Exploration Ramp up at Bauloora Epithermal Gold Project
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
19 OCT 2022
EXPLORATION RAMP UP AT THE BAULOORA GOLD PROJECT
LGM to focus on NSW’s largest under-explored low-sulphidation epithermal system
Legacy Minerals Holdings Limited (ASX: LGM, “LGM”, “the Company” or “Legacy Minerals”) is pleased
to announce the commencement of an accelerated exploration program at the Company’s 100%
owned Bauloora Epithermal Gold Project (Bauloora). The systematic exploration work completed by
the Company to date has provided increased confidence that the scale and character of mineralisation
at Bauloora is akin to those of other pre-discovery observations noted at major epithermal mines
including Pajingo and Cracow in Queensland; and Esquel and Cerro Negro in Argentina.
Management Comment
Legacy Minerals Managing Director, Christopher Byrne said:
“The strength of the Legacy Minerals’ Lachlan Fold Belt portfolio continues to impress as significant
discovery opportunities develop across all projects. As such, it is with great excitement that the Board
and Management have determined that the potential presented at the Bauloora Project for a
significant gold discovery requires the Company’s full focus.
After extensive work on the ground, the project is now considered by the Company to be the largest
under-explored low-sulphidation epithermal gold-silver system in NSW and our team believes the
Project will continue to deliver highly compelling drill targets with the potential for a major gold
discovery. Consequently, we have taken measures to align our exploration focus both in funding and
personnel to commence an accelerated program at Bauloora, focused initially on drill target definition
and drilling within the known 14km2 anomalous “gold zone”.
Systematic work programs at Rockley, Cobar and Harden will continue in line with the Company’s
strategy to progress these towards compelling drill targets, also drilling is expected to commence at
Fontenoy and Mulholland in early 2023 through our strategic alliance partner Earth AI.
It is a very exciting time for Legacy Minerals, and we look forward to updating our shareholders on
work and results pending at Bauloora and our other projects as they develop.”
Highlight – Accelerated work program at Bauloora
Results and interpretation pending
Major soil geochemical program complete (2,464 samples) - assays pending
Reconnaissance rock chip program complete (1,013 samples) - assays pending
Regional Advanced Spaceborne Thermal Emission and Reflection (ASTER) data
acquisition (remote sensing to determine anomalies) - interpretation
• Petrology studies (study of the origin and composition of rocks) – interpretation
Activities Underway
•
•
•
• Drill pad and track access assessment and preparation
Drilling Planned
•
•
Q4 2022: Phase 1 Mee Mar Prospect ~6 holes average depth of 150m
Q1-Q3 Phase 2 – Follow up drilling
LEGACY
MINERALS
Page 1 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
Bauloora - Primed for a major discovery
Scale and grades with exceptional metallurgy in a strategic location
The Bauloora Epithermal Gold Project is now considered by Legacy Minerals to be the largest
under-explored low-sulphidation epithermal systems in NSW. The Project provides the
Company with district scale control and exposure to a major gold and silver discovery. The
Company has taken a systematic approach to exploration over the project area and have
progressively uncovered a system of significant scale and an extensive vein field with localised
very-high grade gold and silver rock chip samples. Geochemical and geological mapping
suggests that the system has been well preserved from erosion.
Colloform-crustiform banding and brecciation are common textures of low sulphidation
epithermal systems and are present at Bauloora (Figure 1). They are important indicators of
the hydrothermal activity and exposure level within a mineral system and are observed in
sample’s 5867 and 5868 taken at the Gravel Scrapes Prospect.
Figure 1: The Bauloora Epithermal Gold Project Rock Library showing an extensive catalogue of surface
rock samples obtained and logged during the systematic mapping of the vein field1. Surface rock
samples 5867 and 5868 show well developed quartz (white-very dark grey)-chalcedony (grey/white)adularia (yellow-orange) colloform-crustiform banding and breccia with 0 - 5 trace % sulphides
estimated 1, and assays pending.
1
In addition to sulphide estimates, previous observations by the Company have identified visible gold/silver in
the presence of electrum. Estimation of gold and silver grade is highly variable in these systems and as such
visual estimation can only reliably be conducted on sulphide content.
