Maiden Scandium Resource at NiCo Young
Released
Released
Announcement PDF
Page 1 of 26 | ABN 43 650 398 897
12/217 Howick St, Bathurst, 2795
www.legacyminerals.com.au
Maiden Scandium Resource at NiCo Young Ni-Co-Sc Project
Globally significant resource containing 6.4kt of scandium (~9.8kt of scandium oxide)
Total Mineral Resource Grows
1.25Mt NICKEL, 114kt COBALT AND 6.4kt SCANDIUM
• NiCo Young’s total Inferred Mineral Resource of 254Mt at 0.49% Ni and 0.04% Co for 1,252kt of
contained nickel and 114kt of contained cobalt, including 200Mt at 31.9ppm Sc for 6.4kt of contained
scandium at Thuddungra.
Project Highlights
ONE OF THE LARGEST SCANDIUM RESOURCES IN NSW
• NiCo Young is now one of the largest scandium resources in NSW by contained scandium, alongside
Sunrise Energy Metals’ (ASX: SRL) Syerston and Rio Tinto’s (ASX: RIO) Burra.
• The Project also hosts the largest reported nickel resource in NSW by contained nickel.
MAIDEN SCANDIUM RESOURCE
• Scandium (Sc) is reported in a NiCo Young Mineral Resource for the first time, adding a third critical
mineral to the Project alongside nickel (Ni) and cobalt (Co).
• Contained scandium of 6.4kt is equivalent to approximately 9.8kt of scandium oxide (Sc₂O₃).
STRATEGIC PROJECT HOLDING
• Held 100% by Legacy Minerals under granted EL9804 and application ELA7097 (Thuddungra West,
pending grant), free of private royalties, liabilities and encumbrances.
NEXT STEPS
• The Company will assess strategic partnerships and development options for the Project.
Management Comment Legacy Minerals CEO and Managing Director, Christopher Byrne, said:
“This maiden scandium Resource adds a third critical mineral to NiCo Young, which already hosts one of
Australia’s largest contained nickel and cobalt Resources, 100% owned by Legacy Minerals and free of
private royalties and encumbrances.
Scandium supply is concentrated and increasingly restricted for a market forecast for significant growth,
and Western governments are moving to secure it. Since the United States and Australia signed their
Critical Minerals Framework in October 2025, the two governments have committed more than A$5
billion to Australian critical minerals projects, with scandium, nickel and cobalt all among the minerals
supported.
The NiCo Young Resource now reports scandium alongside nickel and cobalt for the first time and is one
of the largest scandium resources in NSW, alongside Sunrise’s Syerston and Rio Tinto’s Burra. Our Project
presents a significant opportunity, and the Company is assessing strategic partnership and development
options.”
ASX Announcement
23 November 2026 ASX: LGM
See Endnotes on Page 25 for references
Page 2 of 26
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Legacy Minerals Holdings Limited (ASX: LGM, “LGM”, “the Company” or “Legacy Minerals”) is pleased to
report an updated Mineral Resource Estimate for its 100%-owned NiCo Young Nickel-Cobalt-Scandium Project,
located in central New South Wales. The updated MRE covers the Thuddungra East and Thuddungra West
deposits, was prepared by WSP and reports scandium alongside nickel and cobalt for the first timei
.
Figure 1. Nickel-cobalt-scandium deposits and occurrences of New South Wales (Refer to Table 5 and Appendix 2 for
details and sources).
Updated Mineral Resource Estimate
The updated Thuddungra MRE comprises an Inferred Mineral Resource of 200Mt at 0.45% Ni, 0.04% Co and
31.9ppm Sc, for contained metal of 896kt of nickel, 89kt of cobalt and 6.4kt (6,381t) of scandium (Table 1).
The MRE is reported at a 0.60% NiEq cut-off within an optimised open pit shell, which has been used to
demonstrate reasonable prospects for eventual economic extraction (RPEEE) on the basis of open pit mining
and HPAL processing (Figure 1). The estimate incorporates a revised weathering model, a cleaned scandium
dataset and NiEq assumptions that include nickel, cobalt and scandium recoveries by weathering domain.
