S2R: Glenlogan Drilling Update
Released
Released
Announcement PDF
ASX Announcement
3 September 2024
GLENLOGAN DRILLING UPDATE
Key Points
• First hole completed to a downhole depth of 1,354.7 metres
• Variety of igneous rocks intersected with range of compositions (monzodiorites,
quartz diorites to gabbros) suggesting multi-phase long-lived intrusive system
• Pervasive weak to moderate chlorite-epidote-pyrite alteration compatible with
outer propylytic alteration zone around potential porphyry system
• Localised hematite alteration of feldspars similar to the intermediate “red rock”
alteration zone found around East Lachlan Fold Belt deposits
• Significant increase in hydrothermal pyrite content throughout last 100 metres
of hole, associated with crosscutting intermediate porphyry dykes
S2 Resources Ltd (“S2” or the “Company”) advises that its wholly owned subsidiary, Red Star Resources
Pty Ltd (“Red Star”), has completed the first diamond drill hole at its Glenlogan project in the Lachlan
Fold Belt of New South Wales, where it is earning up to an 80% interest from Legacy
Minerals (“Legacy”, ASX:LGM).
The hole was designed to test a prominent magnetic anomaly modelled as a vertically oriented
columnar body and interpreted to be a potential copper-gold porphyry target (see S2 ASX
announcement of 29 January 2024). It was collared some distance to the southwest of the centre of
the magnetic anomaly and was designed to drill to the northeast with a relatively flat trajectory in
order to pass through both the vertically oriented magnetic body, any enveloping alteration and/or
mineralised zones surrounding it, and any sub-zones (individual intrusive phases) within it. After
encountering drilling difficulties, the parent hole (SGLD0001) was continued via a daughter wedge hole
(SGLD0001W1) to a final depth 1,354.7 metres, equivalent to a vertical depth of 1,000 metres below
surface (see Figures 1 and 2).
After passing through a cover sequence of shales, sandstones and dacitic volcanics of potential
Devonian or Silurian age, the hole intersected a variety of intrusive rocks including monzodiorites and
gabbros from 464 metres downhole (approximately 350 metres below surface) to the end of the hole.
The contact between the cover rocks and the intrusive bodies is interpreted to be unconformable, with
evidence of the intrusives having been partially weathered (i.e. exposed at surface) prior to being
buried by the younger cover rocks. If correct, this implies a pre-Devonian/Silurian age for the intrusives.
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
Figure 1: Plan of magnetic anomaly and trace of drill hole SGLD0001W1.
The measured magnetic susceptibility of the monzodiorite and gabbroic intrusives is compatible with
the magnetic susceptibility required as a source for the magnetic anomaly modelled from the surface
magnetic data, so this intrusion is interpreted as being responsible for the observed anomaly.
The main monzodiorite to gabbroic intrusion has been intruded by a number of later stage intrusive
units including felsic to intermediate porphyries, aplite and microgranodioritic dykes and mafic dykes.
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
Figure 2: Oblique cross section of hole SGLD0001W1 showing trace of hole with respect to the modelled magnetic
susceptibility isoshells of the target anomaly and geology encountered. Note the presence of a large multiphase
intrusion located below an interpreted unconformable Devonian and/or Silurian sequence, and importantly, the
increase in porphyryry dykes, propylitic alteration and hydrothermal pyrite downhole.
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
The monzodiorites and the gabbro are also pervasively hydrothermally altered, with weak to moderate
chlorite-epidote-pyrite and carbonate alteration, and in places hematite-feldspar alteration (see
Figures 3 and 4). The chlorite-epidote-pyrite alteration assemblage is consistent with the propylitic
alteration halo often found as a more distal, outer shell around porphyry copper-gold deposits, and
the hematite dusting of feldspars is similar to the “red rock” alteration seen within the intermediate
halo between the outer propylitic zone and the inner potassic zone of some of the porphyry deposits
in the East Lachlan Fold Belt.
Figure 3: Examples of chlorite-epidote-pyrite alteration and veining: quartz-chlorite-pyrite veining and alteration
at 827m (LHS), epidote veing and epidote-chlorite alteration at 985m (centre) and chlorite-pyrite-trace
chalcopyrite alteration around vein at 1,264m downhole.
However, only a very low density of quartz-pyrite veins was observed, so the drillhole did not intersect
any features indicative of being close to the inner, potassic alteration zone of a porphyry system, if
such a system is present, and the distribution of these veins did not show any systematic change in
frequency, so does not provide a vector.
