First Drilling Campaign at Thomson Complete
Released
Released
Announcement PDF
ASX Announcement
19 June 2025
First Drilling Campaign at Thomson Complete
Drilling intersects wide zones of quartz-sulphide veins
Successful Drill Test of First Targets
•
Legacy Minerals has completed the drilling of the F4 and Cut-B anomalies that lie within the Thomson
Project located in far north-west NSW.
•
These drill targets were defined by discrete, coincident zones of elevated magnetic and gravity data
interpreted as having potential for intrusion-related gold and copper (IRG-Cu) style mineralisation.
•
Drill core processing is underway with assays expected within 6-8 weeks.
Drilling Observations
•
Quartz and quartz-pyrrhotite-pyrite +/- sphalerite-chalcopyrite veins were intercepted at both targets
and are interpreted to be the cause of the magnetic and gravity anomalies.
•
Drilling reached top of basement at 84.2m (CBDD004) and 88.8m (F4DD001) and continued in a
variably hornfelsed and silica-carbonate altered meta-siltstone dominated package with thin, frequent
to infrequent quartz veins to end of hole (600.2m – CBDD004, 460.3m – F4DD001).
Historical Drilling Results
•
2011 diamond drilling (CUTBD02) at the Cut-B anomaly encountered 300m of alteration and elevated
gold-copper anomalism. Better results included:
o
o
1m at 6.73g/t Au from 370m, 1m at 497g/t Ag, 0.13% Nb from 392m i and,
0.7m at 0.5% Cu, 112g/t Ag, 4.2% Zn and 0.4% Sn from 411m ii.
Future Drilling Planned – Cut A Anomaly
•
•
Further government drilling approvals are underway to test adjacent historical ‘near miss’ at Cut-A.
2011 drill testing of the nearby Cut-Aii anomaly returned broad mineralised intervals, including:
o 377m at 0.1g/t Au (no cut-off) from 225m to 602m including,
o
41m at 0.4g/t Au (no cut-off) from 420m.
Discovery Opportunity
The Project shares characteristics with major IRG-Cu districts, such as the Paterson Province WA, host to
major deposits including Winu (2.8Mt Cu, 8Moz Au, 51Moz Ag)1, iii and Havieron (7Moz Au, 0.3Mt Cu) iv.
Figure 1. F4DD004: laminated quartz-pyrrhotite vein at 197m. Figure 2. CBDD004: quartz-pyrrhotite breccia at 154.5m
(See Table 2 for details on the visual estimates of mineralisation)
Cautionary Note Visual Estimates of Mineralisation: ‘Visual estimates of mineral abundance should never be
considered a proxy or substitute for laboratory analyses where concentrations or grades are the factor of
principal economic interest. Visual estimates also potentially provide no information regarding impurities or
deleterious physical properties relevant to valuations.’
1. See Endnotes on Page 22 for references
Page 1 of 22 | ABN 43 650 398 897
3/202 Russell Street Bathurst, 2795
www.legacyminerals.com.au
ASX: LGM
Page 2 of 22
Management comment Legacy Minerals CEO & Managing Director, Christopher Byrne said:
“Legacy Minerals is pleased to have achieved our objectives with the latest drilling at the Thomson
Project, which intercepted wide zones of quartz-sulphide mineralisation at both target areas. At the
Thomson Project, we benefit from a district-scale, first-mover advantage, exploring a new frontier for
mineral discovery. This drilling campaign has successfully defined new mineralisation in the first-ever
tests of these large geophysical anomalies, which have the potential to represent the geophysical
expression of significant gold-copper deposits.
Diamond drill core observations from both targets indicate that the magnetic anomalies are caused by
an increased abundance of magnetic sulphide mineralisation (pyrrhotite) associated with quartz
veining. Pyrrhotite is commonly associated with gold mineralisation in intrusion-related gold and
copper systems, including at the nearby and historically drill-tested Cut-A Anomaly.
