Drilling Assays Confirm New Epithermal Discovery at Bauloora
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
10 MAY 2023
Assays Confirm New Epithermal Discovery at Bauloora
Initial diamond drill assay results confirm high-grade mineralisation and the potential for a large,
low-sulphidation epithermal deposit at Bauloora.
New Prospect Discovery – ‘Bluecap’
•
13m at 4.53g/t AuEq incl. 6m at 8.00g/t AuEq from 57m
o 13m at 1.66g/t Au, 6.68g/t Ag, 0.14% Cu and 4.23% Pb+Zn incl.
o 6m at 3.56g/t Au, 10.95g/t Ag, 0.22% Cu and 6.47% Pb+Zn
Mee Mar drilling highlights:
•
3.8m at 3.91g/t AuEq from 179.6m (MM002)
o 3.8m at 0.93g/t Au, 6.60g/t Ag, 0.28% Cu and 4.17% Pb+Zn
•
9m at 2.07g/t AuEq from 79m (MM004)
o 9m at 0.16g/t Au, 5.0g/t Ag, 0.07%Cu and 1.75% Pb+Zn
High-grade mineralisation likely to extend at depth
•
Drill holes report strongly elevated in Sb (up to 216ppm) and Hg (up to 125ppm) values which
support textural observations and interpretation that drill holes have only tested the upper levels
of the epithermal vein system.
•
These assays and textural observations strongly support deeper drilling, targeting high-grade gold
mineralisation in the interpreted crustiform-colloform superzone (Boiling zone).
Newmont to fund further drilling through Joint Venture agreement i
•
Legacy Minerals and Newmont Exploration, a subsidiary of Newmont Corporation, have entered
a A$15 million farm-in and joint venture agreement across Bauloora to fund further drilling.
•
Newmont has extensive experience in the discovery and development of epithermal systems
including at its formerly owned Pajingo (4.5Moz Au) ii and Cerro Negro, Argentina (7.1Moz) iii.
Figure 1: Hole MM008 and MM001 showing low sulphidation epithermal textured veins (chalcedony-quartz-carbonate)
and breccia (galena-sphalerite-hematite). Quartz and chalcedony is white to dark grey and rarely purple in colour, adularia
is orange to salmon pink, hematite is red, sphalerite may be white, light green to yellow and galena is silver to grey in
colour.
Page 1 of 18 | ABN 43 650 398 897
3/203 Russel Street Bathurst, 2795
www.legacyminerals.com.au
ASX: LGM
Page 2 of 18
Legacy Minerals Holdings Limited (ASX: LGM, “LGM”, “the Company” or “Legacy Minerals”) is
pleased to release assays from diamond drill core completed at its Bauloora Epithermal Gold Project.
Bluecap Prospect
Figure 2: Bluecap Prospect MM008 Drill hole cross section (left) and interpreted boiling zone and geological
model iv (right) with rock chip and core textures.
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 3 of 18
Management comment - Legacy Minerals CEO & Managing Director, Christopher Byrne said:
“The Bauloora project continues to deliver exceptional results. The goal of the Mee Mar Prospect
drilling was to understand the system level, the strike continuity, and to discover a high-grade shoot
within the veins strike. It exceeded our expectations with the consistent interception of high-level
quartz textures and epithermal mineralisation as well as three potential shoots in the vein strike, two
in Mee Mar and a new discovery at ‘Bluecap’.
The drilling returned wide mineralised intervals up to 13m downhole width, across a 1.4km strike and
is open to the north, south and at depth. The results support the theory that a lot more gold could be
found at depth as we vector our targeting in on the crustiform-colloform ‘boiling zones’ along the vein
trend.
With the recent joint venture agreement, Newmont’s global expertise will assist in rapidly advancing
our exploration at Bauloora and Legacy Minerals looks forward to updating the market with the next
stages of the exploration program in the coming weeks.”