LEGACY
MINERALS
Page 2 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
Situated in a world class province and district scale
•
•
•
•
330km2 license area hosted within the world class Lachlan Fold Belt and 100km from
the Cowal Gold mine (ASX: EVN)
42km2 zone of mapped hydrothermal alteration
27km2 mapped low sulphidation epithermal vein field
14km2 geochemically anomalous “gold zone” defined by > 0.1g/t Au in surface rock
chip samples
Untested potential
•
•
Previously unrecognized and untested prospectivity (review of historical exploration)
o 1 drill hole every 75ha across gold zone
Drilling focused on the Mt Felstead Prospect leaving high priority targets undrilled
High-grade gold and silver results in drilling and surface sampling
•
•
Recent and historic drilling includes:
o 9m at 8.4g/t Au Eq. 2 from 145m
o 3m at 7.1g/t Au Eq.2 from 149m
o 3m at 5.8g/t Au Eq.2 from 69m
Rock chips up to 39.1g/t Au and 464g/t Ag
Epithermal system preservation
•
The presence of anomalous pathfinder geochemistry (up to 39.1ppm Hg, 627ppm As
and 1,810ppm Sb), epithermal vein textures and sinter related lithologies strongly
suggest preservation of the low sulphidation epithermal system.
Strategic location and low risk jurisdiction
•
Project is located nearby operating mines (60kms from Cowal Mine, ASX:EVN),
excellent access to sealed roads, power, water, rail corridors and skilled workforces
Exceptional Metallurgical Recoveries at Mt Felstead
•
Initial metallurgical testwork, using a relatively simple flotation process, has
demonstrated exceptionally high recoveries for gold, silver, copper, lead and zinc
o Up to 99.6% silver, 93.6% gold, 99.1% copper, 98.9% lead, and 99.2% zinc
Focus of upcoming work programs
• Phase 1 diamond drilling planned at Mee Mar Prospect to occur this year
• Large scale geochemistry program nearing completion
• ASTER Data acquisition and interpretation underway
2
Bauloora gold reported equivalents are based on assumptions: AuEq(g/t)= Ag(g/t)+49*Zn(%)+32*Pb(%) and ZnEq(%)=
Zn(%)+0.021*Ag(g/t)+0.648*Pb(%) calculated from 31 August 2022 spot prices of US$1,710/oz gold, US$18.88/oz silver, US$3,540/t zinc,
US$7,719/t copper, US$1,949/t lead and metallurgical recoveries of 88.3% gold, 96.9% silver, 97.4%, zinc, 94.6% copper, and 95.5% lead
which is 3rd stage rougher concentration stage average recoveries in test work commissioned by LGM and reported in the ASX
announcement dated 4 July 2022 titled “Exceptional Gold-Silver-Lead-Zinc Recoveries at Bauloora”. It is LGM’s opinion that all the elements
included in the metal equivalents calculation have a reasonable potential to be recovered and sold.
LEGACY
MINERALS
Page 3 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
Potential Bauloora system scale based on analogous epithermal systems
A key component to Legacy Minerals’ decision to focus its exploration efforts on Bauloora is
the potential scale and grade highlighted by systematic exploration and comparison with
analogous systems (Figure 3). Exploration at Bauloora has identified a low-sulphidation vein
field with similar mineralogical characteristics and geographical scale to multi-million oz gold
vein fields both within Australia and elsewhere in the world 3.
Figure 2: Diagram of Bauloora Project scale in relation to significant low-sulphidation epithermal
vein fields 4,5,6,7
3
4
Company’s Prospectus dated 28 July 2021 lodged 9 September 2021 (ASX: LGM)
Vidal, Conrado Permuy, et al. "The Marianas-San Marcos vein system: characteristics of a shallow low sulfidation epithermal Au–Ag deposit
in the Cerro Negro district, Deseado Massif, Patagonia, Argentina." Mineralium Deposita 51.6 (2016): 725-748.
5
Dale Sims, 2008, “The Gosowong Gold Field; 5Moz Au and still growing!” https://smedg.org.au/wp-content/uploads/2018/06/TLS-DaleSims.pdf
6
Howard, Ned, et al. 2015 "Multi-element Geochemistry and Hydrothermal Alteration at the Pajingo Low Sulfidation Epithermal Gold
Deposit.”
7
Minera Andes Inc. "Technical report on the San José silver-gold mine Santa Cruz, Argentina." (2010).
