Aggressive Exploration Underway at Bauloora with Newmont
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
6 JUNE 2023
Aggressive Exploration Program Commences at Bauloora under
Newmont Joint Venture
New epithermal veins discovered at surface as multifaceted geophysical, geochemical, and
geological programs commence across the project.
The Bauloora Project and Newmont Joint Venture
•
•
•
Bauloora is one of the largest low sulphidation epithermal systems in the Lachlan Fold Belt, NSW.
Legacy Minerals recently entered a $15M joint venture with Newmont Exploration Pty Ltd
(Newmont) at Bauloora in April 2023 i,1.
Newmont has extensive experience in the discovery and development of epithermal Au deposits
including at its formerly owned Pajingo mine (4.5Moz Au) ii and Cerro Negro, Argentina (7.1Moz) iii.
Systematic exploration programs aim to define high-value drill targets
•
•
Legacy Minerals and Newmont are undertaking an extensive program of geophysical and
geochemical works across the Bauloora Project.
The results of these programs will be used to plan the upcoming drill campaigns starting with the
Breccia Sinter Prospect in Q3/Q4 2023.
Geophysical Survey Underway – Audio-Magnetotellurics (AMT)
•
•
A large, 83 line-km survey has commenced covering over 10km2 of the Bauloora Vein Field with
the goal of defining resistive ‘feeder structures’ that may host high-grades of gold and silver.
AMT is a geophysical survey technique that has been successful in targeting low sulphidation
epithermal Au-Ag deposits around the world iv and will provide visibility to more than 1km depth.
Aerial Magnetics and Radiometrics
•
•
Fixed wing magnetics and radiometrics will be flown across the entire Bauloora Project.
This is large and detailed survey that will cover the entire 330km2 Bauloora Project, comprising
7,000 line km and will be flown at 50m spaced lines.
Discovery of new epithermal veins at surface
•
•
Sampling of rock chips has defined possible northern extensions of the Breccia Sinter Prospect
Soil geochemistry programs designed to infill the 15km2 are being completed.
Figure 1: Rock chip samples taken from the newly discovered veins at the Breccia Sinter Prospect. 7254 – Chalcedonyquartz-adularia cockade breccia. 7257 - Crustiform-colloform banded chalcedony-quartz-adularia and quartz after bladed
calcite vein. No sulphides observed. Note Cautionary statement about visible observations on Page 2.
1 Refer page 18, ENDNOTES for references.
Page 1 of 18 | ABN 43 650 398 897
3/203 Russel Street Bathurst, 2795
www.legacyminerals.com.au
ASX: LGM
Page 2 of 18
Legacy Minerals Holdings Limited (ASX: LGM, “LGM”, “the Company” or “Legacy Minerals”) is
pleased to provide an update on the exploration program at the Bauloora Epithermal Gold Project.
Management comment - Legacy Minerals CEO & Managing Director, Christopher Byrne said:
“Legacy Minerals is extremely pleased to get off to such an aggressive start to the exploration program
at Bauloora under the Newmont JV. We are focused on the discovery of a Tier One gold deposit at
Bauloora and our exploration program is clearly focussed on this objective.
With our joint venture partner Newmont, Legacy Minerals is now in the fortunate position to be able
fund and undertake these large, systematic surveys – at a scale and pace of exploration that is often
beyond the reach of a junior exploration company.
We will have detailed magnetic and radiometric surveys completed across the entire Bauloora
tenement. Further to this we will have AMT resistivity models that provide visibility down to over
1,000m depth across an entire 10km2 of the Bauloora vein field. This will vector our drilling towards
the resistive ‘feeder structures’ that may host high-grade gold-silver mineralisation in ore shoots on
veins.
These multifaceted programs will further build upon the extensive geochemical and geophysical data
the Company has systematically acquired. The result will be a comprehensive data set and we look
forward to updating our shareholders on the drill targets generated.”
Figure 2: AMT Survey Site, Breccia Sinter Prospect
Cautionary Note – Visual estimates of mineralisation: References in this announcement to visual results are from rock
chip sampling taking at surface and are provided to show the textural observations. Fresh sulphide mineralisation may
consist of chalcopyrite, galena, sphalerite and pyrite in stringers, veins, and as disseminations. Laboratory assays are
required for metal content abundance. All rocks have been sampled for laboratory analysis.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 3 of 18
Audio Magnetotelluric (AMT) survey
The Company is completing an initial, large-scale, 80 line-km AMT survey over the Bauloora Vein Field.