Diamond Drilling Assays
Exploration at Legacy Minerals’ Bauloora Project, located in New South Wales, has returned highgrade gold, zinc and lead assay results. Diamond drilling focused on the Mee Mar Prospect where rock
chip samples have returned elevated gold and silver over an extensive 2km strike. The Mee Mar
Prospect is the first of several high priority target areas to be tested with diamond cored drilling at the
Bauloora Project. These assay results support the interpretation based on quartz textural observations
that the drill holes have tested the Mee Mar vein within the upper levels of the epithermal system
which were represented by quartz textures of the chalcedony superzone and possibly into the upper
crustiform-colloform superzone. This is greatly encouraging given the significant mineralisation that’s
been intercepted in these interpreted higher levels. Furthermore, drill holes MM008, MM002 and
MM004 may have intercepted the top of potentially high-grade mineralised shoots that remain open
at depth.
Ten diamond-cored drill holes were completed for a total of 1,649.6m testing the 2km-long gold-silver
bearing low sulphidation epithermal Mee Mar Vein (Figure 3). Elevated gold, silver and pathfinder
element anomalism was defined by last year’s soil geochemistry program and extensive rock chip
sampling program, which returned gold and silver grades up to 55.5g/t Au and 905g/t Ag vvi. In addition,
extensive zone of elevated induced polarisation resistivity underlying the encouraging geochemical
signatures are coincident with north trending zones of low magnetic responses, interpreted to be the
result of magnetite destructive hydrothermal alteration, represented compelling drill targets.
To date, drill assays have confirmed a sub-vertical mineralised vein and breccia trend with parallel
mineralised veins down to at least 183.4m depth and along a 1.4km strike length with mineralisation
open along strike and down dip.
Geological observations indicate that all drill holes intersected host rocks that are dominantly variably
altered quartz-eye and feldspar-phyric dacitic crystal lithic tuffs. A sedimentary unit of well bedded
sandstone-siltstone-mudstone was intersected in MM003 (170.9 to 176.67m) and MM005 (119.55 to
125.6m). Sericite and hematite alteration are commonly observed in the periphery of the main vein
trend with sericite increasing in intensity proximal to more abundant veined zones. The Mee Mar vein
trend is dominated by brecciated and crustiform-colloform banded chalcedony-quartz-adularia
bearing veins (± hematite, galena, low-Fe sphalerite and chalcopyrite).
Textural observations and interpretations of the chalcedony-quartz-sulphide bearing veins and breccia
intersected to date indicate drill holes have tested the lower chalcedonic superzone to upper
crustiform-colloform superzone. This interpretation is based on the observation of abundant
chalcedony dominant over crystalline quartz and is now supported by the widespread elevated levels
of Hg (up to 125ppm) and Sb (up to 216ppm) in drill assay results for most drill holes.
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 4 of 18
Figure 3: Mee Mar Prospect showing the location of completed diamond-cored drill holes and highlight drill
intercepts, over Sb soil sample results, which tested low sulphidation epithermal Au-Ag bearing veins with
anomalous pathfinder elements.
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 5 of 18
Table 1: Highlight drilling assay intervals from the Mee Mar Prospect
Hole ID
Interval
From (m)
To (m)
MM001
45.5
47.94
MM002
179.6
MM004
Width (m)
Au (g/t)
Ag (g/t)
Cu (%)
Pb (%)
Zn (%)
2.54
0.59
3.07
0.02
0.02
0.01
183.4
3.8
0.93
6.60
0.28
1.47
2.70
79
88
9
0.16
5.00
0.07
0.54
1.21
MM005
22
23
1
0.25
1.49
0.04
0.16
0.23
and
29
30
1
<0.01
0.35
0.01
0.1
0.32
and
31.55
34.45
2.9
0.33
3.58
0.17
0.49
0.16
MM006
62.2
65.1
2.9
0.30
3.08
0.26
0.8
0.26
MM007
1
3
2
0.22
0.68
0.28
<0.01
<0.01
and
24
25
1
0.23
0.67
0.27
<0.01
<0.01
and
84.5
89
4.5
0.81
2.18
0.07
0.13
0.06
MM008
57
63
6
3.56
10.95
0.22
1.89
4.58
and
93
94
1
0.64
5.29
0.10
0.65
0.98
MM009
145.2
146.83
1.63
1.10
7.76
0.19
1.82
2.58
The implication of the high levels of Hg, Sb and Au, when combined with the widths of mineralisation
is that a potentially wide, high-grade gold bearing boiling zone remains at depth. With increasing
depth towards the crystalline crustiform-colloform superzone there is also the potential for gold
grades to greatly increase. As such, with these high-grade results returning from the interpreted
higher-level zones of the system, there is great encouragement for further testing at depth targeting
the interpreted boiling zone.