These observations validate the team’s targeting criteria and geological interpretation of the magnetic
data, further enhancing the prospectivity of multiple untested targets across the Thomson Project.
We now await assay results, expected within six weeks. Funding and government approval are already
in place to drill follow-up holes at both the Cut-B and F4 targets, with additional approvals underway
to test further high-priority anomalies across the Project Area.”
F4 and Cut-B Anomaly Drilling
The F4 and Cut-B targets are defined by discrete, coincident zones of elevated magnetic and gravity
responses, similar to those observed at the Cut-A anomaly, and are the first targets of over a dozen large,
discrete geophysical targets that warrant testing. These features may represent IRG-Cu mineralisation. The
F4 represents a geophysical anomaly never before drill tested while the Cut-B has shown encouraging
results from first pass historical drilling.
F4 Anomaly
Cut-B Anomaly
Figure 3. Oblique views of the F4 anomaly (Left image: 6613500mN, MGA94 z54) and Cut-B anomaly (Right
image: 249750mE, MGA94 z55). 3D magnetic inversion model anomaly shells (Red >0.006 SI) and gravity
elevated modelled density shells (green >2.72) with surface showing magnetic RTP and completed drill holesi.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Figure 4. Examples of veins textures intercepted and mineralisation in the F4DD004 drill hole. See Disclaimer around visual estimates on Page 1 and Table 2 for details on the
visual estimates of mineralisation.
Page 3 of 22 | ABN 43 650 398 897
3/202 Russell Street Bathurst, 2795
www.legacyminerals.com.au
ASX: LGM
Page 4 of 22
Figure 5. Examples of veins textures intercepted and mineralisation in the CBDD004 drill hole. See Disclaimer around visual estimates on Page 1 and Table 2 for details on the
visual estimates of mineralisation.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Cut-B Anomaly
The Cut-B anomaly exhibits a coincident elevated gravity and magnetic data which indicates a close
spatial relationship between magnetic material and dense material. This target strikes east-to-west
over approximately 900m. Drilling successfully tested the modelled magnetic and gravity target with
observations and magnetic susceptibility measurements indicating that the magnetic feature has been
caused by hydrothermal pyrrhotite-bearing quartz veins.
Previous drilling at the CutBD02 Anomaly intersected approximately 300m of silica-albite +/tourmaline-biotite alteration, delivering several high-grade intervals with highlight assays includingi:
•
1m at 6.73g/t Au from 370m
•
1m at 497g/t Ag, 0.13% Nb from 392m
•
0.7m at 112g/t Ag, 0.5% Cu, 4.2% Zn and 0.4%Sn from 411m v.
Figure 6. Cut-B anomaly cross section showing 3D magnetic inversion model anomaly shells (Red >0.006 SI)
and gravity anomaly modelled density shells (green >2.78) with historic drilling and surface showing magnetic
RTP (section 249750mE, MGA94 z55)i. CBDD004 assays pending.
Page 5 of 22 | ABN 43 650 398 897
3/202 Russell Street Bathurst, 2795
www.legacyminerals.com.au
ASX: LGM
Page 6 of 22
Figure 7. Cut-B plan view showing 3D magnetic inversion model anomaly shells (Red >0.006 SI) and gravity
anomaly modelled density shells (green >2.78) with drilling and aerial imagei. CBDD004 assays pending.
Variable silica-albite-biotite altered metasediments were observed with strong to weak alteration
intensity associated with quartz veins and veinlets from 84m to end of hole in drill hole CBDD004.
Minor pyrrhotite and pyrite bearing quartz veins with rarer base metal and arsenopyrite-bearing
quartz veins were logged throughout the drill hole with zones of increased vein widths. No correlation
between veining, alteration and assay results has yet been recognised based on assay results from
CutBD02.