There was a marked increase in pyrite alteration and abundance, present as disseminations, blebs and
veinlets, throughout the last 100 metres of the drill hole. The increase in pyrite appears to be related
to several later porphyry dyke intrusions within this interval, and occurs both within the dykes and
throughout adjacent rock units (see Figures 5 and 6). The increase in pyrite is also associated with a
subtle increase in chlorite-epidote alteration. This increase in pyrite and propylitic alteration may
indicate the hole is approaching a mineralised system, however the “pyritic shell” around a porphyry
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
system can extend a significant distance, and there is no guarantee that a pyritic shell will necessarily
contain a copper-rich core.
Figure 4: Examples of hematite dusting of feldspars: with carbonate veining at 873m (top) and with pervasive
hydrothermal pyrite at 1,333m downhole.
Figure 5: Pervasive hydrothermal pyrite in chlorite-epidote altered monzodiorite at 1,334m downhole.
Selected samples from throughout the drillhole have been submitted for multi-element assay,
petrography and spectral analysis to characterise the lithologies and alteration, the presence of any
subtle alteration zonation vectors, and implications for the potential fertility of the system.
The Company is also assessing the merits of various ground geophysical surveys that may also assist in
in vectoring prior to a decision on the location of a second hole given the magnetic body targeted by
the first hole appears to be explained by the broad magnetite bearing intrusive.
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
It is anticipated that initial sample analysis will take 6-8 weeks, with any decision on ground geophysics
prior to a second hole being determined at that stage.
Project background
The Glenlogan project comprises an exploration licence (EL9614) covering 85 square kilometres in the
highly endowed Lachlan Fold Belt of New South Wales, which contains a number of major gold/copper
deposits, including Newmont’s Cadia-Ridgeway operations (36.6Moz gold/8.3Mt copper), Evolution
Mining’s Cowal (8.8Moz gold) and North Parkes (3.3Moz gold/2.9Mt copper) mines, and Alkane’s
Tomingley (1.8Moz gold) mine and Boda (8.4Moz gold/1.5Mt copper) deposit (see Figure 6).
S2 is earning up to an 80% interest in this project from ASX-listed Legacy Minerals (“Legacy”). The
agreement comprises an earnin and joint venture phase, with key terms as follows:
•
•
•
•
S2 Legacy with 1 million ordinary shares on signing, representing a consideration of
approximately A$150,000 at a deemed price of A$0.15 per share
Minimum commitment is to drill the Shellback magnetic anomaly within 12 months
and to undertake 1,200 metres of diamond drilling
S2 can spend A$2 million within 2 years of signing to earn a 51% participating interest
Following this, S2 can elect to spend a further A$4 million within a further 3 years to
earn an additional 19% interest for a 70% participating interest, including a minimum
of 8,000 metres of diamond drilling
At the earn-in point:
•
•
•
•
•
•
A joint venture will be formed with S2 having up to a 70% participating interest and
Legacy having a 30% participating interest
Legacy will have a one-time choice to retain its participating interest or to convert this
to a 20% carried interest
In the circumstance of a participating interest, Legacy must contribute or dilute
Should Legacy’s participating interest drop below 10%, its interest will revert to a 2%
net smelter return (NSR) royalty
S2 can buy down half of this royalty (ie, 1%) for A$3 million at any time up to 3 years
from a joint venture being formed
In the circumstance of a carried interest, S2 will have an 80% interest and Legacy’s 20%
interest will be funded by S2 up to the commencement of commercial production, with
this being will repayable from 70% of the production revenue attributable to Legacy’s
20% interest in a mining operation
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
Figure 6:. Map showing outcropping areas, known deposits/mines, and the location of the Glenlogan target.
This announcement has been provided to the ASX under the authorisation of the S2 Board.
For further information, please contact:
Mark Bennett
Executive Chairman
+61 8 6166 0240
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
Past Exploration results reported in this announcement have been previously prepared and disclosed
by S2 Resources Ltd in accordance with JORC 2012. The Company confirms that it is not aware of any
new information or data that materially affects the information included in these market
announcements. The Company confirms that the form and content in which the Competent Person's
findings are presented here have not been materially modified from the original market
announcement. Refer to www.s2resources.com.au for details on past exploration results.
Competent Persons statement
Information in this report that relates to Exploration Results from Glenlogan is based on information
compiled by Rohan Worland and John Bartlett, who are employees and equity holders of the Company.