The estimate covers the Thuddungra East and Thuddungra West deposits, where laterite-hosted
mineralisation extends from near surface. It is a full re-estimation by WSP and replaces the Thuddungra
component (114.3Mt at 0.56% Ni and 0.06% Co) of the Inferred Mineral Resource reported by the Company
on 1 July 2025ii
, which was based on a 2017 estimate of nickel and cobalt only. Thuddungra West has not
previously been included in a Mineral Resource reported by the Company. The Ardnaree deposit was not re-
estimated and its Mineral Resource is unchanged (see 'Total NiCo Young Mineral Resource' below).
Page 3 of 26
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Table 1. Thuddungra East and Thuddungra West Mineral Resource Estimate at a 0.60% NiEq cut-off (WSP, November
2026).
Classification Tonnes
(Mt)
Ni (%) Co (%) Sc (ppm) Contained Ni
(kt)
Contained
Co (kt)
Contained Sc
(kt)
Inferred 200 0.45 0.04 31.9 896 89 6.4
Total 200 0.45 0.04 31.9 896 89 6.4
Notes: Differences may occur in totals due to rounding. Tonnages are reported on a dry basis. The Mineral Resource is reported at a 0.60% NiEq cut-
off within an optimised open pit shell (HPAL processing case). NiEq is calculated by material type using the formulae, metal prices and metallurgical
recoveries set out under 'Cut-off Grade and Nickel Equivalent' below. Contained metal is in situ and does not allow for mining or metallurgical losses.
Scandium is reported as scandium metal; 6.4kt Sc is equivalent to approximately 9.8kt Sc₂O₃ (conversion factor 1.534).
Cautionary statement - Inferred Mineral Resources: The entire Mineral Resource reported in this
announcement is classified as Inferred. An Inferred Mineral Resource has a lower level of geological confidence
than an Indicated or Measured Mineral Resource, because the geological evidence is sufficient to imply, but
not verify, geological and grade continuity. There is no certainty that further exploration will result in the
determination of Indicated or Measured Mineral Resources, or that any part of the Inferred Mineral Resource
will be upgraded to a higher confidence category. Inferred Mineral Resources cannot be converted to an Ore
Reserve, and no Ore Reserve has been estimated for the Project. The tonnage, grade and contained metal of
the Mineral Resource may change with further drilling, data validation and technical work.
Cut-off grade sensitivity: The Mineral Resource is reported at a 0.60% NiEq cut-off. Table 2 shows the
sensitivity of the estimate to a higher NiEq cut-off grade within the same optimised open pit shell. At a 1.00%
NiEq cut-off the estimate is 150Mt at 0.50% Ni, 0.052% Co and 36.0ppm Sc. The tonnage and grade at the
higher cut-off are a subset of the Mineral Resource in Table 1 and are not additional to it.
Table 2. Sensitivity of the Thuddungra East and Thuddungra West Mineral Resource Estimate to NiEq cut-off grade.
NiEq cut-off Tonnes
(Mt)
NiEq
(%)
Ni (%) Co (%) Sc
(ppm)
Contained
Ni (kt)
Contained
Co (kt)
Contained
Sc (kt)
0.60% (Mineral
Resource)
200 1.32 0.45 0.044 31.9 896 89 6.4
1.00% 150 1.49 0.50 0.052 36.0 755 78 5.4
Notes: Differences may occur in totals due to rounding. All material is classified as Inferred and is reported within the optimised open pit shell used for
Table 1. The figures at the 1.00% NiEq cut-off are a subset of the Mineral Resource reported at the 0.60% NiEq cut-off and are shown for sensitivity
only. Cobalt grades are shown to three decimal places.
Figure 2. Oblique view of the NiCo Young block model and the optimised open pit shell used to constrain the Mineral
Resource, showing the estimation domains and all drilling.
Page 4 of 26
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Total NiCo Young Mineral Resource
Together with the existing Ardnaree Mineral Resource, the total Mineral Resource at the NiCo Young Project
is 253.6Mt for 1,251.6kt of contained nickel, 113.6kt of contained cobalt and 6.4kt of contained scandium
(Table 3). Ardnaree hosts an Inferred Mineral Resource of 53.6Mt at 0.66% Ni and 0.05% Co, for 355.6kt of
contained nickel and 24.6kt of contained cobalt, as reported in the Company's ASX release of 1 July 2025.