Historical drill hole CutBD02 delivered several significant intervals highlighting gold, silver and niobium
endowment. Better results included:
•
6m at 0.2g/t Au from 277m
•
0.5m at 0.4g/t Au, 38.3g/t Ag, 0.42% Bi and 0.2% W from 357.5m
•
1m at 6.73g/t Au from 370m
•
1m at 497g/t Ag, 0.13% Nb and 854ppm Mo from 392m
•
0.7m at 112g/t Ag, 0.5% Cu, 4.2% Zn and 0.4%Sn from 411m
F4 Anomaly
The F4 anomaly had never before been tested by drilling with Legacy Minerals the first to test this
target. Drilling successfully tested the modelled magnetic and gravity target with observations and
magnetic susceptibility measurements indicating that the magnetic feature has been caused by
hydrothermal pyrrhotite-bearing quartz veins.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 7 of 22
Figure 8. F4 anomaly cross section showing completed drill hole 3D magnetic inversion model anomaly shells
(Red >0.006 SI) and gravity anomaly modelled density shells (green >2.72) surface showing magnetic (section
6613500mE, MGA94 z540)i.
Figure 9. Plan view of the F4 magnetic anomaly shells (Red >0.006 SI) and gravity anomaly modelled density
shells (green >2.72) with completed drillhole over aerial imagei.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 8 of 22
Figure 10. Sectional view of the F4 magnetic anomaly shells (Red >0.006 SI) and gravity anomaly modelled
density shells (green >2.72) with completed drill holei. F4DD001 assays pending.
Future Drill Target – Cut-A Anomaly
The Cut-A Anomalyi
Recently reported intercepts from new assays at the anomaly include:
•
377m at 0.1g/t Au (no cut-off) from 225m to 602m including,
o
o
11m at 0.8g/t Au from 287m (no cut-off) including,
3m at 1.6g/t Au from 283m, and
1m at 3.7g/t Au from 293m
41m at 0.4g/t Au from 420m (no cut-off) including,
8m at 0.5g/t Au from 420m, and
15m at 0.7g/t Au from 446m
The Cut-A anomaly exhibits a coincident zone of elevated magnetic and gravity response that extends
over a strike length of approximately 1,000m, in an east-west direction. Previous explorers completed
a single line of induced polarisation dipole-dipole (DDIP) over the highest magnetic feature and
identified a zone of increased chargeability coincident with the elevated magnetic data. This was
followed up by a single 641.8m drill-hole. Drilling reached top of basement at 136m and continued in
approximately 480m of strong to moderate silica-carbonate altered meta-siltstone dominated
package with thin, frequent quartz veins. Quartz veins commonly contain pyrite and pyrrhotitebearing. Granodiorite was intercepted from 597m to the end-of-hole (at 641.8m) ie.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 9 of 22
Cut-A Anomaly
r
Figure 11. Cut-A anomaly cross section showing 3D magnetic inversion model anomaly shells (Red >0.0035 SI)
and gravity anomaly modelled density shells (green >2.70) with historic drilling (Section 232946mE, MGA94
z55)i. *No cut-off grade applied.
Assay results from drill core sampling delivered a broad anomalous uncut interval of 377m at 0.1g/t
Au (no cut-off) from 225m. Pathfinder elements are consistent with a reduced intrusion related gold
model where gold correlates with Bi and Te in quartz veins and As, Sn and W are variably elevated.
The target is interpreted to be open in all directions.
Better results within this broad zone include:
•
•
7m at 1.2g/t Au and 658ppm Bi from 287m (uncut) including:
o
3m at 1.6g/t Au and 935ppm Bi from 283m; and
o
1m at 3.7g/t Au and 1670ppm Bi from 293m.
41.95m at 0.4g/t Au from 420m (uncut) including:
o
8m at 0.5g/t Au from 420m including:
o
4m at 1g/t Au, 5.5g/t Ag and 940ppm Bi from 420m.
24.95m at 0.4g/t Au, 7.9g/t Ag from 437m including:
7.95m at 0.49g/t Au and 7.1g/t Ag from 446m including:
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 10 of 22
5.45m at 1.1g/t Au and 6.7g/t Ag from 448.55m.