Geophysical contractors Quantec and AGS have now been engaged to complete this work. The survey
will cover approximately 10km2 with 200m spaced lines with the objective of the survey to identify
and target large, potentially deeper and strike extensive resistivity anomalies that may represent
zones of silicification associated with epithermal veining. It is expected that the survey will provide
quality resistivity datasets to depths greater than 1,000m.
MT surveys such as AMT have proven success globally in the delineation of subsurface zones of
silicification, even beneath areas of high-level silica and steam-heated clay alteration, which can be
expected in the upper portions of a completely preserved epithermal system such as that interpreted
at Bauloora.
The AMT survey will expand upon the knowledge gained from the Companies Gradient Array Induced
Polarisation survey v which demonstrated that linear resistive trends at Bauloora are commonly
associated with mapped quartz veins and silicic alteration on surface. The AMT survey will provide a
depth and dip parameter to previously identified resistive trends, and add further clarity to the
magnitude of these trends and mapped zones of silicification.
The survey will be completed in two phases. The first phase will focus on the Breccia Sinter Prospect
which will be tightened to 100m spaced lines over the main area of geochemical anomalism. The
second phase will cover the broader Bauloora vein field including the Mee Mar vein trend where wide
and strike extensive epithermal veins were intercepted in diamond drilling early this year, and a new
discovery at the Bluecap Prospect which returned 13m at 4.53g/t AuEq including. 6m at 8.00g/t AuEq
from 57m (13m at 1.66g/t Au, 6.68g/t Ag, 0.14% Cu and 4.23% Pb+Zn incl. 6m at 3.56g/t Au, 10.95g/t
Ag, 0.22% Cu and 6.47% Pb+Zn) vi.
The 3D modelling of the AMT survey results over the Breccia Sinter has been prioritised to increase
the Company’s understanding of the geological terrain and refine the low-sulphidation epithermal
gold exploration model for the project. Subsequent study of the results will focus on targeting the
potential boiling zone level (Buchanan’s precious metal interval) with diamond drilling later this year.
About AMT
Audio-Magnetotellurics (AMT) is a passive geophysical method which uses natural time variations of
the Earth's magnetic and electric fields to measure the electrical resistivity of the sub-surface rocks.
Electrical resistivity of rocks and minerals is an important physical property to measure as part of
attempts to understand geological structure, alteration, veining and lithology. It varies by many orders
of magnitude which allows for the differentiation of very resistive zones of silicification and quartz
veining from more conductive sedimentary rocks or saline clay gouge faults. As measured by the
magnetotelluric method, the resistivity obtained is a bulk property of a volume of earth material and
is associated with factors such as rock composition, porosity and permeability as well as rock fluid
composition and temperature.
- Extract from Geoscience Australia, Australian Commonwealth Governmentiv
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 4 of 18
Figure 3: Planned AMT survey area over mapped vein field
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 5 of 18
Rock Chip Sample Textures
Figure 4 and Figure 5: 7305 – Custiform-colloform quartz-adularia vein clasts within quartz-hematite breccia. No
sulphides observed. 7299 – Crustiform quartz-chalcedony vein with quartz after calcite. No sulphides observed.
Figure 6 and Figure 7: 7247 - Chalcedony-quartz-adularia cockade breccia with possible ginguro banding. 7228 Colloform-crustiform chalcedony-quartz-adularia vein. No sulphides observed.
Figure 8 and Figure 9: 7250 - Colloform-crustiform quartz-chalcedony-adularia vein and quartz-hematiteadularia cockade breccia. No sulphides observed. 7255 - Crustiform-colloform quartz-chalcedony-adularia vein
with quartz after bladed calcite and possible ginguro bands.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 6 of 18
Figure 10: Recent reconnaissance rock sample locations over Sb soil sample results and DEM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 7 of 18
Infill Soil Programs
Figure 11: Infill soil sample program (white polygons) over Sb soil sample results and DEM
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 8 of 18
Vein Field Mapping
Detailed geological mapping of the known low-sulphidation epithermal Au-Ag bearing vein field is
anticipated to commence in the next couple of months and will focus on delineation of surface vein
trends, lithological boundaries, and structural controls to vein deposition. This campaign is anticipated
to take approximately six weeks to complete. Upon completion the new solid geology map will
significantly enhance in the interpretation of surface geochemical results by providing a lithological
and structural context, will assist in interpretation of geophysical data sets, and provide the basis for
a new 3D geological model of the Project. Further to this there is the potential for discovery of
previously unrecognised vein trends and alteration zones. Recently completed soil sampling and
reconnaissance rock chip sampling discovered multiple new low-sulphidation vein occurrences (Figure
12) which will form the basis of future mapping activities.