Ardnaree was not re-estimated by WSP, and scandium has not yet been estimated there.
The total Project Mineral Resource has increased by 51% in tonnage, from the 167.8Mt reported on 1 July
2025 to 253.6Mt. Contained nickel has increased by 26%, from 996.7kt to 1,251.6kt, and contained cobalt by
18%, from 96.6kt to 113.6kt. The increase mainly reflects the first-time inclusion of Thuddungra West, the pit-
constrained reporting basis applied at Thuddungra, and the addition of scandium, which is now included in
the nickel equivalent calculation.
Thuddungra East and Ardnaree are within granted Exploration Licence EL9804. Thuddungra West is within
Exploration Licence Application ELA7097, lodged by the Company's wholly-owned subsidiary Nickel Mines Pty
Ltd.
Table 3. Total NiCo Young Project Mineral Resource by deposit (all Inferred).
Deposit Tonnes
(Mt)
Ni (%) Co (%) Sc (ppm) Contained Ni
(kt)
Contained
Co (kt)
Contained Sc
(kt)
Thuddungra
East and West
200 0.45 0.04 31.9 896 89 6.4
Ardnaree 53.6 0.66 0.05 n/a 355.6 24.6 n/e
Total NiCo
Young
253.6 0.49 0.04 n/a 1,251.6 113.6 6.4
Notes: All Mineral Resources are classified as Inferred. Differences may occur in totals due to rounding. n/e: not estimated. n/a: not applicable.
Thuddungra East and West: WSP estimate, November 2026, reported at a 0.60% NiEq cut-off (NiEq includes scandium) within an optimised open pit
shell (Table 1). Thuddungra East is within granted EL9804 and Thuddungra West is within application ELA7097, which has not been granted. Ardnaree:
reported at a 0.6% NiEq cut-off and extracted from the Company's ASX release of 1 July 2025; within granted EL9804; scandium has not been estimated.
The total combines estimates prepared at different times, by different Competent Persons and on different cut-off grade and reporting bases, and is
provided to show the total contained metal within the Project. Total grades are tonnage-weighted averages. Total contained scandium is for
Thuddungra East and West only.
Table 4. Thuddungra East and Thuddungra West Mineral Resource Estimate by tenement (all Inferred).
Tenement Mass (Mt) Average Value Contained Metal
Ni (%) Co (%) Sc (ppm) Ni (kt) Co (kt) Sc (kt)
EL9804 176 0.44 0.04 32.2 778 79 5.7
ELA7097 24 0.49 0.04 29.8 118 10 0.7
Total 200 0.45 0.04 31.9 896 89 6.4
Notes: All Mineral Resources are classified as Inferred. Differences may occur in totals due to rounding. Tenement split is for the Thuddungra East and
West Mineral Resource (Table 1) reported at a 0.60% NiEq cut-off within an optimised open pit shell.
Maiden Scandium Resource
Scandium has been recognised at NiCo Young since 2011, when it was first reported by the Project’s former
owner, but it was not included in the Project's subsequent nickel-cobalt estimatesiii
. The updated MRE
incorporates the historical scandium assay data and reports scandium under the JORC Code (2012) for the first
time.
Scandium is hosted in the same near-surface laterite profile as the nickel and cobalt mineralisation, and is
concentrated in the upper parts of the profile. It is estimated across the Thuddungra East and Thuddungra
West deposits and is included as a co-product in the NiEq calculation. The average scandium grade of the
updated MRE is 31.9ppm, for 6.4kt of contained scandium. Scandium has not been estimated at the Ardnaree
Page 5 of 26
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
deposit, due to low scandium levels in the available assays. WSP's analysis of the scandium dataset shows that
scandium is preferentially enriched in the limonite horizon, which has the highest average grade (39.4ppm Sc)
and the lowest grade variability of the weathering domains, followed by the saprolite (27.6ppm Sc). A higher-
grade scandium domain was modelled within the limonite at a 35ppm Sc cut-off.