Mr Worland is a member of the Australian Institute of Geoscientists (AIG) and has sufficient experience
of relevance to the style of mineralization and the types of deposits under consideration, and to the
activities undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the Joint Ore
Reserves Committee (JORC) Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves. Mr Bartlett is a member of the Australian Institute of Mining and Metallurgy
(MAusIMM) and has sufficient experience of relevance to the style of mineralization and the types of
deposits under consideration, and to the activities undertaken, to qualify as a Competent Person as
defined in the 2012 Edition of the Joint Ore Reserves Committee (JORC) Australasian Code for
Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Worland and Mr Bartlett
consent to the inclusion in this report of the matters based on information in the form and context in
which it appears.
The following Tables are provided to ensure compliance with the JORC code (2012) edition
requirements for the reporting of exploration results.
Hole ID
Depth
(m)
North
East
RL
Azi/Dip
SGLD0001 (Abd)
6,252,870
649,200
292
055/-55
292.8
SGLD0001W1
6,252,870
649,200
292
055/-55
1354.7
SECTION 1: SAMPLING TECHNIQUES AND DATA
Criteria
JORC Code explanation
Sampling techniques
Nature and quality of sampling (e.g. cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc).
These examples should not be taken as limiting the
broad meaning of sampling.
Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used
Commentary
All 2024 drilling was diamond core drilling from surface
completed by Deepcore Australia Pty Ltd, based out of
Bendigo, Victoria.
All 2024 core is split in half by core saw for external
laboratory preparation and analysis.
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
Criteria
Drilling techniques
Drill sample
recovery
Logging
Sub-sampling
techniques and
sample preparation
JORC Code explanation
Commentary
Aspects of the determination of mineralisation
that are Material to the Public Report. In cases
where ‘industry standard’ work has been done this
would be relatively simple (e.g. ‘reverse circulation
drilling was used to obtain 1 m samples from
which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there
is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation
types (e.g. submarine nodules) may warrant
disclosure of detailed information
Based on the distribution of mineralisation the core sample
size is considered adequate for representative sampling.
Drill type (e.g. core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic,
etc) and details (e.g. core diameter, triple or
standard tube, depth of diamond tails, facesampling bit or other type, whether core is
oriented and if so, by what method, etc).
All 2024 drilling was diamond core from surface, PQ, HQ and
NQ3 size. NQ3 core is triple tube wireline. Core orientation
uses the Axis Camp Ori tool.
Method of recording and assessing core and chip
sample recoveries and results assessed
2024 drilling methods are selected to ensure maximum
recovery possible.
Measures taken to maximise sample recovery and
ensure representative nature of the samples
2024 core recovery is collected in a set of standard Excel
templates then transferred to the digital database.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
No drilling results are being reported
Whether core and chip samples have been
geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical
studies.
All 2024 diamond core undergoes geotechnical and geological
logging to a level of detail (quantitative and qualitative)
sufficient to support use of the data in all categories of
Mineral Resource estimation. Diamond core logging includes
records of lithology, alteration, veining, structure and
recovery.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc)
photography.
All 2024 core is photographed.
The total length and percentage of the relevant
intersections logged
All 2024 drill holes are logged in full.
If core, whether cut or sawn and whether quarter,
half or all core taken.
Core is split in half by core saw and one-half sampled and
submitted to the laboratory for analysis.
If non-core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
No non-core sampling was completed by S2 during this drill
program.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
2024 core samples are submitted to ALS and undergo
standard industry procedure sample preparation (crush,
pulverise and split) appropriate to the sample type and
mineralisation style..
Quality control procedures adopted for all subsampling stages to maximise representivity of
samples.
Full QAQC system is in place for 2024 core assays to determine
accuracy and precision of assays.
Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
2024 core is cut to achieve non-biased samples. No duplicate
samples have been collected at this stage.
Whether sample sizes are appropriate to the grain
size of the material being sampled.
Sample sizes are appropriate to the grain size of the material
being sampled.
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
Criteria
JORC Code explanation
Quality of assay data
and laboratory tests
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
Verification of
sampling and
assaying
Location of data
points
Data spacing and
distribution
Orientation of data
in relation to
geological structure
Commentary
Core samples are submitted to ALS for analysis. Au is assayed
using a 25g fire assay with AAS finish (Au-AA25). A multielement suite of 48 elements is assayed by technique MEMS61 (0.25g charge by four acid digest and ICP-MS finish).