The low sulphidation epithermal veins and breccias of the Mee Mar vein trend are open to the north
and south along strike, down dip and to surface. Structural observations from these holes show veins
strike north to north-north-east and have steeply west dipping (80o-85o) orientations for veins and
breccias and though true widths are not yet confirmed, they are estimated to be 70% to 100% of the
down hole interval. Drill hole details are provided in Table 3.
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 6 of 18
Bauloora Project background
Legacy Minerals has progressively developed the Bauloora Project through systematic exploration
work including geological mapping, rock chip sampling, gradient array IP surveying, detailed ground
magnetic surveying, ASTER data acquisition and interpretation, and widespread soil sampling. The
results from this work strongly support the assessment that there is significant potential for a major
low sulphidation epithermal-style gold-silver deposit at the Bauloora Project.
The Bauloora Project is located in the Central Lachlan Fold Belt NSW, which is host to world-class
copper-gold orebodies including the Cadia-Ridgeway, Northparkes, and Cowal Mines. It is in a zone
which is bounded to the west by the Gilmore Fault Zone and to the east by the Cootamundra Fault.
Bauloora contains structural remnants of Early Silurian dominantly dacitic volcanic rocks and related
granites, Siluro-Devonian sediments and felsic volcanic rocks deposited on a basement of Late
Ordovician turbidites, Late Ordovician to Early Silurian intermediate volcanic rocks and related
intrusions and sedimentary rocks vii.
Figure 4: Regional setting of the Bauloora Project viii, ix, x, xi, xii, xiii, xiv
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 7 of 18
Approved by the Board of Legacy Minerals Holdings Limited.
For more information:
Chris Byrne
Victoria Humphries
CEO & Managing Director
Media & Investor Relations
chris.byrne@legacyminerals.com.au
victoria@nwrcommunications.com.au
+61 (0) 499 527 547
+61 (0) 431 151 676
DISCLAIMER AND PREVIOUSLY REPORTED INFORMATION
Information in this announcement is extracted from reports lodged as market announcements referred to above
and available on the Company’s website https://legacyminerals.com.au/. The Company confirms that it is not
aware of any new information that materially affects the information included in the original market
announcement and that all material assumptions and technical parameters underpinning the estimates in the
relevant market announcement continue to apply and have not materially changed.
This announcement contains certain forward-looking statements. Forward looking statements are only
predictions and are subject to risks, uncertainties and assumptions which are outside of the control of Legacy
Minerals Holdings Limited (LGM). These risks, uncertainties and assumptions include commodity prices,
currency fluctuations, economic and financial market conditions, environmental risks and legislative, fiscal or
regulatory developments, political risks, project delay, approvals and cost estimates. Actual values, results or
events may be materially different to those contained in this announcement. Given these uncertainties, readers
are cautioned not to place reliance on forward-looking statements. Any forward-looking statements in this
announcement reflect the views of LGM only at the date of this announcement. Subject to any continuing
obligations under applicable laws and ASX Listing Rules, LGM does not undertake any obligation to update or
revise any information or any of the forward-looking statements in this announcement to reflect changes in
events, conditions or circumstances on which any forward-looking statements is based.
COMPETENT PERSON’S STATEMENT
The information in this Report that relates to Exploration Targets, Exploration Results, Mineral Resources or Ore
Reserves is based on information compiled by Thomas Wall, a Competent Person who is a Member of the
Australian Institute of Geoscientists. Mr Wall is the Technical Director and a full-time employee of Legacy
Minerals Pty Limited, the Company’s wholly-owned subsidiary, and a shareholder of the Company. Mr Wall has
sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and
to the activity being undertaken to qualify as a Competent Person as defined in the 2012 edition of the
Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Wall consents
to the inclusion of the matters based on his information in the form and context in which it appears in this
announcement.