Nickel-Cobalt-Scandium Deposits of New South Wales
The NiCo Young Project sits within the Lachlan Fold Belt, which hosts most of the nickel-cobalt laterite and
scandium deposits of New South Wales. The major nickel, cobalt and scandium deposits of NSW are shown in
Figure 2 and compared in Table 5, ranked by contained scandium. A breakdown of each Mineral Resource by
classification, with the source announcement, is provided in Appendix 2. The comparison is provided for
context only.
Table 5. Comparison of the NiCo Young Mineral Resource with reported nickel, cobalt and scandium Mineral
Resources at major New South Wales deposits, ranked by contained scandium.
Deposit (Owner) Reported Mineral Resource Contained Sc
(kt)
Contained Ni
(kt)
Contained Co
(kt)
Syerston (Sunrise Energy Metals
Limited, ASX: SRL)
51.7Mt @ 408ppm Sc 21.1 n/r n/r
Burra (Rio Tinto) 35.6Mt @ 405ppm Sc, 0.10% Ni,
0.06% Co
~14.3 ~35.6 ~21.4
Murga (Rimfire Pacific Mining
Limited, ASX: RIM)
56.1Mt @ 138ppm Sc 7.8 n/r n/r
NiCo Young (Legacy Minerals
Holdings Limited, ASX: LGM)
253.6Mt @ 0.49% Ni, 0.04% Co,
including 200Mt @ 31.9ppm Sc
6.4 1,251.6 113.6
Nyngan (Scandium International
Mining Corp., TSXV: SCY)
16.9Mt @ 235ppm Sc ~4.0 n/r n/r
Flemington (Australian Mines
Limited, ASX: AUZ)
6.3Mt @ 446ppm Sc, 1,350ppm Ni,
601ppm Co
~2.8 ~8.5 ~3.8
Broken Hill Cobalt Project (Cobalt
Blue Holdings Limited, ASX: COB)
126.5Mt @ 690ppm Co, 7.5% S,
134ppm Ni
n/r ~17.0 87.3
Notes: n/r: not reported. All deposits are in NSW. Figures are total Mineral Resources (all classifications) drawn from the public disclosures of the
respective owners, are current as at the date of this announcement to the best of the Company's knowledge, and are provided for context only. The
classification breakdown and source announcement for each deposit are set out in Appendix 2. Peer Mineral Resources are reported at each owner's
own cut-off grade and on different bases, so they are not directly comparable with one another or with NiCo Young, and peer deposits are not
necessarily analogous to the NiCo Young deposit. Values marked ~ are not reported by the owner and have been calculated by the Company from the
reported tonnes and grade; Burra contained scandium is converted from the reported 22,000t of Sc₂O₃ using a factor of 1.534. Syerston is the scandium
Mineral Resource reported by Sunrise Energy Metals in September 2025. NiCo Young is the total Project Mineral Resource (Table 3), all Inferred;
scandium is estimated at Thuddungra East and West only, and the 0.60% NiEq cut-off at Thuddungra includes scandium. The Nyngan estimate is
reported under NI 43-101 and not under the JORC Code.
Summary of Material Information (ASX Listing Rule 5.8.1)
The following is a summary of the material information used to estimate the updated Thuddungra East and
Thuddungra West Mineral Resource, as required by ASX Listing Rule 5.8.1. The Ardnaree Mineral Resource is
unchanged, and its material information is set out in the Company's ASX release of 1 July 2025. Further detail
is provided in JORC Code (2012) Table 1 in Appendix 1.
Geology and Geological Interpretation
Mineralisation at NiCo Young is hosted within a lateritic weathering profile developed over the Cambrian-
Ordovician Wambidgee Serpentinite, which occurs as elongate north-south trending ultramafic bodies
intruded into the Ordovician Jindalee Beds and is flanked to the east by the Silurian Young Granodiorite.
Prolonged weathering and lateritic alteration of the serpentinite has leached mobile elements such as silica
Page 6 of 26
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
and magnesium and concentrated relatively immobile elements including iron, aluminium, nickel, cobalt and
scandium.
Two deposits have been identified: Ardnaree and Thuddungra. The Ardnaree deposit extends over 9km along
strike and up to 700m across strike, with mineralisation from surface to a maximum vertical depth of 56m.