Figure 12: 7344 – Crustiform-colloform chalcedony-quartz-adularia-hematite vein. No sulphides observed.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 9 of 18
Fixed-wing Magnetic and Radiometric Survey
The Company plans to commence a tenement wide (EL8994 and EL9464) fixed-wing magnetic and
radiometric survey. Geophysical contractors Thomson Aviation have been engaged to complete the
survey. Flight lines will be at 50m line spacing at a height of ~60m and will provide high quality
magnetic and radiometric survey data which will greatly improve upon the currently available low
resolution the 200m and 250m line spaced surveys over the tenement.
These datasets will greatly enhance the ability to interpret controls to mineralisation across the
tenement by the detection of demagnetisation due to magnetite-destructive alteration of the host
volcanic rocks and elevated K:Th which may represent illite-adularia alteration. These data may help
define the location of potential high-grade Au-Ag-basemetal bearing ore-shoots.
Figure 13: Current Bauloora vein field precompetitive regional magnetics (200m spaced lines) overlain by
ground magnetics reduced-to-pole (RTP) (50m spaced lines).
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 10 of 18
About the Bauloora Project
Legacy Minerals’ Bauloora Project is located in the Lachlan Fold Belt of New South Wales which is host
to world-class copper-gold orebodies including the Cadia-Ridgeway, Northparkes, and Cowal Mines.
In 2023, Newmont Exploration Pty Ltd entered into a Farm-In and Joint Venture on the Project. It
covers a large hydrothermal alteration zone 27km2 in size, within which is an anomalous gold zone
currently mapped to 15km2. Rock chip and soil samples collected by the Company from the project
area have highlighted several priority areas of anomalous precious metal values with highly
anomalous values of epithermal pathfinders vii. The drilling of the first of these targets resulted in the
discovery of the Bluecap prospect returning 13m at 4.53g/t AuEq including 6m at 8.00g/t AuEq from
57mvi.
Extensive epithermal alteration exists on the project, including widespread zones of high-level
chalcedonic veins, clay alteration and local sinter formations. The project has seen very limited
exploration drilling and the Company believes the results from work to date strongly support the
assessment that there is significant potential for a major low sulphidation epithermal-style gold-silver
deposit at the Bauloora Project.
Figure 14: Regional setting of the Bauloora Project viii, ix, x, xi, xii, xiii, xiv
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 11 of 18
Approved by the Board of Legacy Minerals Holdings Limited.
For more information:
Chris Byrne
Victoria Humphries
CEO & Managing Director
Media & Investor Relations
chris.byrne@legacyminerals.com.au
victoria@nwrcommunications.com.au
+61 (0) 499 527 547
+61 (0) 431 151 676
DISCLAIMER AND PREVIOUSLY REPORTED INFORMATION
Information in this announcement is extracted from reports lodged as market announcements referred to above
and available on the Company’s website https://legacyminerals.com.au/. The Company confirms that it is not
aware of any new information that materially affects the information included in the original market
announcement and that all material assumptions and technical parameters underpinning the estimates in the
relevant market announcement continue to apply and have not materially changed.
This announcement contains certain forward-looking statements. Forward looking statements are only
predictions and are subject to risks, uncertainties and assumptions which are outside of the control of Legacy
Minerals Holdings Limited (LGM). These risks, uncertainties and assumptions include commodity prices,
currency fluctuations, economic and financial market conditions, environmental risks and legislative, fiscal or
regulatory developments, political risks, project delay, approvals and cost estimates. Actual values, results or
events may be materially different to those contained in this announcement. Given these uncertainties, readers
are cautioned not to place reliance on forward-looking statements. Any forward-looking statements in this
announcement reflect the views of LGM only at the date of this announcement. Subject to any continuing
obligations under applicable laws and ASX Listing Rules, LGM does not undertake any obligation to update or
revise any information or any of the forward-looking statements in this announcement to reflect changes in
events, conditions or circumstances on which any forward-looking statements is based.