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 8 of 18
About Legacy Minerals
Legacy Minerals is an ASX listed public company that has been involved in the acquisition and
exploration of gold, copper, and base-metal projects in the Lachlan Fold Belt since 2017. The Company
has seven projects that present significant discovery opportunities for shareholders.
Au-Cu (Pb-Zn) Cobar (EL9511)
Au Harden (EL8809, EL9257)
Undrilled targets next door to the Peak Gold Mines.
Several priority geophysical anomalies and gold in
lag up to 1.55g/t Au.
Large historical high-grade quartz-vein gold
mineralisation. Drilling includes 3.6m at 21.7g/t Au
116m and 2m at 17.17g/t Au from 111m.
Au-Ag Bauloora (EL8994, EL9464) Newmont JV
Au-Cu Fontenoy (EL8995) EARTH AI-Alliance
One of NSW’s largest low sulphidation epithermal
systems with a 27km2 epithermal vein field.
An 8km long zone of Au and Cu anomalism defined in
soil sampling and drilling. Significant drill intercepts
include 79m at 0.27% Cu from 1.5m.
Cu-Au Rockley (EL8296)
Sn-Ni-Cu Mulholland (EL9330) EARTH AI-Alliance
Prospective for porphyry Cu-Au and situated in the
Macquarie Arc Ordovician host rocks with historic
high-grade copper mines that graded up to 23% Cu.
Numerous tin and nickel occurrences with trends up
to 2.6km defined in drilling and significant intercepts
including 44m at 0.45% Ni.
Au-Ag Black Range (EL9466)
Extensive low sulphidation epithermal system with limited historical exploration.
Figure 5: Legacy Minerals Tenements, NSW, Australia viii,ix,x,xi,xii,xiii,xiv, xv
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 9 of 18
ENDNOTES
i ASX: LGM 4 April 2023 “Newmont Farm-in at Bauloora Project”
ii Howard, N., Halley, S., Pinder, J., Chambers, C. and Smith, R., Multi-element Geochemistry and Hydrothermal Alteration at
the Pajingo Low Sulfidation Epithermal Gold Deposit, SEG 2015 Conference
iii Vidal et al. (2021) The Cerro Negro Epithermal District, northwestern Deseado Massif (Patagonia, Argentina): New insight
from telescoped volcanic-hydrothermal systems, Journal of South American Earth Sciences
iv Buchanan, L. J. (1981) “Precious metal deposits associated with volcanic environments in the southwest,” Arizona Geol.
Soc. Digest, 14, pp. 237–261., Klondike Exploration Services, “Textural Zoning in Epithermal Quartz Veins”, Townsville:
Queensland 1995
v
ASX: LGM 21 November 2022 “New High-Grade Gold Assays Returned Across Bauloora”
vi
ASX: LGM 17 August 2022 “New High-Grade Gold Assays Returned Across Bauloora”
vii
Company’s Prospectus dated 28 July 2021 lodged 9 September 2021 (ASX: LGM)
viii CMOC Northparkes Mining and Technical Information
ix Alkane Resources Kaiser Resource Estimate of ~4.7M Gold Equivalent 27 February 2023
x Newcrest Mining Annual Mineral Resources and Ore Reserves Statement 17 February 2022
xi Evolution Mining 2022 Annual Report
xii Regis Resources Annual Mineral Resource and Ore Reserve Statement 8 June 2022
xiii Sandfire Resources NL 2019 Annual Report
xiv Alkane Resource and Reserve Statement FY22, 9 September 2022
xv
Silver Mines, Ord Minnett East coast Mining Conference, March 2023
Bowdens Mineral Equivalent: Bowdens silver equivalent: Ag Eq (g/t) = Ag (g/t) + 33.48*Pb (%) + 49.61*Zn (%) + 80*Au (g/t)
calculated from prices of US$20/oz silver, US$1.50/lb zinc, US$1.00/lb lead, US$1600/oz gold and metallurgical recoveries of
85% silver, 82% zinc and 83% lead, 85% gold estimated from test work commissioned by Silver Mines Limited.