The Thuddungra deposit extends 5.9km along strike and up to 715m across strike, with mineralisation from
6m below surface to a maximum vertical depth of 98m. The laterite profile typically comprises hematitic and
limonitic clay overlying saprolite, which in turn overlies weathered serpentinite. Scandium is concentrated in
the upper layers, followed by cobalt enrichment in the limonitic clay and saprolite, and nickel enrichment in
the saprolite and weathered serpentinite. For the updated MRE, WSP built a weathering model in Leapfrog
Geo from logged drillhole weathering data, comprising five domains: alluvium, limonite, saprolite, saprock and
fresh. Repeated limonite and saprolite intervals in the drilling were modelled as separate units before being
combined into single domains. Mineralisation has been assigned to three material types: limonite, saprolite
and saprock.
Drilling Techniques
The MRE is based on drilling completed by the Project's former owner between 1998 and 2014. No new drilling
has been completed by the Company. Approximately 63% of the drilling used aircore (AC) techniques and 35%
reverse circulation (RC), with three triple-tube diamond (DD) holes. All holes were drilled vertically, which is
approximately perpendicular to the sub-horizontal mineralisation. At Ardnaree, holes were drilled on 30
sections spaced 90m to 650m apart along strike, and at Thuddungra on 18 sections spaced 200m to 420m
apart, with holes averaging 100m apart across strike. Drill collars were surveyed by differential GPS. Collar
details were reported in the Company's ASX release of 1 July 2025.
Sampling and Sub-Sampling Techniques
AC holes (85mm or 100mm diameter) and RC holes (100mm or 127mm face-sampling hammers) were sampled
at 1m downhole intervals, with samples split by riffle splitter. Wet samples were grab sampled, air dried and
then split. Triple-tube HQ3 diamond core was sampled at 1m intervals as quarter core. Quality assurance
measures included standards, blanks and field duplicates, and one in 20 sample pulps was sent to an
independent laboratory for check analysis.
Sample Analysis Method
Sample preparation was carried out by ALS in Orange and analysis by ALS in Brisbane. Samples from drilling
before 2004 were analysed for nickel and cobalt using a variety of digests with AAS or ICP finishes, and
approximately half of these samples were also analysed for scandium by ICP-OES. Samples from 2004 to 2008
were analysed by four-acid digest and ICP-OES, and samples from 2014 onwards by four-acid digest and multi-
element ICP-OES. As part of a scandium data quality review, drillholes with scandium assays rounded to the
nearest 10ppm, predominantly from the T9A drilling program, were excluded from the estimate, while
drillholes with assays rounded to the nearest 5ppm were retained because they provide important spatial
coverage across Thuddungra East and West. A cleaned scandium variable was used for all statistical analysis
and estimation.
Estimation Methodology
Nickel, cobalt and scandium grades were estimated into a three-dimensional block model by WSP using
Leapfrog Geo and Leapfrog Edge software. Estimation domains were based on the weathering model
(alluvium, limonite, saprolite, saprock and fresh), with the limonite further divided into high-grade (above
35ppm Sc) and lower-grade (below 35ppm Sc) scandium domains created using radial basis function models.
Assays were composited to 1m, and top cutting was not applied because the coefficients of variation are low.
Variograms were modelled for each element and domain, and grades were estimated by Ordinary Kriging
using hard domain boundaries in three passes, at one, two and three times the variogram range. The block
model uses parent blocks of 100m x 100m x 2m, approximately half the dominant drill spacing in well-informed
Page 7 of 26
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
areas, sub-blocked to 12.5m x 12.5m x 0.25m to represent the variable thickness of the weathering horizons.
Bulk densities of 1.87t/m³ (limonite), 1.84t/m³ (saprolite) and 2.18t/m³ (serpentinite) from the 2012 Geostat
model were assigned by material type. The estimate was validated by visual comparison of block and
composite grades, global comparison of declustered composite and block grades, and swath plots, which show
good local reproduction of input grades where data support is sufficient.
Classification Criteria
The whole of the Mineral Resource has been classified as Inferred in accordance with the JORC Code (2012).