Figure 12. Plan view of the Cut-A magnetic anomaly shells (Red >0.001 SI) and gravity anomaly modelled
density shells (green >2.69) over aerial imagei.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 11 of 22
Thomson Project – Intrusion-Related Gold and Copper
The Thomson Project is located west of Bourke and covers 5,500km2 of tenure under granted
exploration licences, securing a belt-scale exploration opportunity.
Figure 13. Overview showing regional RTP magnetics and examples of “bullseye” magnetic targets (inset).
The Thomson Project is located near the southern margin of the Thomson Orogen nearby the
interpreted contact with the Lachlan Fold Belt and the Delamerian Orogen. The Thomson Orogen
covers a large area of Queensland and north-western New South Wales, mostly under cover of the
Mesozoic Eromanga Basin.
The dominant basement rocks are interpreted to consist of Cambrian to Ordovician volcanics,
metamorphosed turbidite, siltstone, and slate that are intruded by Silurian to Devonian felsic and
mafic igneous rocks. This interpretation is supported by:
•
Several deep stratigraphic drill holes, such as Tongo 1, Laurelvale 1, completed by the NSW
Geological Survey (GSNSW) vi.
Historic drill holes completed by previous exploration companies.
The incorporation and interpretation of regional geophysical data (aeromagnetic, gravity and
seismic) conducted by the GSNSW with geology logged in drill holes.
3F5F
•
•
The Thomson Project is covered by younger sediments that ranges up to 280m thick. These sediments
are part of the Eromanga and the Surat Basin cover sequences.
Historically these sedimentary cover rocks have partly deterred previous exploration companies and
has limited the recognition of the Thomson Orogen’s mineral potential. Importantly, historical work
indicates that this cover sequence is geophysically transparent, with a number of the key geophysical
targeting methods such as magnetics and gravity, providing highly useful and important data sets.
The GSNSW has suggested that the basement rocks within the Thomson Orogen could hold similar
mineral potential to the adjoining belts, including the base metal and gold endowment of the Lachlan
Orogen to the south, which is over 80Moz gold and 13Mt copper vii. A series of major, belt-scale faults
are interpreted from regional magnetic and gravity data, which may have acted as major fluid flow
conduits during both early extensions and later deformation of the belt.
4F6F
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 12 of 22
Approved by the Board of Legacy Minerals Holdings Limited.
For more information:
Investors:
Chris Byrne
CEO & Managing Director
chris.byrne@legacyminerals.com.au
+61 (0) 499 527 547
Media:
Nicholas Read
Read Corporate
nicholas@readcorporate.com.au
+61 (0) 419 929 046
DISCLAIMER AND PREVIOUSLY REPORTED INFORMATION
Information in this announcement is extracted from reports lodged as market announcements referred to above and
available on the Company’s website https://legacyminerals.com.au/. The Company confirms that it is not aware of any new
information that materially affects the information included in the original market announcement and that all material
assumptions and technical parameters underpinning the estimates in the relevant market announcement continue to apply
and have not materially changed.
This announcement contains certain forward-looking statements. Forward looking statements are only predictions and are
subject to risks, uncertainties and assumptions which are outside of the control of Legacy Minerals Holdings Limited (LGM).
These risks, uncertainties and assumptions include commodity prices, currency fluctuations, economic and financial market
conditions, environmental risks and legislative, fiscal or regulatory developments, political risks, project delay, approvals and
cost estimates. Actual values, results or events may be materially different to those contained in this announcement. Given
these uncertainties, readers are cautioned not to place reliance on forward-looking statements. Any forward-looking
statements in this announcement reflect the views of LGM only at the date of this announcement. Subject to any continuing
obligations under applicable laws and ASX Listing Rules, LGM does not undertake any obligation to update or revise any
information or any of the forward-looking statements in this announcement to reflect changes in events, conditions or
circumstances on which any forward-looking statements is based.