LEGACY
MINERALS
Page 4 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
Value Creation
Legacy Minerals holds over 1,582km2 of exploration licenses in the world-class Lachlan Fold
Belt of NSW. While all these assets represent significant discovery opportunities, the
Company considers that the Bauloora Project currently presents the most compelling value
creation opportunity for its shareholders. Therefore, Legacy Minerals has commenced a
focused exploration approach to the Bauloora project to expedite the discovery process. Drill
target generation in the broader Bauloora district will be achieved through systematic
exploration to uncover the full potential and prospectivity of the project. The targets will then
to be prioritised against existing opportunities and followed up by focused geophysics or
scout drilling program.
•
•
•
•
Exploration to date has returned exception early-stage assay results
Limited drilling across the tenement
Numerous untested targets and at surface prospect discoveries
Strong vertical zonation of these systems gives confidence to depth extent of the highgrade gold results seen at surface
Systematic Exploration Methodology
Legacy Minerals’ exploration strategy across the Bauloora tenement has transitioned from a
prospect-based approach, which provided confidence that a significant mineralised system is
present, to assessing the broader epithermal gold-silver mineralisation footprint. Working on
a macro scale has resulted in the Company identifying numerous new targets and allows for
a more effective target ranking process to improve the probability of exploration success.
TARGET
SCALE
SYSTEMATIC EXPLORATION
Bauloora tenement size
330km2
Ongoing regional exploration to expand
Hydrothermal alteration
zone
target pipeline
42km2
Vein field
27km2
Gold Zone
14km2
mineralised trends
Vein trend strike
~2km
Geochemical testing vectors to
Mineralised shoots
150m x 150m
Discovery of several mineralised shoots
LEGACY
MINERALS
Geochemical testing of all priority
mineralised shoots
Page 5 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
Bauloora Exploration Targets
The Bauloora Epithermal Gold Project contains an anomalous 14km2 “gold zone” defined as
an area of rock chip samples that have graded >0.5g/t Au (and up to 39.1g/t Au). This “gold
zone” lies within a large area of hydrothermal alteration that is defined by argillic to phyllic
alteration, silicification and contains common low sulphidation epithermal textured vein
trends. The company has identified the following prospects and exploration targets for
priority follow up and drill testing.
Figure 3: Bauloora epithermal project and priority exploration areas
LEGACY
MINERALS
Page 6 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
Regional Setting in the Lachlan Fold Belt
The Bauloora Epithermal Gold Project is located in the Central Lachlan Fold Belt NSW, which
is host to world-class copper-gold orebodies including the Cadia-Ridgeway, Northparkes, and
Cowal Mines. It is in a zone which is bounded to the west by the Gilmore Fault Zone and to
the east by the Cootamundra Fault. Bauloora contains structural remnants of Early Silurian
dominantly dacitic volcanic rocks and related granites, Siluro-Devonian sediments and felsic
volcanic rocks deposited on a basement of Late Ordovician turbidites, Late Ordovician to Early
Silurian intermediate volcanic rocks and related intrusions and sedimentary rocks.
Figure 4: Regional setting of the Bauloora Epithermal Gold Project
LEGACY
MINERALS
Page 7 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
Planned Exploration Activities
The Company will be undertaking the following planned exploration activities later this year:
• Phase 1 diamond drilling at Mee Mar Prospect
o Minimum of 900m diamond drilling (estimated 6 holes at an average depth of
150m)
• Completion of large-scale soil sampling campaign
• Reconnaissance rock chip sampling campaign
In parallel to the planned drilling:
• ASTER Data acquisition and interpretation
• Vein field mapping and regional reconnaissance
• Independent Technical Review - Engagement of Cobre Nuevo Consulting Pty Ltd (CNE)
to complete a third-party report on the exploration potential and targeting strategy
at Bauloora. CNE was formed in 2019 by Rod Davies, Mike Rennison and David Burt
who were key members of the exploration team that discovered the giant Onto CuAu deposit in Indonesia in 2014 (1.1Bt 0.96% Cu and 0.58 g/t Au and a total Inferred
mineral resource of approximately 1.0Bt @ 0.7% Cu and 0.4 g/t Au) 8
Plan for Legacy Minerals Wider Portfolio
Across the Company’s five other projects, generative work will continue be conducted in line
with the Company’s strategy to progress the projects towards compelling drill targets.