Table 2: Major Mineral Resources of NSW
Project & Company
Mineral
Resource
Measured
Resource
Indicated
Inferred
Resource
Resource
Bowdens, NSW (Silver Mines Ltd)
396Moz AuEq
236 AgEq
88 AgEq
73 AgEq
Boda-Kaiser, NSW (Alkane Resources Ltd)
7.26Moz Au,
1.38Mt Cu
-
-
7.26Moz Au, 1.38Mt
Cu
Tomingley, NSW (Alkane Resources Ltd)
1.75Moz Au
0.13M Au
1.019Moz Au
0.59Moz
McPhillamys, NSW (Regis Resources Ltd)
2.29Moz Au
2.28Moz Au
0.001Moz Au
Cadia-Ridegway, NSW (Newcrest Mining
Ltd)
33.31Moz Au,
7.9Mt Cu
0.31Moz Au,
0.041Mt Cu
33Moz Au,
7.3Mt Cu
0.75Moz, 1.1Mt Cu
Cowal, NSW (Evolution Mining Limited)
9.618Moz Au
0.367Moz Au
7.33Moz Au
1.92Moz Au
Temora, NSW (Sandfire Resources Ltd)
2.2Moz 728kt
Cu
-
0.381Moz Au,
83kt Cu
1.8Moz Au, 645kt Cu
1.1Moz Au,
1.1Mt Cu
0.35Moz Au, 0.33Mt
Cu
Nth Parkes, NSW (CMOC Mining Pty Ltd
3.09Moz Au,
2.63Mt Cu
1.64Moz Au,
1.2Mt Cu
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 10 of 18
Appendix 1 - Bauloora Project, Mee Mar Prospect drill hole assay results
Table 3: Drill collar information.
Drill hole Collar Information
Hole ID
Easting (MGA94/55)
Northing (MGA94/55)
RL (m)
EOH (m)
Dip
Azimuth (True North)
MM001
589429
6176616
465
191.1
-50
90
MM002
589593
6177022
456
199.1
-50
270
MM003
589440
6177840
441
195.7
-50
90
MM004
589400
6177705
445
176.1
-50
90
MM005
589455
6177377
441
134.5
-50
75
MM006
589427
6176663
474
120.8
-50
90
MM007
589427
6176662
468
114.8
-75
90
MM008
589477
6176334
448
135.6
-50
90
MM009
589370
6176736
474
197
-50
90
MM010
589253
6176719
449
184.9
-50
90
Significant intervals defined using >=0.2g/t Au or >=10g/t Ag or >=0.25% Cu, >=0.25% Pb+Zn, >=1m downhole width, and <=1m internal
waste. All intercepts are down hole widths only, true widths are not calculated. Collar location and orientation information coordinates are
GDA94/MGA Zone 55, AHD RL. See Appendix 2 and 3 for additional details.
Table 4: Significant intervals.
Hole ID
Interval
From (m)
To (m)
Width (m)
Au (g/t)
Ag (g/t)
Cu (%)
Pb (%)
Zn (%)
MM001
45.5
47.94
2.54
0.59
3.07
0.02
0.02
0.01
and
55
56
1
0.01
1.00
0.29
0.01
0.01
and
161.3
164
2.7
0.01
2.37
0.31
<0.01
<0.01
MM002
179.6
183.4
3.8
0.93
6.60
0.28
1.47
2.70
MM003
No Significant Interval
MM004
79
88
9
0.16
5.00
0.07
0.54
1.21
and
131
132
1
0.11
0.79
0.01
0.07
0.68
MM005
22
23
1
0.25
1.49
0.04
0.16
0.23
and
29
30
1
<0.01
0.35
0.01
0.1
0.32
and
31.55
34.45
2.9
0.33
3.58
0.17
0.49
0.16
MM006
62.2
65.1
2.9
0.30
3.08
0.26
0.8
0.26
MM007
1
3
2
0.22
0.68
0.28
<0.01
<0.01
and
24
25
1
0.23
0.67
0.27
<0.01
<0.01
and
84.5
89
4.5
0.81
2.18
0.07
0.13
0.06
MM008
57
63
6
3.56
10.95
0.22
1.89
4.58
and
66
70
4
0.06
4.86
0.11
1.34
2.68
and
76.25
79
2.75
0.03
1.10
0.01
0.20
0.60
and
93
94
1
0.64
5.29
0.10
0.65
0.98
and
100
101
1
<0.01
0.53
0.03
0.21
0.13
MM009
145.2
146.83
1.63
1.10
7.56
0.19
1.82
2.58
MM010
No Significant Interval
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 11 of 18
Appendix 2 – JORC Code, 2021 Edition Table 1
Section 1 Sampling Techniques and Data
Criteria
JORC Code Explanation
Commentary
Nature and quality of sampling (e.g., cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments,
etc). These examples should not be taken as
limiting the broad meaning of sampling.