COMPETENT PERSON’S STATEMENT
The information in this Report that relates to Exploration Targets, Exploration Results, Mineral Resources or Ore Reserves is
based on information compiled by Thomas Wall, a Competent Person who is a Member of the Australian Institute of
Geoscientists. Mr Wall is the Technical Director and a full-time employee of Legacy Minerals Pty Limited, the Company’s
wholly owned subsidiary, and a shareholder of the Company. Mr Wall has sufficient experience that is relevant to the style
of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent
Person as defined in the 2012 edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and
Ore Reserves. Mr Wall consents to the inclusion of the matters based on this information in the form and context in which
it appears in this announcement.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 13 of 22
About Legacy Minerals
Legacy Minerals is an ASX-listed public company that has been exploring gold, copper, and base-metal projects
in NSW since 2017. The Company has ten projects that present significant opportunities for shareholders.
Au-Ag Black Range (EL9464, EL9589)
Extensive low-sulphidation, epithermal system with
limited historical exploration. Epithermal occurrences
across 30km of strike.
Cu-Au Rockley (EL8926)
Cu-Au Drake (EL6273, EL9616, EL9727, ALA75)
Large caldera (~150km2) with similar geological
characteristics to other major pacific rim low-sulphidation
deposits.
Au-Cu (Pb-Zn) Cobar (EL9511) Helix JV
Prospective for porphyry Cu-Au and situated in the
Macquarie Arc Ordovician host rocks with historic highgrade copper mines.
Undrilled targets next door to the Peak Gold Mines and
along strike of the CSA copper mine.
Au-Ag Bauloora (EL8994, EL9464) Newmont JV
Au Harden (EL9657) Hilltops JV
One of NSW’s largest low-sulphidation, epithermal
systems with a 27km2 epithermal vein field.
Substantial historical gold production from two high-grade
and substantial orogenic systems.
Cu-Au Glenlogan (EL9614) S2 Resources JV
Au-Cu Fontenoy (EL8995) Earth AI JV
Untested porphyry search space located 55kms from
Australia’s largest porphyry complex, Cadia Valley.
A highly prospective and underexplored area for PGE, Ni,
Au and Cu mineralisation with significant drill intercepts.
Cu-Au Thomson (EL9190, EL9194, EL9728)
Ni-Co Nico Young (ELA6901)
A new and unexplored Intrusion-related gold and copper
system search space with numerous ‘bullseye’ magnetic
and gravity anomalies that remain untested.
One of the largest nickel deposits in Australia with
significant counter-cyclical exposure.
Figure 14. Location summary of Legacy Minerals’ Projects in NSW, Australia, and major mines and deposits
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 14 of 22
Appendix 1 – Thomson Drill Collar Information and Visual Estimates
Table 1: Drill hole collar information
Hole ID
Easting
Northing
F4DD001
772441
6613449
CBDD004
249848
6607165
Elevation
(m)
EOH (m)
Dip
88
460.3
-70
91
600.2
-73
Azimuth (True
North)
45
210
Table 2. Visual Estimates of mineralisation.
Hole ID
F4DD001
CBDD004
From
To
Down-hole
width
Estimated
Vein %
Estimated
Sulphide %
Preliminary Observations
(sulphide type %)
88.8
460.3
371.5
0.5
5
130
130.1
0.1
50
10
Qtz +/- po(80%)-py(20%)
vn/vlt
Qtz-po(50%)-py(50%) vn
197.6
197.7
0.1
80
10
Qtz-po(50%)-py(50%) vn
282.0
282.4
0.4
80
50
Qtz-po(100%) vn
310.3
311
0.7
70
0
Qtz vn
343.1
343.5
0.4
70
40
84.2
600.2
516
0.5
5
154.0
154.6
0.6
100
40
Qtz-po(100%) vn
Qtz +/- po(80%)-py(20%)
vn/vlt
Qtz-po(100%) vn
167.5
167.8
0.3
50
30
Qtz-po(50%)-py(50%) vn
169.6
169.7
0.1
40
0
276.0
276.5
0.5
80
50
431.6
431.7
0.1
40
50
Qtz-crb bx
Qtz-po(90%)-py(9%)-cpy(Tr%)
bx
Qtz-po(90%)-py(10%) vn
558
558.3
0.3
50
100
Po(90%)-py(10%) vn
Observation codes: qtz – quartz, crb – carbonate, sph – sphalerite, cpy – chalcopyrite, po – pyrrhotite, py –
pyrite, Tr – trace, vn – vein, vlt – veinlet, bx – breccia.