•
•
•
•
Rockley – ASTER data interpretation report
Cobar – Phase one soil sampling and ground magnetics
Harden – Targeting review and assessment
At Fontenoy and Mulholland, strategic Alliance partner Earth-AI are expected to
commence field campaigns in Q4, with drilling planned to commence early in 2023
LEGACY MINERALS INTERACTIVE INVESTOR HUB
Engage with us directly by asking questions, watching video summaries, and seeing what other
shareholders have to say about this and past announcements at our Investor Hub
https://investorhub.legacyminerals.com.au/
8
Sumbawa Timur Ming https://sumbawatimurmining.co.id/press-release-resource-estimate-of-the-ontodeposit-increases-to-over-2-billion-tonnes/
LEGACY
MINERALS
Page 8 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
Approved by the Board of Legacy Minerals Holdings Limited.
For more information:
Chris Byrne
CEO & Managing Director
chris.byrne@legacyminerals.com.au
+61 (0) 499 527 547
Victoria Humphries
Media & Investor Relations
victoria@nwrcommunications.com.au
+61 (0) 431 151 676
DISCLAIMER AND PREVIOUSLY REPORTED INFORMATION
Information in this announcement is extracted from reports lodged as market announcements referred to above
and available on the Company’s website https://legacyminerals.com.au/. The Company confirms that it is not
aware of any new information that materially affects the information included in the original market
announcement and that all material assumptions and technical parameters underpinning the estimates in the
relevant market announcement continue to apply and have not materially changed.
This announcement contains certain forward-looking statements. Forward looking statements are only
predictions and are subject to risks, uncertainties and assumptions which are outside of the control of Legacy
Minerals Holdings Limited (LGM). These risks, uncertainties and assumptions include commodity prices,
currency fluctuations, economic and financial market conditions, environmental risks and legislative, fiscal or
regulatory developments, political risks, project delay, approvals and cost estimates. Actual values, results or
events may be materially different to those contained in this announcement. Given these uncertainties, readers
are cautioned not to place reliance on forward-looking statements. Any forward-looking statements in this
announcement reflect the views of LGM only at the date of this announcement. Subject to any continuing
obligations under applicable laws and ASX Listing Rules, LGM does not undertake any obligation to update or
revise any information or any of the forward-looking statements in this announcement to reflect changes in
events, conditions or circumstances on which any forward-looking statements is based.
COMPETENT PERSON’S STATEMENT
The information in this report that relates to Exploration Targets, Exploration Results, Mineral Resources or Ore
Reserves is based on information compiled by Thomas Wall, a Competent Person who is a Member of the
Australian Institute of Geoscientists. Mr Wall is the Technical Director and a full-time employee of Legacy
Minerals Pty Limited, the Company’s wholly owned subsidiary, and a shareholder of the Company. Mr Wall has
sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and
to the activity being undertaken to qualify as a Competent Person as defined in the 2012 edition of the
Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Wall consents
to the inclusion in the report of the matters based on his information in the form and context in which it appears
in this announcement.
REFERENCED DOCUMENTS
Company’s Prospectus dated 28 July 2021 lodged 9 September 2021 (ASX: LGM)
LGM: ASX 17AUG22 New High-Grade Gold Assays Expand Bauloora Gold System
LGM: ASX 16JUN22 High-Grade Silver, Gold Drill Results, Met-Testing Underway
LGM: ASX 13SEP22 LGM Company Presentation - NWR Explorers Conference
LGM: ASX 4JUL22 Exceptional Gold-Silver-Lead-Zinc Recoveries at Bauloora
Vidal, Conrado Permuy, et al. "The Marianas-San Marcos vein system: characteristics of a shallow low sulfidation
epithermal Au–Ag deposit in the Cerro Negro district, Deseado Massif, Patagonia, Argentina." Mineralium
Deposita 51.6 (2016): 725-748.
Minera Andes Inc. "Technical report on the San José silver-gold mine Santa Cruz, Argentina." (2010).
Dale Sims, 2008, “The Gosowong Gold Field; 5Moz Au and still growing!” https://smedg.org.au/wpcontent/uploads/2018/06/TLS-Dale-Sims.pdf
Howard, Ned, et al. 2015 "Multi-element Geochemistry and Hydrothermal Alteration at the Pajingo Low
Sulfidation Epithermal Gold Deposit.”