Core size was HQ core (diameter: 63.5mm) to
end of hole (EOH). LGM used a reputable drilling
contractor, Durock Drilling, with a suitable rig.
Diamond drill core provide a high-quality sample
that is logged for lithological, structural,
geotechnical, and other attributes. Subsampling of the core is carried out as per
industry best practice.
Downhole surveys of dip and azimuth are
conducted using a single shot camera every
30m, and using a downhole Gyro when
required, to detect deviations of the hole from
the planned dip and azimuth. The drill‐hole
collar locations are recorded using a hand‐held
GPS, which has an accuracy of +/‐ 5m. All drill‐
hole collars may be surveyed to a greater
degree of accuracy using a certified surveyor at
a later date.
An Olympus Vanta pXRF is used to spot analyse
the drill core onsite. Readings are taken to help
identify minerals and alteration with field
calibration of the pXRF instrument using
standards periodically performed.
Sampling
Techniques
The handheld pXRF results are only used for
preliminary assessment of element
compositions, prior to the receipt of assay
results from the certified laboratory.
Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
The drill core was orientated using suitable core
orientation tool by the drilling contractor with
LGM staff supervision. These orientations are
extended onto the remainder of the core and
meter marks for logging. The visible structural
features (veins, bedding, foliation, faults) are
measured against the core orientation marks.
The altered and veined intervals of drill core
were cut in half, and assayed at a certified assay
laboratory, ALS Laboratories. Core is prepared
for analysis by cutting along the longitudinal line
and then samples are numbered as per the predesigned cut-sheet. The core is selectively
sampled down the drill string at 1m nominal
intervals across the mineralised zones, unless
selected geological or mineralisation
boundaries. A certified sample standard is
inserted 1:50 samples. Standards may also be
added according to geology.
Where core was incompetent due to being
transported cover or weathered rock,
representative samples were collected along the
axis of the core.
Aspects of the determination of mineralisation
that are Material to the Public Report. In cases
where ‘industry standard’ work has been done
this would be relatively simple (e.g. ‘reverse
circulation drilling was used to obtain 1m samples
The drill core was cut by LGM staff. Samples
were transported to ALS Laboratory in Orange
for assaying. Samples are crushed to 6mm and
then pulverized to 85% passing 75 microns. A
50g split of the sample was fired assayed for
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 12 of 18
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there
is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation
types (e.g., submarine nodules) may warrant
disclosure of detailed information.
gold. The lower detection limit for gold is 0.002
ppm, which is believed to be an appropriate
detection level. All other elements including
copper and base metals (total 48 element suite)
are analysed using a 4-acid acid digest and an
ICP finish (ALS code: ME-MS61 + Au-AA22 + HgMS42).
Assay standards, blanks and duplicates were
analysed as part of the standard laboratory
analytical procedures. Company standards were
also introduced into the sampling stream at a
ratio of approximately 1 standard for every 50
samples.
Sample length: For selected core 1m sample
lengths except for minor changes due to
geological or mineralisation boundaries. Pulps
are retained by LGM for potential follow-up
analysis.