Classification was based on the distance to drillholes, the variogram modelled ranges, the geological and
structural interpretation, and data quality (including assay and QAQC quality, documentation, density
information and validation). Areas within the mineralised domains are considered to have sufficient
confidence in grade continuity between intercepts for Inferred classification, and all other blocks are
Unclassified. No Measured or Indicated classification has been applied because of the historical nature of the
drilling. Inferred Mineral Resources have a lower level of confidence and there is no certainty that they will be
upgraded to a higher category with further work. Further density validation and measurements are
recommended to increase confidence in the estimate.
Cut-off Grade and Nickel Equivalent
The MRE is reported at a cut-off grade of 0.60% NiEq. This is above the NiEq grade required to cover the
assumed processing, refining and royalty costs for each material type at the stated metal prices and recoveries.
Nickel equivalent grades are calculated by material type using the following formulae, where Ni and Co are in
percent and Sc is in parts per million:
Material type Nickel equivalent formula
Limonite and saprolite NiEq (%) = Ni (%) + 3.1981 x Co (%) + 0.022723 x Sc (ppm)
Saprock NiEq (%) = Ni (%) + 3.3862 x Co (%) + 0.024059 x Sc (ppm)
The formulae are based on metal prices of US$18,000/t nickel (US$8.20/lb), US$55,116/t cobalt (US$25.00/lb)
and US$3,000/kg scandium oxide, an exchange rate of A$1.00 = US$0.65, and the HPAL metallurgical
recoveries shown in Table 6. Scandium metal grades are converted to scandium oxide using a factor of 1.534.
Table 6. HPAL metallurgical recoveries by material type used in the nickel equivalent calculation.
Metal Limonite (%) Saprolite (%) Saprock (%)
Nickel 90 90 85
Cobalt 94 94 94
Scandium 80 80 80
It is the Company's opinion that nickel, cobalt and scandium all have reasonable potential to be recovered and
sold. At the average grades of the MRE, scandium contributes more than half of the nickel equivalent grade,
so the estimate is sensitive to the scandium price and recovery assumptions. The scandium recovery of 80% is
based on metallurgical testwork reported by the Project’s former owner, Jervois Mining Limited (ASX release
22 November 2017), which reported scandium recoveries above 80%. The nickel and cobalt recoveries are
based on HPAL testwork completed for the former owner in 2000 on Thuddungra East and Thuddungra West
composite samples, which returned leach extractions of up to 86% to 95% nickel and 94% to 95% cobalt. The
scandium oxide price of US$3,000/kg is a long-term assumption for supply from outside China. The basis for
these assumptions is set out in Section 3 of JORC Table 1 (Appendix 1).
Mining and Metallurgical Methods and Parameters
RPEEE has been assessed by constraining the MRE within an optimised open pit shell. The mineralisation
occurs from near surface in soft lateritic material and is assumed to be mined by conventional truck and shovel
open pit methods with little or no blasting. Processing is assumed to be by HPAL, which is widely used for
Page 8 of 26
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
lateritic nickel-cobalt ores. Testwork reported by the former owner indicated that HPAL would extract most
of the nickel and cobalt with lower acid consumption than direct acid or heap leaching. No Ore Reserve has
been estimated for the Project. The pit optimisation used the metal prices and HPAL recoveries set out above,
an overall pit slope angle of 35 degrees, a mining cost of A$3.70/t, processing costs of A$79/t (limonite),
A$93/t (saprolite) and A$85/t (saprock) milled, a refining cost of A$13/t milled and a State royalty of 4%.
Next Steps
The updated MRE provides a current, pit-constrained Mineral Resource for Thuddungra that includes all three
critical minerals, within a total Project Mineral Resource of 253.6Mt. The Company is progressing the grant of
ELA7097 and will use the updated MRE as the basis for assessing strategic and development options for the
Project, including under its non-binding Memorandum of Understanding with Cobalt Blue Holdings Limited
(ASX: COB).