COMPETENT PERSON’S STATEMENT
The information in this Report that relates to Exploration Targets, Exploration Results, Mineral Resources or Ore
Reserves is based on information compiled by Thomas Wall, a Competent Person who is a Member of the
Australian Institute of Geoscientists. Mr Wall is the Technical Director and a full-time employee of Legacy
Minerals Pty Limited, the Company’s wholly-owned subsidiary, and a shareholder of the Company. Mr Wall has
sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and
to the activity being undertaken to qualify as a Competent Person as defined in the 2012 edition of the
Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Wall consents
to the inclusion of the matters based on his information in the form and context in which it appears in this
announcement.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 12 of 18
About Legacy Minerals
Legacy Minerals is an ASX listed public company that has been involved in the acquisition and
exploration of gold, copper, and base-metal projects in the Lachlan Fold Belt since 2017. The Company
has seven projects that present significant discovery opportunities for shareholders.
Au-Cu (Pb-Zn) Cobar (EL9511)
Au Harden (EL8809, EL9257)
Undrilled targets next door to the Peak Gold Mines.
Several priority geophysical anomalies and gold in
lag up to 1.55g/t Au.
Large historical high-grade quartz-vein gold
mineralisation. Drilling includes 3.6m at 21.7g/t Au
116m and 2m at 17.17g/t Au from 111m.
Au-Ag Bauloora (EL8994, EL9464) Newmont JV
Au-Cu Fontenoy (EL8995) EARTH AI-Alliance
One of NSW’s largest low sulphidation epithermal
systems with a 27km2 epithermal vein field.
An 8km long zone of Au and Cu anomalism defined
in soil sampling and drilling. Significant drill
intercepts include 79m at 0.27% Cu from 1.5m.
Cu-Au Rockley (EL8296)
Sn-Ni-Cu Mulholland (EL9330) EARTH AI-Alliance
Prospective for porphyry Cu-Au and situated in the
Macquarie Arc Ordovician host rocks with historic
high-grade copper mines that graded up to 23% Cu.
Numerous tin and nickel occurrences with trends up
to 2.6km defined in drilling and significant
intercepts including 44m at 0.45% Ni.
Au-Ag Black Range (EL9466)
Extensive low sulphidation epithermal system with limited historical exploration.
Figure 15: Legacy Minerals Tenements, NSW, Australia viii,ix,x,xi,xii,xiii,xiv, xv
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 13 of 18
ENDNOTES
i
ASX: LGM April 5 2023: Newmont Farm-in at Bauloora Project
ii Howard, N., Halley, S., Pinder, J., Chambers, C. and Smith, R., Multi-element Geochemistry and Hydrothermal Alteration at
the Pajingo Low Sulfidation Epithermal Gold Deposit, SEG 2015 Conference
iii Vidal et al. (2021) The Cerro Negro Epithermal District, northwestern Deseado Massif (Patagonia, Argentina): New insight
from telescoped volcanic-hydrothermal systems, Journal of South American Earth Sciences
iv
Geoscience Australia, Australian Government, Magnetotellurics 4 April 2023 https://www.ga.gov.au/scientifictopics/disciplines/geophysics/magnetotellurics#:~:text=Magnetotellurics%20(MT)%20is%20a%20passive,resistivity%20of%
20the%20sub%2Dsurface.
v ASX: March 16 2023: LGM Drilling Assays Confirm New Epithermal Discovery at Bauloora
vi ASX: May 10 2023 LGM Drilling Assays Confirm New Epithermal Discovery at Bauloora
vii
ASX: LGM November 2021 New High-Grade Gold Assays Returned Across Bauloora
viii CMOC Northparkes Mining and Technical Information
ix Alkane Resources Kaiser Resource Estimate of ~4.7M Gold Equivalent 27 February 2023
x Newcrest Mining Annual Mineral Resources and Ore Reserves Statement 17 February 2022
xi Evolution Mining 2022 Annual Report
xii Regis Resources Annual Mineral Resource and Ore Reserve Statement 8 June 2022
xiii Sandfire Resources NL 2019 Annual Report
xiv Alkane Resource and Reserve Statement FY22, 9 September 2022
xv
Silver Mines, Ord Minnett East coast Mining Conference, March 2023
Bowdens Mineral Equivalent: Bowdens silver equivalent: Ag Eq (g/t) = Ag (g/t) + 33.48*Pb (%) + 49.61*Zn (%) + 80*Au (g/t)
calculated from prices of US$20/oz silver, US$1.50/lb zinc, US$1.00/lb lead, US$1600/oz gold and metallurgical recoveries of
85% silver, 82% zinc and 83% lead, 85% gold estimated from test work commissioned by Silver Mines Limited.