1 Minera Andes Inc. "Technical report on the San José silver-gold mine Santa Cruz, Argentina." (2010).
Sumbawa Timur Ming https://sumbawatimurmining.co.id/press-release-resource-estimate-of-the-ontodeposit-increases-to-over-2-billion-tonnes/
LEGACY
MINERALS
Page 9 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
About Legacy Minerals
Legacy Minerals is an ASX listed public company that has been involved in the acquisition and
exploration of gold, copper, and base-metal projects in the Lachlan Fold Belt since 2017. The
Company has six wholly owned and unencumbered tenements that present significant
discovery opportunities for shareholders.
Au-Cu (Pb-Zn) Cobar (EL8709, EL9256)
Au Harden (EL8809, EL9257)
Undrilled targets next door to the Peak Gold Mines
with several priority geophysical anomalies Late
time AEM conductors, IP anomaly, and magnetic
targets Geochemically anomalous - gold in lag up to
1.55g/t Au.
Large historical high-grade quartz-vein gold
mineralisation open along strike and down plunge.
Significant drill intercepts include 3.6m at 21.7g/t
Au 116m and 2m at 17.17g/t Au from 111m.
Au-Ag Bauloora (EL8994, EL9464)
2
A 27km hydrothermal alteration area containing
low-sulphidation epithermal-style gold silver targets.
Historical bonanza grades at the Mt Felstead
Prospect included face sampling up to 3,701g/t Ag,
6.9g/t Au, 29% Pb, 26% Zn, and 6.4% Cu.
Au-Cu Fontenoy (EL8995) EARTH AI-Alliance
The Project exhibits a greater than 8km long zone of
Au and Cu anomalism defined in soil sampling and
drilling. Significant drill intercepts include 79m at
0.27% Cu from 1.5m with numerous untested
anomalies along the 8km strike length.
Cu-Au Rockley (EL8296)
Sn-Ni-Cu Mulholland (EL9330) EARTH AI-Alliance
Prospective for porphyry Cu-Au and situated in the
Macquarie Arc Ordovician host rocks the Project
contains historic high-grade copper mines that
graded up to 23% Cu.
Associated polymetallic mineralisation. There are
several tin and nickel occurrences in the Project
area with trends up to 2.6km defined in drilling.
Significant drill intercepts include 44m at 0.45% Ni.
Figure 5: Legacy Minerals Tenements, NSW, Australia
LEGACY
MINERALS
Page 10 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
Appendix 2 – JORC Code, 2021 Edition Table 1
Section 1 Sampling Techniques and Data
Criteria
Sampling
Techniques
Drilling
techniques
Drill sample
recovery
Logging
Sub‐sampling
techniques and
sample
JORC Code Explanation
Commentary
Nature and quality of sampling (e.g., cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc).
These examples should not be taken as limiting the
broad meaning of sampling.
Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or
systems used.
Rock Chip Samples
Rock chip and grab samples were taken from numerous
locations throughout the project area.
Aspects of the determination of mineralisation
that are Material to the Public Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple (e.g.
‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such
as where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (e.g., submarine nodules)
may warrant disclosure of detailed information.
Drill type (e.g., core, reverse circulation, open‐hole
hammer, rotary air blast, auger, Bangka, sonic,
etc) and details (e.g., core diametre, triple or
standard tube, depth of diamond tails,
facesampling
bit or other type, whether core is
oriented and if so, by what method, etc).
Method of recording and assessing core and
chip sample recoveries and results assessed.
Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias
may have occurred due to preferential loss/gain
of fine/coarse material.
Rock Chip Samples
Samples weighing up to several kilograms were taken.
Whether core and chip samples have been
geologically and geotechnically logged to a level
of detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc)
photography.
Geological logging is carried out on all rock chips with
lithology, alteration, mineralisation, structure and veining
recorded.
The total length and percentage of the relevant
intersections logged.
If core, whether cut or sawn and whether quarter,
half or all core taken.
If non‐core, whether riffled, tube sampled,
Not Applicable. No drilling conducted.
LEGACY
MINERALS
Rock Chip Samples
The purpose of the rock chip samples was to establish the
tenor of any mineralisation visible in outcrop and float.
Therefore, the samples are biased towards mineralised
samples. This is appropriate for this type of work.
Not Applicable. No drilling conducted.
Not Applicable. No drilling conducted.