Appendix 2 – JORC Code, 2021 Edition Table 1
Section 1 Sampling Techniques and Data
Criteria
JORC Code Explanation
Commentary
Nature and quality of sampling (e.g., cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc).
These examples should not be taken as limiting the
broad meaning of sampling.
Mud-rotary drilling was completed to fresh
rock followed by NQ core (diameter: 45mm)
to end of hole (EOH). LGM used a reputable
drilling contractor, Ophir Drilling, with a
suitable rig. Diamond drill core provide a
high-quality sample that is logged for
lithological, structural, geotechnical, and
other attributes. Sub-sampling of the core is
carried out as per industry best practice.
Downhole surveys of dip and azimuth are
conducted every 30m using a downhole
Gyro to detect deviations of the hole from
the planned dip and azimuth. The drill‐hole
collar locations are recorded using a hand‐
held GPS, which has an accuracy of +/‐ 5m.
All drill‐hole collars may be surveyed to a
greater degree of accuracy using a certified
surveyor at a later date.
Sampling
Techniques
Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 15 of 22
Aspects of the determination of mineralisation
that are Material to the Public Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple (e.g.
‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce
a 30 g charge for fire assay’). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g.,
submarine nodules) may warrant disclosure of
detailed information.
Drilling
techniques
Drill type (e.g., core, reverse circulation, open‐hole
hammer, rotary air blast, auger, Bangka, sonic, etc)
An Olympus Vanta pXRF is used to spot
analyse the drill core onsite. Readings are
taken to help identify minerals and
alteration with field calibration of the pXRF
instrument using standards periodically
performed.
The handheld pXRF results are only used for
preliminary assessment of element
compositions, prior to the receipt of assay
results from the certified laboratory.
The drill core was orientated using suitable
core orientation tool by the drilling
contractor with LGM staff supervision.
These orientations are extended onto the
remainder of the core and meter marks for
logging. The visible structural features
(veins, bedding, foliation, faults) are
measured against the core orientation
marks.
The drill core processing is underway to be
cut in half, and assayed at a certified assay
laboratory, ALS Laboratories. Core is
prepared for analysis by cutting along the
longitudinal line and then samples are
numbered as per the pre-designed cutsheet. The core is selectively sampled down
the drill string at 1m nominal intervals
across the mineralised zones, unless
selected geological or mineralisation
boundaries. A certified sample standard is
inserted a minimum 1:50 samples.
Standards may also be added according to
geology.
Where core was incompetent due to being
transported cover or weathered rock,
representative samples were collected along
the axis of the core.
The drill core is being cut by LGM staff.
Samples are being transported to ALS
Laboratory in Orange for assaying. Samples
are crushed to 6mm and then pulverized to
85% passing 75 microns. A 50g split of the
sample was fired assayed for gold. The
lower detection limit for gold is 0.002 ppm,
which is believed to be an appropriate
detection level. All other elements including
copper and base metals (total 47 element
suite) are analysed using a 4-acid acid digest
and an ICP finish (ALS code: ME-MS61 + AuAA21).
Assay standards, blanks and duplicates were
analysed as part of the standard laboratory
analytical procedures. Company standards
were introduced into the sampling at a ratio
minimum of 1 standard for every 50
samples.