The nature and quality of the analytical technique is deemed
appropriate for the mineralisation style. Fire assay for Au is
considered total. Multi-element assay four acid digest are
considered near-total for all but the most resistive minerals
(not of relevance).
For geophysical tools, spectrometers, handheld
XRF instruments, etc, the parameters used in
determining the analysis including instrument
make and model, reading times, calibrations
factors applied and their derivation, etc.
No geophysical tools were used to determine any element
concentrations.
Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy
(i.e. lack of bias) and precision have been
established.
Full QAQC system is in place for 2024 core sample assays
including blanks and standards (relevant certified reference
material).
The verification of significant intersections by
either independent or alternative company
personnel.
No drilling results are being reported
The use of twinned holes.
No twin holes are reported.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
For 2024 drilling the primary sampling data is collected in a set
of standard Excel templates. The information is managed by
S2’s database manager for validation and compilation into
S2’s central database.
Discuss any adjustment to assay data.
No drilling results are being reported
Accuracy and quality of surveys used to locate
drillholes (collar and down-hole surveys), trenches,
mine workings and other locations used in Mineral
Resource estimation.
All 2024 diamond drill holes are surveyed by handheld GPS in
the first instance.
All 2024 diamond drill holes are surveyed downhole using
the Axis Champ Gyro at approximately 12m intervals to
determine accurate drill trace locations. There is no
magnetic interference with respect to downhole surveys.
Specification of the grid system used.
The grid system is MGA GDA94 (Zone 55). Local easting and
northing are in MGA.
Quality and adequacy of topographic control.
Elevation data for all data is determined by a digital elevation
model derived from public domain SRTM 10m Elevation grids
Data spacing for reporting of Exploration Results.
No drilling results are being reported .
Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s)
and classifications applied.
No Mineral Resource or Ore Reserve estimation is reported.
Whether sample compositing has been applied.
No drilling results are being reported
Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the
deposit type.
No drilling results are being reported
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
Criteria
JORC Code explanation
Commentary
If the relationship between the drilling orientation
and the orientation of key mineralised structures is
considered to have introduced a sampling bias,
this should be assessed and reported if material.
No drilling results are being reported
Sample security
The measures taken to ensure sample security.
Chain of custody is managed by S2 personnel. Drill core is
visually checked at the drill rig and then transported to S2’s
Cowra facility where it is cut and sampled before being
secured in a locked shed. Bagged samples are transported to
the ALS laboratory in Orange by S2 personnel.
Audits or reviews
The results of any audits or reviews of sampling
techniques and data.
No audits or reviews have been conducted by S2 at this stage.
SECTION 2: REPORTING OF EXPLORATION RESULTS
Criteria
JORC Code explanation
Mineral tenement
and land tenure
status
Commentary
The Glenlogan project comprises one exploration licences (see list
below), covering approximately 85 square kilometres.
Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
The tenements is held in the name of Legacy Minerals Pty Ltd and
is subject to Earn-in Joint Venture with S2 Resources Ltd (terms
outlined in text of this announcement).
TENID
TENSTATUS
HOLDER
EL 9614
LIVE
Legacy Minerals Pty Ltd
The project is located east of the township of Cowra, within the
Central West region of New South Wales. Access to the project is
via the Mid Western Highway, Olympic Highway and Lachlan
Valley Way, which pass through the tenement.
The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
EL9614 is a granted exploration licence within in New South Wales
and the current term of grant is until 11 February 2026, with the
licence currently considered in good standing.
Prior to accessing the ground S2 is required to obtain signed land
access agreements with the landowners.
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
Criteria
JORC Code explanation
Exploration done
by other parties
Commentary
Historical exploration within the project area has been limited. In
1982, Mines Exploration completed a single deep drill hole,
DDHCV1, to a depth of 629m. The hole, located 1km to the west
of the magnetic target, intersected Devonian sediments to end of
hole at 629m supporting the interpretation of a major fault to the
west of the magnetic target.
Acknowledgment and appraisal of exploration
by other parties.
Reconnaissance drilling in 1992 was completed by Placer
Exploration Limited and intercepted altered monzonite at end of
hole shallow percussion holes drilled directly above the Cowra
Target. Drill holes CRB7 (56m) and CRB57 (96m) were strongly
altered by chlorite-sericite-quartz-zeolite, comparable to the
propylitic alteration commonly found distal to porphyry systems.