Not Applicable. No drilling conducted.
Not Applicable. No drilling conducted.
Logging of rock chips records lithology, mineralogy,
mineralisation, structures, weathering, colour, texture and
other noticeable features. Rock chips are occasionally
photographed for reference.
Not Applicable. No drilling conducted.
Not Applicable. No drilling conducted.
Page 11 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
preparation
rotary split, etc and whether sampled wet or
dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Quality control procedures adopted for all
subsampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in-situ material collected,
including for instance results for field
duplicate/second‐half sampling.
Whether sample sizes are appropriate to the
grain size of the material being sampled.
Quality of
assay data and
laboratory
tests
Verification of
sampling and
assaying
Location of
data points
Data spacing
and
distribution
Samples were delivered by Legacy Minerals Holdings
personnel to ALS Minerals Laboratory, Orange NSW. Sample
preparation will comprise of an industry standard of drying,
jaw crushing and pulverising to -75 microns (85% passing)
(ALS code PUL-23). Pulverisers are washed with QAQC tests
undertaken (PUL-QC). Samples are dried, crushed and
pulverized to produce a homogenous representative sub‐
sample for analysis.
Laboratory QC procedures for rock sample assays involve
the use of internal certified reference material as assay
standards, along with blanks and duplicates.
Not appropriate for this stage of exploration.
The size of samples for the rock chips is appropriate for this
stage of exploration.
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
All samples were analysed by ALS Global.
For geophysical tools, spectrometres, handheld
XRF instruments, etc, the parametres used in
determining the analysis including instrument
make and model, reading times, calibrations
factors applied and their derivation, etc.
Nature of quality control procedures adopted
(e.g., standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (i.e., lack of bias) and precision
have been established.
The verification of significant intersections by
either independent or alternative company
personnel.
Not Applicable. No geophysical tools used.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Not Applicable.
Primary assay data is captured using Datashed software and
includes geological logging, sample data and QA/QC
information. This data, together with the assay data, is
stored both locally and entered into LGM online database.
All historical data has been entered digitally by previous
explorers and verified internally by LGM.
Discuss any adjustment to assay data.
No significant adjustments have been required.
Accuracy and quality of surveys used to locate
drill holes (collar and down‐hole surveys),
trenches, mine workings and other locations
used in Mineral Resource estimation.
Specification of the grid system used.
Samples were located with a handheld GPS.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration
Results.
Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the
Mineral Resource and Ore Reserve estimation
Not Applicable.
Rock chip spacing is applicable to the reconnaissance nature
of the work.
No mineral resource or reserve calculation has been applied
LEGACY
MINERALS
Gold is determined using a 50g charge. The resultant prill is
dissolved in aqua regia with gold determined by flame AAS.
48 elements by four acid digest (Method ME-MS61).
Quality control procedures for assays were followed via
internal laboratory protocols. Accuracy and precision are
within acceptable limits.
Significant assays have not been verified by independent or
alternative companies. This is not required at this stage of
exploration.
The grid system used for maps is GDA94, MGA Zone 55.
Page 12 of 15 | ABN 43 650 398 897
Level 7, 1 Margaret Street Sydney
www.legacyminerals.com.au
ASX: LGM
Orientation of
data in relation
to geological
structure
Sample
security
procedure(s) and classifications applied. Whether
sample compositing has been applied.
Whether sample compositing has been applied.
Whether the orientation of sampling achieves
unbiased sampling of possible structures and
the extent to which this is known, considering
the deposit type.
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
The measures taken to ensure sample security.
No compositing has been applied to the exploration results.
Not Applicable. No drilling.
Not Applicable. No drilling.
All samples are bagged into tied calico bags, before being
grouped into polyweave bags and transported to ALS
Minerals Laboratory in Orange by Legacy Minerals
personnel. All sample submissions are documented via ALS
tracking system with results reported via email.
Sample pulps are returned to site and stored for an
appropriate length of time.
Audits or
reviews
The results of any audits or reviews of sampling
techniques and data.
The Company has in place protocols to ensure data security.
This is not material for these Exploration Results.
Section 2 Reporting of Exploration Results
(Criteria in this section apply to all succeeding section)
Criteria
Mineral
Tenement and
Land Status
Exploration
Done by Other
Parties
Geology
Drill hole
Information
JORC Code Explana
Share your feedback
Discover