Sample length: Core is sampled in 0.2m to
2m sample interval lengths except for minor
changes due to geological or mineralisation
boundaries. Pulps are retained by LGM for
potential follow-up analysis.
Diamond drilling using industry standard
techniques. Mud rotary to refusal
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 16 of 22
and details (e.g., core diametre, triple or standard
tube, depth of diamond tails, facesampling bit or
other type, whether core is oriented and if so, by
what method, etc).
Method of recording and assessing core and
chip sample recoveries and results assessed.
Drill sample
recovery
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
Whether core and chip samples have been
geologically and geotechnically logged to a level of
detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
Logging
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
Sub‐sampling
techniques and
sample
preparation
If core, whether cut or sawn and whether quarter,
half or all core taken.
If non‐core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
(commonly fresh rock) and NQ3 (45mm) to
end of hole (EOH).
Core recoveries were recorded during
drilling and reconciled during the core
processing and geological logging.
Core is measured and marked after each
drill run using wooden blocks calibrating
depth.
To date, minimal sample recovery issues
have been identified that would impact on
potential sample bias in the competent
fresh rocks that host the mineralised
intervals.
Systematic geological and geotechnical
logging was undertaken. Data collection
where appropriate includes:
• Nature and extent of lithologies.
• Relationship between lithologies.
• Amount and mode of occurrence of ore
minerals.
• Location, extent and nature of structures
such as bedding, cleavage, veins, faults etc.
Structural data (alpha & beta) are recorded
for orientated core.
• Geotechnical data is collected as required
including recovery, RQD, fracture frequency,
qualitative IRS, microfractures, veinlets and
number of defect sets. For some
geotechnical holes the orientation, nature of
defects and defect fill may be recorded.
• Representative bulk density by
Archimedes principle may be taken.
• Magnetic susceptibility recorded at 1m
intervals for some holes as an orientation
and alteration characterisation tool.
Logging records lithology, mineralogy,
mineralisation, veins, structures,
weathering, colour and other noticeable
features. This is generally qualitative except
for % of sulphides and vein mineral content.
Core trays are photographed in wet form.
All drill holes are geologically logged in full.
Core is being cut using a conventional
automatic core saw with core holding
support. All samples are collected from the
same side of drill core where possible.
A half-core sample is submitted for assay
analysis. Where core was incompetent due
to being transported cover, weathered rock,
or soft rock due to faulting, representative
samples were collected along the axis of the
core. This information is recorded in the cutsheet and loaded into database.
Not applicable as results are for core drilling.
Drill core is cut in half along the length and
the total half core submitted as the sample.
This procedure meets industry standards
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 17 of 22
Quality control procedures adopted for all
subsampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in-situ material collected,
including for instance results for field
duplicate/second‐half sampling.
Whether sample sizes are appropriate to the
grain size of the material being sampled.
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or total.
Quality of
assay data and
laboratory
tests
where approximately 50% of the total
sample taken from the diamond core is
submitted. All mineralised intervals and
surrounding wall rock were submitted for
assay. Sample weights are recorded by the
lab.
Samples are delivered by Legacy Minerals
Holdings personnel to ALS Minerals
Laboratory, Orange NSW. Sample
preparation will comprise of an industry
standard of drying, jaw crushing and
pulverising to -75 microns (85% passing)
(ALS code PUL-23). Pulverisers are washed
with QAQC tests undertaken (PUL-QC).
Samples are dried, crushed and pulverized
to produce a homogenous representative
sub‐sample for analysis.
Quality control procedures include
submission of Certified Reference Materials
(standards) and duplicates with each sample
batch. QAQC results are routinely reviewed
to identify and resolve any issues.
All sub-sampling of the prepared core is
completed by the laboratory.
The remaining half-core is stored and allows
assay values to be viewed against the
geology; and, where required, further
samples may be submitted for quality
assurance. Qua
Share your feedback
Discover