Drill holes did not reach the Ordovician basement which is
interpreted to be at approximately 450m depth. Post mineral
intrusions are common in large, long lived mineral systems and as
such the observation of monazite in drilling is considered
encouraging for a large and older intrusive complex at depth in
association with the magnetic anomaly.
Rio Tino held the project between 1994-1997, undertaking
Magnetic modelling which suggested the magnetic anomaly was
approximately 800m below surface, thus the likelihood of a largescale mineral system associated with the magnetic source was not
likely to be amenable to shallow mining methods and drilling was
therefore not conducted.
Geology
The Glenlogan Project is in the Central Lachlan Fold Belt, NSW,
which hosts world-class Au-Cu orebodies including the CadiaRidgeway, Northparkes and Cowal Mines. The project is
considered prospectve for copper-gold porphyry intrusions
and/or associated skarn style copper-gold.
The exploration tenement covers the western margin of the
Siluro-Devonian Cowra trough, located in the Forbes Anticlinal
Zone of the Lachlan Fold Belt. The Ordovician Macquarie Arc
volcanics are interpreted to be buried beneath these later
geological units.
Deposit type, geological setting and style of
mineralisation.
The “Shellback” magnetic anomaly is modelled to intrude to
within 450 – 600m of surface, suggesting the body has not
intruded into the overlying Silurian sequence, thus suggesting
the magnetic body was emplaced during the early Silurian to late
Ordovician, which is a similar timing to the Cadia Valley porphyry
complex (435.9 – 459.7Ma). It is considered that the Silurian age
cover sequence will have been critical in the preservation of any
potential porphyry mineralisation across the Glenlogan Project,
as it was for the preservation of the Cadia Valley porphyry
district.
Comparable aeromagnetic responses to those present at the
Glenlogan project have been reported at other major porphyry
Cu-Au deposits, including: Cadia East (AUS), Grasberg (IND),
Alumbrera (ARG), and Buenavista Del Cobre (MEX). The strong
magnetic response suggests a discrete central magnetic high
possibly due to chalcopyrite-bornite‐magnetite mineralisation,
associated with a porphyry proximal potassic alteration zone,
surrounded by an annular magnetic low due to magnetite
destructive hydrothermal alteration of surrounding rock,
features that are characteristic of globally important Cu-Au
porphyry deposits.
Level 14, 333 Collins Street, Melbourne, VIC 3000, Australia. PO Box 143 Kingsway, WA 6065, Australia
ABN 18 606 128 090 T +61 8 6166 0240 F 61 8 6270 5410 E admin@s2resources.com.au W www.s2resources.com.au
Criteria
JORC Code explanation
Commentary
A summary of all information material to the
understanding of the exploration results
including a tabulation of the following
information for all Material drill holes:
easting and northing of the drill hole collar
elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole collar
dip and azimuth of the hole
down hole length and interception depth
hole length.
All drilling within the project area is historical in nature, and no
drill holes are considered material at this point. Compilation and
validation of the historical datasets is ongoing.
In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of high
grades) and cut-off grades are usually Material
and should be stated.
N/a - no drilling results are considered material or being reported.
Where aggregate intercepts incorporate short
lengths of high grade results and longer lengths
of low grade results, the procedure used for
such aggregation should be stated and some
typical examples of such aggregations should be
shown in detail.
N/a - no drilling results are considered material or being
reported.
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
N/a - no drilling results are considered material or being reported.
Relationship
between
mineralisation
widths and
intercept lengths
These relationships are particularly important in
the reporting of Exploration Results.
If the geometry of the mineralisation with
respect to the drill hole angle is known, its
nature should be reported.
If it is not known and only the down hole lengths
are reported, there should be a clear statement
to this effect (e.g. ‘down hole length, true width
not known’).
N/a - no drilling results are considered material or being
reported.
Diagram
Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for
any significant discovery being reported These
should include, but not be limited to a plan view
of drill hole collar locations and appropriate
sectional views.
Refer to Figures in body of text.
Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low and high
grades and/or widths should be practiced to
avoid misleading reporting of Exploration
Results.
Any historical results considered significant are to be reported.
Other exploration data, if meaningful and
material, should be reported including (but not
limited to): geological observations; geophysical
survey results; geochemical survey results; bulk
samples – size and method of treatment;
metallurgical test results; bulk density,
ground
Share your feedback
Discover