Page 9 of 26
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
Approved by the Board of Legacy Minerals Holdings Limited
For more information:
Investors:
Chris Byrne
CEO & Managing Director
chris.byrne@legacyminerals.com.au
+61 (0) 499 527 547
Media:
Nicholas Read
Read Corporate
nicholas@readcorporate.com.au
+61 (0) 419 929 046
DISCLAIMER AND PREVIOUSLY REPORTED INFORMATION
Information in this announcement is extracted from reports lodged as market announcements referred to above and
available on the Company's website https://legacyminerals.com.au/. The Company confirms that it is not aware of any
new information that materially affects the information included in the original market announcements, other than the
Thuddungra component of the Mineral Resource Estimate for the NiCo Young Project reported on 1 July 2025, which is
superseded by the Mineral Resource Estimate in this announcement. In respect of the Ardnaree Mineral Resource
reported on 1 July 2025, the Company confirms that all material assumptions and technical parameters underpinning the
estimate continue to apply and have not materially changed.
This announcement contains certain forward-looking statements. Forward-looking statements are only predictions and
are subject to risks, uncertainties and assumptions which are outside of the control of Legacy Minerals Holdings Limited
(LGM). These risks, uncertainties and assumptions include commodity prices, currency fluctuations, economic and
financial market conditions, environmental risks and legislative, fiscal or regulatory developments, political risks, project
delay, approvals and cost estimates. Actual values, results or events may be materially different to those contained in
this announcement. Given these uncertainties, readers are cautioned not to place reliance on forward-looking
statements. Any forward-looking statements in this announcement reflect the views of LGM only at the date of this
announcement. Subject to any continuing obligations under applicable laws and ASX Listing Rules, LGM does not
undertake any obligation to update or revise any information or any of the forward-looking statements in this
announcement to reflect changes in events, conditions or circumstances on which any forward-looking statement is
based.
COMPETENT PERSON'S STATEMENT - THUDDUNGRA MINERAL RESOURCE
The information in this announcement that relates to the updated Mineral Resource Estimate for the Thuddungra East
and Thuddungra West deposits at the NiCo Young Project is based on, and fairly represents, information and supporting
documentation compiled by Kate Kitchen (BSc (Hons), MAIG, MAusIMM), a Competent Person who is a Member of the
Australian Institute of Geoscientists and of the Australasian Institute of Mining and Metallurgy. Kate Kitchen is a full-time
employee of WSP Australia Pty Limited, of which Legacy Minerals Holdings Limited is a client. Kate Kitchen has sufficient
experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being
undertaken to qualify as a Competent Person as defined in the 2012 edition of the Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves. Kate Kitchen consents to the inclusion in this announcement
of the matters based on this information in the form and context in which it appears.
COMPETENT PERSON'S STATEMENT - ARDNAREE MINERAL RESOURCE
The information in this announcement that relates to the Mineral Resource Estimate for the Ardnaree deposit at the NiCo
Young Project is extracted from the ASX release “NiCo Young Mineral Resource Estimate Review” dated 1 July 2025 and
available on the Company's website at https://legacyminerals.com.au/. That information was reviewed and critically
assessed by Andrew Waltho (BAppSc (Hons), FAusIMM, FAIG, RPGeo, FGS, Professional Member SME, GAICD), an
employee of ERM Australia Consultants Pty Ltd (ERM), of which Legacy Minerals Holdings Limited is a client. The Company
confirms that it is not aware of any new information or data that materially affects the information included in the original
market announcement and that all material assumptions and technical parameters underpinning the estimate continue
to apply and have not materially changed. The Company confirms that the form and context in which the Competent
Person's findings are presented have not been materially modified from the original market announcement.
Page 10 of 26
ASX: LGM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
COMPETENT PERSON'S STATEMENT - LEGACY MINERALS PORTFOLIO
The information in this announcement that relates to Exploration Targets, Exploration Results, Mineral Resources or Ore
Reserves across the broader Legacy Minerals portfolio is based on information compiled by Thomas Wall, a Competent
Person who is a Member of the Australian Institute of Geoscientists. Mr Wall is the Technical Director and a full-time
employee of Legacy Minerals Pty Limited, the Company's wholly-owned subsidiary, and a shareholder of the Company.
Mr Wall has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration
and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 edition of the Australasian
Code for Reporting of Exploration Results, Mineral Resou
Share your feedback
Discover