Table 2Error! Main Document Only.: Major Mineral Resources of NSW
Project & Company
Mineral
Resource
Measured
Resource
Indicated
Inferred
Resource
Resource
Bowdens, NSW (Silver Mines Ltd)
396Moz AuEq
236 AgEq
88 AgEq
73 AgEq
Boda-Kaiser, NSW (Alkane Resources Ltd)
7.26Moz Au,
1.38Mt Cu
-
-
7.26Moz Au, 1.38Mt
Cu
Tomingley, NSW (Alkane Resources Ltd)
1.75Moz Au
0.13M Au
1.019Moz Au
0.59Moz
McPhillamys, NSW (Regis Resources Ltd)
2.29Moz Au
2.28Moz Au
0.001Moz Au
Cadia-Ridegway, NSW (Newcrest Mining
Ltd)
33.31Moz Au,
7.9Mt Cu
0.31Moz Au,
0.041Mt Cu
33Moz Au,
7.3Mt Cu
0.75Moz, 1.1Mt Cu
Cowal, NSW (Evolution Mining Limited)
9.618Moz Au
0.367Moz Au
7.33Moz Au
1.92Moz Au
Temora, NSW (Sandfire Resources Ltd)
2.2Moz 728kt
Cu
-
0.381Moz Au,
83kt Cu
1.8Moz Au, 645kt Cu
1.1Moz Au,
1.1Mt Cu
0.35Moz Au, 0.33Mt
Cu
Nth Parkes, NSW (CMOC Mining Pty Ltd
3.09Moz Au,
2.63Mt Cu
1.64Moz Au,
1.2Mt Cu
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 14 of 18
Appendix 1 – JORC Code, 2021 Edition Table 1
Section 1 Sampling Techniques and Data
Criteria
Sampling
Techniques
Drilling
techniques
Drill sample
recovery
Logging
JORC Code Explanation
Commentary
Nature and quality of sampling (e.g., cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments,
etc). These examples should not be taken as
limiting the broad meaning of sampling.
Rock chip and grab samples were taken from
numerous locations throughout the prospect
areas.
Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
The purpose of the rock chip samples was to
establish the tenor of any mineralisation visible
in outcrop and float. Therefore, the samples are
biased towards mineralised samples. This is
appropriate for this type of work.
Aspects of the determination of mineralisation
that are Material to the Public Report. In cases
where ‘industry standard’ work has been done this
would be relatively simple (e.g. ‘reverse circulation
drilling was used to obtain 1m samples from which
3 kg was pulverised to produce a 30 g charge for
fire assay’). In other cases more explanation may
be required, such as where there is coarse gold
that has inherent sampling problems. Unusual
commodities or mineralisation types (e.g.,
submarine nodules) may warrant disclosure of
detailed information.
Samples weighing up to several kilograms were
taken.
Drill type (e.g., core, reverse circulation, open‐hole
hammer, rotary air blast, auger, Bangka, sonic,
etc) and details (e.g. core diametre, triple or
standard tube, depth of diamond tails,
facesampling bit or other type, whether core is
oriented and if so, by what method, etc).
Not Applicable. No drilling conducted.
Method of recording and assessing core and chip
sample recoveries and results assessed.
Not Applicable. No drilling conducted.
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Not Applicable. No drilling conducted.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
Not Applicable. No drilling conducted.
Whether core and chip samples have been
geologically and geotechnically logged to a level
of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical
studies.
Geological logging is carried out on all rock
chips with lithology, alteration, mineralisation,
structure and veining recorded.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc)
photography.
The total length and percentage of the relevant
intersections logged.
Logging of rock chips records lithology,
mineralogy, mineralisation, structures,
weathering, colour and other noticeable
features. Rock chips are occasionally
photographed for reference.
Not Applicable. No drilling conducted.
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 15 of 18
If core, whether cut or sawn and whether quarter,
half or all core taken.
If non‐core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
Sub‐sampling
techniques and
sample
preparation
Not Applicable. No drilling conducted.
