Location of
data points
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Discuss any adjustment to assay data.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Accuracy and quality of surveys used to locate drill
holes (collar and down‐hole surveys), trenches, mine
workings and other locations used in Mineral
Resource estimation.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Specification of the grid system used.
Data spacing
distribution
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
The use of twinned holes.
Quality and adequacy of topographic control.
and
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
Data spacing for reporting of Exploration
Results.
The grid system used is GDA94, MGA Zone
55 and zone 54
Geophysical surveys were conducted using a
professional specialist contractor. Their
survey control was considered accurate for
the context in which it is presented.
No spaced data is reported other than
geophysical data.
Ground gravity surveying was completed on
a regional 1,200m x 1,200m grid with infill to
200m x 200m over areas of interest. This is
considered reasonable for the system
models the data is being used for.
ANT data, based on a 1,200m x 1,200m grid
survey pattern is considered reasonable for
the system models the data is being used
for.
At the exploration stage, data spacing is
variable and designed to understand the
nature and controls on mineralisation.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 14 of 17
Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s)
and classifications applied. Whether sample
compositing has been applied.
Results are considered early stage, with the
nature and controls on mineralisation still
being established
Whether sample compositing has been applied.
Not applicable: No drilling conducted.
Ground geophysical survey results reported.
The orientation of the grid isn’t relevant to
the outcome of the Gravity and ANT data
collection
Orientation of
data in relation
Whether the orientation of sampling achieves
unbiased sampling of possible structures and
the extent to which this is known, considering
the deposit type.
to geological
structure
Sample
security
Audits or
reviews
An array of seismic sensors (Geodes) records
ambient seismic noise created by natural
and anthropogenic sources from which the
travel-times of surface waves between pairs
of Geodes are extracted via the process of
cross-correlation and stacking. This
technique effectively transforms each pair
into a virtual source-receiver pair, from
which the phase velocity versus frequency
relationship (dispersion) can be measure
Share your feedback
Discover