Drilling
techniques
Drill sample
recovery
Drill type (e.g., core, reverse circulation, open‐hole
hammer, rotary air blast, auger, Bangka, sonic,
etc) and details (e.g. core diametre, triple or
standard tube, depth of diamond tails,
facesampling bit or other type, whether core is
oriented and if so, by what method, etc).
Diamond drilling using industry standard
techniques. HQ core (diameter: 63.5mm) to end
of hole (EOH).
Method of recording and assessing core and chip
sample recoveries and results assessed.
Core recoveries were recorded during drilling
and reconciled during the core processing and
geological logging.
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Core is measured and marked after each drill
run using wooden blocks calibrating depth.
Adjusting rig procedures as necessary including,
drilling rate, run length and fluid pressure to
maintain sample integrity.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
To date, minimal sample recovery issues have
been identified that would impact on potential
sample bias in the competent fresh rocks that
host the mineralised intervals.
Systematic geological and geotechnical logging
was undertaken. Data collection where
appropriate includes:
• Nature and extent of lithologies.
• Relationship between lithologies.
Logging
Whether core and chip samples have been
geologically and geotechnically logged to a level
of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical
studies.
• Amount and mode of occurrence of ore
minerals.
• Location, extent and nature of structures such
as bedding, cleavage, veins, faults etc. Structural
data (alpha & beta) are recorded for orientated
core.
• Geotechnical data is collected as required
including recovery, RQD, fracture frequency,
qualitative IRS, microfractures, veinlets and
number of defect sets. For some geotechnical
holes the orientation, nature of defects and
defect fill may be recorded.
• Bulk density by Archimedes principle at
regular intervals may be taken.
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 13 of 18
• Magnetic susceptibility recorded at 1m
intervals for some holes as an orientation and
alteration characterisation tool.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc)
photography.
Logging records lithology, mineralogy,
mineralisation, veins, structures, weathering,
colour and other noticeable features. This is
generally qualitative except for % of sulphides
and vein mineral content. Core trays are
photographed in wet form.
The total length and percentage of the relevant
intersections logged.
All drill holes are geologically logged in full.
If core, whether cut or sawn and whether quarter,
half or all core taken.
Core was cut using a Husqvarna clipper saw with
core holding support. All samples are collected
from the same side of drill core. The full interval
of half-core sample is submitted for assay
analysis. Where core was incompetent due to
being transported cover, weathered rock, or
soft rock due to faulting, representative samples
were collected along the axis of the core. This
information is recorded in the cut-sheet and
loaded into database.
If non‐core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
Not applicable as results are for core drilling.
Drill core is cut in half along the length and the
total half core submitted as the sample. This
procedure meets industry standards where 50%
of the total sample taken from the diamond
core is submitted. All mineralised intervals and
surrounding wall rock were submitted for assay.
Sample weights are recorded by the lab.
Sub‐sampling
techniques and
sample
preparation
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Quality control procedures adopted for all
subsampling stages to maximise representivity of
samples.
Samples were delivered by Legacy Minerals
Holdings personnel to ALS Minerals Laboratory,
Orange NSW. Sample preparation will comprise
of an industry standard of drying, jaw crushing
and pulverising to -75 microns (85% passing)
(ALS code PUL-23). Pulverisers are washed with
QAQC tests undertaken (PUL-QC). Samples are
dried, crushed and pulverized to produce a
homogenous representative sub‐sample for
analysis.
Quality control procedures include submission
of Certified Reference Materials (standards) and
duplicates with each sample batch. QAQC
results are routinely reviewed to identify and
resolve any issues.
No sub-sampling is completed by LGM. All subsampling of the prepared core is completed by
the laboratory.
Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second‐half sampling.
The remaining half-core is stored and allows
assay values to be viewed against the geology;
and, where required, further samples may be
submitted for quality assurance. Quarter core
resampling may be completed in zones where
appropriate.
Whether sample sizes are appropriate to the grain
size of the material being sampled.
The sample sizes are appropriate to correctly
represent the mineralization based on style of
mineralisation.
SIGN UP TOLEGACY MINERALS
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 14 of 18
All samples were analysed by ALS Global.
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
Quality of
assay data and
laboratory
t
Share your feedback
Discover