Not Applicable. No drilling conducted.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Samples were delivered by Legacy Minerals
Holdings personnel to ALS Minerals Laboratory,
Orange NSW. Sample preparation will comprise
of an industry standard of drying, jaw crushing
and pulverising to -75 microns (85% passing)
(ALS code PUL-23). Pulverisers are washed with
QAQC tests undertaken (PUL-QC). Samples are
dried, crushed and pulverized to produce a
homogenous representative sub‐sample for
analysis.
Quality control procedures adopted for all
subsampling stages to maximise representivity of
samples.
Laboratory QC procedures for rock sample
assays involve the use of internal certified
reference material as assay standards, along
with blanks and duplicates.
Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second‐half sampling.
Not appropriate for this stage of exploration.
Whether sample sizes are appropriate to the grain
size of the material being sampled.
The size of samples for the rock chips is
appropriate for this stage of exploration.
All samples were analysed by ALS Global.
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
Quality of
assay data and
laboratory
tests
For geophysical tools, spectrometres, handheld
XRF instruments, etc, the parametres used in
determining the analysis including instrument
make and model, reading times, calibrations
factors applied and their derivation, etc.
Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy
(i.e. lack of bias) and precision have been
established.
Verification of
sampling and
assaying
Samples are crushed to 6mm and then
pulverized to 85% passing 75 microns. Gold is
determined using a 50g charge. The resultant
prill is dissolved in aqua regia with gold
determined by flame AAS. The lower detection
limit for gold is 0.002 ppm, which is believed to
be an appropriate detection level. All other
elements (total 48 element suite) are analysed
using a 4-acid acid digest and an ICP finish (ALS
code: ME-MS61 + Au-AA22 + Hg-MS42).
All samples were analysed by ALS Global.
Gold is determined using a 50g charge. The
resultant prill is dissolved in aqua regia with
gold determined by flame AAS. 34 elements by
four acid digest (Method ME-ICP61).
Not Applicable. No geophysical tools used.
The verification of significant intersections by
either independent or alternative company
personnel.
Significant intersections are verified by the
Company’s technical staff.
The use of twinned holes.
No twinned holes have been planned for the
current drill programme.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Primary data is captured onto a laptop through
excel and using Datashed software and includes
geological logging, sample data and QA/QC
information. This data, together with the assay
data, is stored both locally and entered into the
SIGN UP TO LEGACY MINERALS’
INTERACTIVE INVESTOR HUB
ASX: LGM
Page 16 of 18
LGM central online database which is managed
by external consultants.
All primary assay data is received from the
laboratory as electronic data files which are
imported into sampling database with
verification procedures in place. QAQC analysis
is undertaken for each laboratory report
Location of
data points
Discuss any adjustment to assay data.
No adjustments or calibrations will be made to
any primary assay data collected for the
purpose of reporting assay grades and
mineralised intervals. For the geological
analysis, standards and recognised factors may
be used to calculate the oxide form assayed
elements, or to calculate volatile free mineral
levels in rocks.
Accuracy and quality of surveys used to locate drill
holes (collar and down‐hole surveys), trenches,
mine workings and other locations used in Mineral
Resource estimation.
A handheld Garmin GPSmap 65 was used to
pick up locations of samples with an averaged
accuracy of 1m.
Specification of the grid system used.
The grid system used is GDA94, MGA Zone 55.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration Results.
Data spacing
and
distribution
Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s)
and classifications applied. Whether sample
compositing has been applied.
Whether sample compositing has been applied.
Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the
deposit type.
Orientation of
data in
relation to
geological
structure
Using government data topography and 2017
DTM data. A topographic surface has been
created using this elevation data.
Rock chip spacing is applicable to the
reconnaissance nature of the work.
No mineral resource or reserve calculation has
been applied.
No compositing has been applied to the
exploration results.
The drill holes are orientated to intersect the
dipping mineralised trends at as near
perpendicular orientation possible (unless
otherwise stated).
The orientation of key structures may be locally
variable and any relationship to mineralisation
has yet to be identified.
The orientation of drilling relative to key
mineralised structures is not considered likely
to introduce sampling bias.
If the relationship between the drilling orientation
and the orientation of key mineralised structures
is considered to have introduced a sampling bias,
this should be assessed and reported if material.
Orientation of the mineralisation and structural
trends is constrained by previous drilling and
outcrop.
The orientation of sampling is considered
appropriate for the current geological
interpretation of the mineral style.
No sample bias due to drilling orie
Share your feedback
Discover